### Refine

#### Year of publication

- 2013 (8) (remove)

#### Has Fulltext

- yes (8) (remove)

#### Keywords

#### Institute

- Mathematik (8) (remove)

In a paper of 1996 the british mathematician Graham R. Allan posed the question, whether the product of two stable elements is again stable. Here stability describes the solvability of a certain infinite system of equations. Using a method from the theory of homological algebra, it is proved that in the case of topological algebras with multiplicative webs, and thus in all common locally convex topological algebras that occur in standard analysis, the answer of Allan's question is affirmative.

This work investigates the industrial applicability of graphics and stream processors in the field of fluid simulations. For this purpose, an explicit Runge-Kutta discontinuous Galerkin method in arbitrarily high order is implemented completely for the hardware architecture of GPUs. The same functionality is simultaneously realized for CPUs and compared to GPUs. Explicit time steppings as well as established implicit methods are under consideration for the CPU. This work aims at the simulation of inviscid, transsonic flows over the ONERA M6 wing. The discontinuities which typically arise in hyperbolic equations are treated with an artificial viscosity approach. It is further investigated how this approach fits into the explicit time stepping and works together with the special architecture of the GPU. Since the treatment of artificial viscosity is close to the simulation of the Navier-Stokes equations, it is reviewed how GPU-accelerated methods could be applied for computing viscous flows. This work is based on a nodal discontinuous Galerkin approach for linear hyperbolic problems. Here, it is extended to non-linear problems, which makes the application of numerical quadrature obligatory. Moreover, the representation of complex geometries is realized using isoparametric mappings. Higher order methods are typically very sensitive with respect to boundaries which are not properly resolved. For this purpose, an approach is presented which fits straight-sided DG meshes to curved geometries which are described by NURBS surfaces. The mesh is modeled as an elastic body and deformed according to the solution of closest point problems in order to minimize the gap to the original spline surface. The sensitivity with respect to geometry representations is reviewed in the end of this work in the context of shape optimization. Here, the aerodynamic drag of the ONERA M6 wing is minimized according to the shape gradient which is implicitly smoothed within the mesh deformation approach. In this context a comparison to the classical Laplace-Beltrami operator is made in a Stokes flow situation.

The Hadamard product of two holomorphic functions which is defined via a convolution integral constitutes a generalization of the Hadamard product of two power series which is obtained by pointwise multiplying their coefficients. Based on the integral representation mentioned above, an associative law for this convolution is shown. The main purpose of this thesis is the examination of the linear and continuous Hadamard convolution operators. These operators map between spaces of holomorphic functions and send - with a fixed function phi " a function f to the convolution of phi and f. The transposed operator is computed and turns out to be a Hadamard convolution operator, too, mapping between spaces of germs of holomorphic functions. The kernel of Hadamard convolution operators is investigated and necessary and sufficient conditions for those operators to be injective or to have dense range are given. In case that the domain of holomorphy of the function phi allows a Mellin transform of phi, certain (generalized) monomials are identified as eigenfunctions of the corresponding operator. By means of this result and some extract of the theory of growth of entire functions, further propositions concerning the injectivity, the denseness of the range or the surjectivity of Hadamard convolution operators are shown. The relationship between Hadamard convolution operators, operators which are defined via the convolution with an analytic functional and differential operators of infinite order is investigated and the results which are obtained in the thesis are put into the research context. The thesis ends with an application of the results to the approximation of holomorphic functions by lacunary polynomials. On the one hand, the question under which conditions lacunary polynomials are dense in the space of all holomorphic functions is investigated and on the other hand, the rate of approximation is considered. In this context, a result corresponding to the Bernstein-Walsh theorem is formulated.

Copositive programming is concerned with the problem of optimizing a linear function over the copositive cone, or its dual, the completely positive cone. It is an active field of research and has received a growing amount of attention in recent years. This is because many combinatorial as well as quadratic problems can be formulated as copositive optimization problems. The complexity of these problems is then moved entirely to the cone constraint, showing that general copositive programs are hard to solve. A better understanding of the copositive and the completely positive cone can therefore help in solving (certain classes of) quadratic problems. In this thesis, several aspects of copositive programming are considered. We start by studying the problem of computing the projection of a given matrix onto the copositive and the completely positive cone. These projections can be used to compute factorizations of completely positive matrices. As a second application, we use them to construct cutting planes to separate a matrix from the completely positive cone. Besides the cuts based on copositive projections, we will study another approach to separate a triangle-free doubly nonnegative matrix from the completely positive cone. A special focus is on copositive and completely positive programs that arise as reformulations of quadratic optimization problems. Among those we start by studying the standard quadratic optimization problem. We will show that for several classes of objective functions, the relaxation resulting from replacing the copositive or the completely positive cone in the conic reformulation by a tractable cone is exact. Based on these results, we develop two algorithms for solving standard quadratic optimization problems and discuss numerical results. The methods presented cannot immediately be adapted to general quadratic optimization problems. This is illustrated with examples.

Design and structural optimization has become a very important field in industrial applications over the last years. Due to economical and ecological reasons, the efficient use of material is of highly industrial interest. Therefore, computational tools based on optimization theory have been developed and studied in the last decades. In this work, different structural optimization methods are considered. Special attention lies on the applicability to three-dimensional, large-scale, multiphysic problems, which arise from different areas of the industry. Based on the theory of PDE-constraint optimization, descent methods in structural optimization require knowledge of the (partial) derivatives with respect to shape or topology variations. Therefore, shape and topology sensitivity analysis is introduced and the connection between both sensitivities is given by the Topological-Shape Sensitivity Method. This method leads to a systematic procedure to compute the topological derivative by terms of the shape sensitivity. Due to the framework of moving boundaries in structural optimization, different interface tracking techniques are presented. If the topology of the domain is preserved during the optimization process, explicit interface tracking techniques, combined with mesh-deformation, are used to capture the interface. This techniques fit very well the requirements in classical shape optimization. Otherwise, an implicit representation of the interface is of advantage if the optimal topology is unknown. In this case, the level set method is combined with the concept of the topological derivative to deal with topological perturbation. The resulting methods are applied to different industrial problems. On the one hand, interface shape optimization for solid bodies subject to a transient heat-up phase governed by both linear elasticity and thermal stresses is considered. Therefore, the shape calculus is applied to coupled heat and elasticity problems and a generalized compliance objective function is studied. The resulting thermo-elastic shape optimization scheme is used for compliance reduction of realistic hotplates. On the other hand, structural optimization based on the topological derivative for three-dimensional elasticity problems is observed. In order to comply typical volume constraints, a one-shot augmented Lagrangian method is proposed. Additionally, a multiphase optimization approach based on mesh-refinement is used to reduce the computational costs and the method is illustrated by classical minimum compliance problems. Finally, the topology optimization algorithm is applied to aero-elastic problems and numerical results are presented.

In der modernen Survey-Statistik treten immer häufifiger Optimierungsprobleme auf, die es zu lösen gilt. Diese sind oft von hoher Dimension und Simulationsstudien erfordern das mehrmalige Lösen dieser Optimierungsprobleme. Um dies in angemessener Zeit durchführen zu können, sind spezielle Algorithmen und Lösungsansätze erforderlich, welche in dieser Arbeit entwickelt und untersucht werden. Bei den Optimierungsproblemen handelt es sich zum einen um Allokationsprobleme zur Bestimmung optimaler Teilstichprobenumfänge. Hierbei werden neben auf einem Nullstellenproblem basierende, stetige Lösungsmethoden auch ganzzahlige, auf der Greedy-Idee basierende Lösungsmethoden untersucht und die sich ergebenden Optimallösungen miteinander verglichen.Zum anderen beschäftigt sich diese Arbeit mit verschiedenen Kalibrierungsproblemen. Hierzu wird ein alternativer Lösungsansatz zu den bisher praktizierten Methoden vorgestellt. Dieser macht das Lösen eines nichtglatten Nullstellenproblemes erforderlich, was mittels desrnnichtglatten Newton Verfahrens erfolgt. Im Zusammenhang mit nichtglatten Optimierungsalgorithmen spielt die Schrittweitensteuerung eine große Rolle. Hierzu wird ein allgemeiner Ansatz zur nichtmonotonen Schrittweitensteuerung bei Bouligand-differenzierbaren Funktionen betrachtet. Neben der klassischen Kalibrierung wird ferner ein Kalibrierungsproblem zur kohärenten Small Area Schätzung unter relaxierten Nebenbedingungen und zusätzlicher Beschränkung der Variation der Designgewichte betrachtet. Dieses Problem lässt sich in ein hochdimensionales quadratisches Optimierungsproblem umwandeln, welches die Verwendung von Lösern für dünn besetzte Optimierungsprobleme erfordert.Die in dieser Arbeit betrachteten numerischen Probleme können beispielsweise bei Zensen auftreten. In diesem Zusammenhang werden die vorgestellten Ansätze abschließend in Simulationsstudien auf eine mögliche Anwendung auf den Zensus 2011 untersucht, die im Rahmen des Zensus-Stichprobenforschungsprojektes untersucht wurden.

In this thesis, global surrogate models for responses of expensive simulations are investigated. Computational fluid dynamics (CFD) have become an indispensable tool in the aircraft industry. But simulations of realistic aircraft configurations remain challenging and computationally expensive despite the sustained advances in computing power. With the demand for numerous simulations to describe the behavior of an output quantity over a design space, the need for surrogate models arises. They are easy to evaluate and approximate quantities of interest of a computer code. Only a few number of evaluations of the simulation are stored for determining the behavior of the response over a whole range of the input parameter domain. The Kriging method is capable of interpolating highly nonlinear, deterministic functions based on scattered datasets. Using correlation functions, distinct sensitivities of the response with respect to the input parameters can be considered automatically. Kriging can be extended to incorporate not only evaluations of the simulation, but also gradient information, which is called gradient-enhanced Kriging. Adaptive sampling strategies can generate more efficient surrogate models. Contrary to traditional one-stage approaches, the surrogate model is built step-by-step. In every stage of an adaptive process, the current surrogate is assessed in order to determine new sample locations, where the response is evaluated and the new samples are added to the existing set of samples. In this way, the sampling strategy learns about the behavior of the response and a problem-specific design is generated. Critical regions of the input parameter space are identified automatically and sampled more densely for reproducing the response's behavior correctly. The number of required expensive simulations is decreased considerably. All these approaches treat the response itself more or less as an unknown output of a black-box. A new approach is motivated by the assumption that for a predefined problem class, the behavior of the response is not arbitrary, but rather related to other instances of the mutual problem class. In CFD, for example, responses of aerodynamic coefficients share structural similarities for different airfoil geometries. The goal is to identify the similarities in a database of responses via principal component analysis and to use them for a generic surrogate model. Characteristic structures of the problem class can be used for increasing the approximation quality in new test cases. Traditional approaches still require a large number of response evaluations, in order to achieve a globally high approximation quality. Validating the generic surrogate model for industrial relevant test cases shows that they generate efficient surrogates, which are more accurate than common interpolations. Thus practical, i.e. affordable surrogates are possible already for moderate sample sizes. So far, interpolation problems were regarded as separate problems. The new approach uses the structural similarities of a mutual problem class innovatively for surrogate modeling. Concepts from response surface methods, variable-fidelity modeling, design of experiments, image registration and statistical shape analysis are connected in an interdisciplinary way. Generic surrogate modeling is not restricted to aerodynamic simulation. It can be applied, whenever expensive simulations can be assigned to a larger problem class, in which structural similarities are expected.

Krylov subspace methods are often used to solve large-scale linear equations arising from optimization problems involving partial differential equations (PDEs). Appropriate preconditioning is vital for designing efficient iterative solvers of this type. This research consists of two parts. In the first part, we compare two different kinds of preconditioners for a conjugate gradient (CG) solver attacking one partial integro-differential equation (PIDE) in finance, both theoretically and numerically. An analysis on mesh independence and rate of convergence of the CG solver is included. The knowledge of preconditioning the PIDE is applied to a relevant optimization problem. The second part aims at developing a new preconditioning technique by embedding reduced order models of nonlinear PDEs, which are generated by proper orthogonal decomposition (POD), into deflated Krylov subspace algorithms in solving corresponding optimization problems. Numerical results are reported for a series of test problems.