### Refine

#### Year of publication

#### Document Type

- Doctoral Thesis (42)
- Habilitation (2)

#### Language

- English (44) (remove)

#### Keywords

- Optimierung (6)
- Funktionalanalysis (5)
- Partielle Differentialgleichung (5)
- Approximation (4)
- Numerische Strömungssimulation (4)
- Shape Optimization (4)
- Approximationstheorie (3)
- Funktionentheorie (3)
- Hadamard product (3)
- Kompositionsoperator (3)

#### Institute

- Mathematik (44) (remove)

The subject of this thesis is a homological approach to the splitting theory of PLS-spaces, i.e. to the question for which topologically exact short sequences 0->X->Y->Z->0 of PLS-spaces X,Y,Z the right-hand map admits a right inverse. We show that the category (PLS) of PLS-spaces and continuous linear maps is an additive category in which every morphism admits a kernel and a cokernel, i.e. it is pre-abelian. However, we also show that it is neither quasi-abelian nor semi-abelian. As a foundation for our homological constructions we show the more general result that every pre-abelian category admits a largest exact structure in the sense of Quillen. In the pre-abelian category (PLS) this exact structure consists precisely of the topologically exact short sequences of PLS-spaces. Using a construction of Ext-functors due to Yoneda, we show that one can define for each PLS-space A and every natural number k the k-th abelian-group valued covariant and contravariant Ext-functors acting on the category (PLS) of PLS-spaces, which induce for every topologically exact short sequence of PLS-spaces a long exact sequence of abelian groups and group morphisms. These functors are studied in detail and we establish a connection between the Ext-functors of PLS-spaces and the Ext-functors for LS-spaces. Through this connection we arrive at an analogue of a result for Fréchet spaces which connects the first derived functor of the projective limit with the first Ext-functor and also gives sufficient conditions for the vanishing of the higher Ext-functors. Finally, we show that Ext^k(E,F) = 0 for a k greater or equal than 1, whenever E is a closed subspace and F is a Hausdorff-quotient of the space of distributions, which generalizes a result of Wengenroth that is itself a generalization of results due to Domanski and Vogt.

The goal of this thesis is to transfer the logarithmic barrier approach, which led to very efficient interior-point methods for convex optimization problems in recent years, to convex semi-infinite programming problems. Based on a reformulation of the constraints into a nondifferentiable form this can be directly done for convex semi- infinite programming problems with nonempty compact sets of optimal solutions. But, by means of an involved max-term this reformulation leads to nondifferentiable barrier problems which can be solved with an extension of a bundle method of Kiwiel. This extension allows to deal with inexact objective values and subgradient information which occur due to the inexact evaluation of the maxima. Nevertheless we are able to prove similar convergence results as for the logarithmic barrier approach in the finite optimization. In the further course of the thesis the logarithmic barrier approach is coupled with the proximal point regularization technique in order to solve ill-posed convex semi-infinite programming problems too. Moreover this coupled algorithm generates sequences converging to an optimal solution of the given semi-infinite problem whereas the pure logarithmic barrier only produces sequences whose accumulation points are such optimal solutions. If there are certain additional conditions fulfilled we are further able to prove convergence rate results up to linear convergence of the iterates. Finally, besides hints for the implementation of the methods we present numerous numerical results for model examples as well as applications in finance and digital filter design.

A matrix A is called completely positive if there exists an entrywise nonnegative matrix B such that A = BB^T. These matrices can be used to obtain convex reformulations of for example nonconvex quadratic or combinatorial problems. One of the main problems with completely positive matrices is checking whether a given matrix is completely positive. This is known to be NP-hard in general. rnrnFor a given matrix completely positive matrix A, it is nontrivial to find a cp-factorization A=BB^T with nonnegative B since this factorization would provide a certificate for the matrix to be completely positive. But this factorization is not only important for the membership to the completely positive cone, it can also be used to recover the solution of the underlying quadratic or combinatorial problem.rnrnIn addition, it is not a priori known how many columns are necessary to generate a cp-factorization for the given matrix. The minimal possible number of columns is called the cp-rank of A and so far it is still an open question how to derive the cp-rank for a given matrix. Some facts on completely positive matrices and the cp-rank will be given in Chapter 2.rnrnMoreover, in Chapter 6, we will see a factorization algorithm, which, for a given completely positive matrix A and a suitable starting point, computes the nonnegative factorization A=BB^T. The algorithm therefore returns a certificate for the matrix to be completely positive. As introduced in Chapter 3, the fundamental idea of the factorization algorithm is to start from an initial square factorization which is not necessarily entrywise nonnegative, and extend this factorization to a matrix for which the number of columns is greater than or equal to the cp-rank of A. Then it is the goal to transform this generated factorization into a cp-factorization.rnrnThis problem can be formulated as a nonconvex feasibility problem, as shown in Section 4.1, and solved by a method which is based on alternating projections, as proven in Chapter 6.rnrnOn the topic of alternating projections, a survey will be given in Chapter 5. Here we will see how to apply this technique to several types of sets like subspaces, convex sets, manifolds and semialgebraic sets. Furthermore, we will see some known facts on the convergence rate for alternating projections between these types of sets. Considering more than two sets yields the so called cyclic projections approach. Here some known facts for subspaces and convex sets will be shown. Moreover, we will see a new convergence result on cyclic projections among a sequence of manifolds in Section 5.4.rnrnIn the context of cp-factorizations, a local convergence result for the introduced algorithm will be given. This result is based on the known convergence for alternating projections between semialgebraic sets.rnrnTo obtain cp-facrorizations with this first method, it is necessary to solve a second order cone problem in every projection step, which is very costly. Therefore, in Section 6.2, we will see an additional heuristic extension, which improves the numerical performance of the algorithm. Extensive numerical tests in Chapter 7 will show that the factorization method is very fast in most instances. In addition, we will see how to derive a certificate for the matrix to be an element of the interior of the completely positive cone.rnrnAs a further application, this method can be extended to find a symmetric nonnegative matrix factorization, where we consider an additional low-rank constraint. Here again, the method to derive factorizations for completely positive matrices can be used, albeit with some further adjustments, introduced in Section 8.1. Moreover, we will see that even for the general case of deriving a nonnegative matrix factorization for a given rectangular matrix A, the key aspects of the completely positive factorization approach can be used. To this end, it becomes necessary to extend the idea of finding a completely positive factorization such that it can be used for rectangular matrices. This yields an applicable algorithm for nonnegative matrix factorization in Section 8.2.rnNumerical results for this approach will suggest that the presented algorithms and techniques to obtain completely positive matrix factorizations can be extended to general nonnegative factorization problems.

This thesis is divided into three main parts: The description of the calibration problem, the numerical solution of this problem and the connection to optimal stochastic control problems. Fitting model prices to given market prices leads to an abstract least squares formulation as calibration problem. The corresponding option price can be computed by solving a stochastic differential equation via the Monte-Carlo method which seems to be preferred by most practitioners. Due to the fact that the Monte-Carlo method is expensive in terms of computational effort and requires memory, more sophisticated stochastic predictor-corrector schemes are established in this thesis. The numerical advantage of these predictor-corrector schemes ispresented and discussed. The adjoint method is applied to the calibration. The theoretical advantage of the adjoint method is discussed in detail. It is shown that the computational effort of gradient calculation via the adjoint method is independent of the number of calibration parameters. Numerical results confirm the theoretical results and summarize the computational advantage of the adjoint method. Furthermore, provides the connection to optimal stochastic control problems is proven in this thesis.rn

In the first part of this work we generalize a method of building optimal confidence bounds provided in Buehler (1957) by specializing an exhaustive class of confidence regions inspired by Sterne (1954). The resulting confidence regions, also called Buehlerizations, are valid in general models and depend on a designated statistic'' that can be chosen according to some desired monotonicity behaviour of the confidence region. For a fixed designated statistic, the thus obtained family of confidence regions indexed by their confidence level is nested. Buehlerizations have furthermore the optimality property of being the smallest (w.r.t. set inclusion) confidence regions that are increasing in their designated statistic. The theory is eventually applied to normal, binomial, and exponential samples. The second part deals with the statistical comparison of pairs of diagnostic tests and establishes relations 1. between the sets of lower confidence bounds, 2. between the sets of pairs of comparable lower confidence bounds, and 3. between the sets of admissible lower confidence bounds in various models for diverse parameters of interest.

One of the main tasks in mathematics is to answer the question whether an equation possesses a solution or not. In the 1940- Thom and Glaeser studied a new type of equations that are given by the composition of functions. They raised the following question: For which functions Î¨ does the equation F(Î¨)=f always have a solution. Of course this question only makes sense if the right hand side f satisfies some a priori conditions like being contained in the closure of the space of all compositions with Î¨ and is easy to answer if F and f are continuous functions. Considering further restrictions to these functions, especially to F, extremely complicates the search for an adequate solution. For smooth functions one can already find deep results by Bierstone and Milman which answer the question in the case of a real-analytic function Î¨. This work contains further results for a different class of functions, namely those Î¨ that are smooth and injective. In the case of a function Î¨ of a single real variable, the question can be fully answered and we give three conditions that are both sufficient and necessary in order for the composition equation to always have a solution. Furthermore one can unify these three conditions to show that they are equivalent to the fact that Î¨ has a locally Hölder-continuous inverse. For injective functions Î¨ of several real variables we give necessary conditions for the composition equation to be solvable. For instance Î¨ should satisfy some form of local distance estimate for the partial derivatives. Under the additional assumption of the Whitney-regularity of the image of Î¨, we can give sufficient conditions for flat functions f on the critical set of Î¨ to possess a solution F(Î¨)=f.

In this thesis we focus on the development and investigation of methods for the computation of confluent hypergeometric functions. We point out the relations between these functions and parabolic boundary value problems and demonstrate applications to models of heat transfer and fluid dynamics. For the computation of confluent hypergeometric functions on compact (real or complex) intervals we consider a series expansion based on the Hadamard product of power series. It turnes out that the partial sums of this expansion are easily computable and provide a better rate of convergence in comparison to the partial sums of the Taylor series. Regarding the computational accuracy the problem of cancellation errors is reduced considerably. Another important tool for the computation of confluent hypergeometric functions are recurrence formulae. Although easy to implement, such recurrence relations are numerically unstable e.g. due to rounding errors. In order to circumvent these problems a method for computing recurrence relations in backward direction is applied. Furthermore, asymptotic expansions for large arguments in modulus are considered. From the numerical point of view the determination of the number of terms used for the approximation is a crucial point. As an application we consider initial-boundary value problems with partial differential equations of parabolic type, where we use the method of eigenfunction expansion in order to determine an explicit form of the solution. In this case the arising eigenfunctions depend directly on the geometry of the considered domain. For certain domains with some special geometry the eigenfunctions are of confluent hypergeometric type. Both a conductive heat transfer model and an application in fluid dynamics is considered. Finally, the application of several heat transfer models to certain sterilization processes in food industry is discussed.

In this thesis, we investigate the quantization problem of Gaussian measures on Banach spaces by means of constructive methods. That is, for a random variable X and a natural number N, we are searching for those N elements in the underlying Banach space which give the best approximation to X in the average sense. We particularly focus on centered Gaussians on the space of continuous functions on [0,1] equipped with the supremum-norm, since in that case all known methods failed to achieve the optimal quantization rate for important Gauss-processes. In fact, by means of Spline-approximations and a scheme based on the Best-Approximations in the sense of the Kolmogorov n-width we were able to attain the optimal rate of convergence to zero for these quantization problems. Moreover, we established a new upper bound for the quantization error, which is based on a very simple criterion, the modulus of smoothness of the covariance function. Finally, we explicitly constructed those quantizers numerically.

This work investigates the industrial applicability of graphics and stream processors in the field of fluid simulations. For this purpose, an explicit Runge-Kutta discontinuous Galerkin method in arbitrarily high order is implemented completely for the hardware architecture of GPUs. The same functionality is simultaneously realized for CPUs and compared to GPUs. Explicit time steppings as well as established implicit methods are under consideration for the CPU. This work aims at the simulation of inviscid, transsonic flows over the ONERA M6 wing. The discontinuities which typically arise in hyperbolic equations are treated with an artificial viscosity approach. It is further investigated how this approach fits into the explicit time stepping and works together with the special architecture of the GPU. Since the treatment of artificial viscosity is close to the simulation of the Navier-Stokes equations, it is reviewed how GPU-accelerated methods could be applied for computing viscous flows. This work is based on a nodal discontinuous Galerkin approach for linear hyperbolic problems. Here, it is extended to non-linear problems, which makes the application of numerical quadrature obligatory. Moreover, the representation of complex geometries is realized using isoparametric mappings. Higher order methods are typically very sensitive with respect to boundaries which are not properly resolved. For this purpose, an approach is presented which fits straight-sided DG meshes to curved geometries which are described by NURBS surfaces. The mesh is modeled as an elastic body and deformed according to the solution of closest point problems in order to minimize the gap to the original spline surface. The sensitivity with respect to geometry representations is reviewed in the end of this work in the context of shape optimization. Here, the aerodynamic drag of the ONERA M6 wing is minimized according to the shape gradient which is implicitly smoothed within the mesh deformation approach. In this context a comparison to the classical Laplace-Beltrami operator is made in a Stokes flow situation.

We will consider discrete dynamical systems (X,T) which consist of a state space X and a linear operator T acting on X. Given a state x in X at time zero, its state at time n is determined by the n-th iteration T^n(x). We are interested in the long-term behaviour of this system, that means we want to know how the sequence (T^n (x))_(n in N) behaves for increasing n and x in X. In the first chapter, we will sum up the relevant definitions and results of linear dynamics. In particular, in topological dynamics the notions of hypercyclic, frequently hypercyclic and mixing operators will be presented. In the setting of measurable dynamics, the most important definitions will be those of weakly and strongly mixing operators. If U is an open set in the (extended) complex plane containing 0, we can define the Taylor shift operator on the space H(U) of functions f holomorphic in U as Tf(z) = (f(z)- f(0))/z if z is not equal to 0 and otherwise Tf(0) = f'(0). In the second chapter, we will start examining the Taylor shift on H(U) endowed with the topology of locally uniform convergence. Depending on the choice of U, we will study whether or not the Taylor shift is weakly or strongly mixing in the Gaussian sense. Next, we will consider Banach spaces of functions holomorphic on the unit disc D. The first section of this chapter will sum up the basic properties of Bergman and Hardy spaces in order to analyse the dynamical behaviour of the Taylor shift on these Banach spaces in the next part. In the third section, we study the space of Cauchy transforms of complex Borel measures on the unit circle first endowed with the quotient norm of the total variation and then with a weak-* topology. While the Taylor shift is not even hypercyclic in the first case, we show that it is mixing for the latter case. In Chapter 4, we will first introduce Bergman spaces A^p(U) for general open sets and provide approximation results which will be needed in the next chapter where we examine the Taylor shift on these spaces on its dynamical properties. In particular, for 1<=p<2 we will find sufficient conditions for the Taylor shift to be weakly mixing or strongly mixing in the Gaussian sense. For p>=2, we consider specific Cauchy transforms in order to determine open sets U such that the Taylor shift is mixing on A^p(U). In both sections, we will illustrate the results with appropriate examples. Finally, we apply our results to universal Taylor series. The results of Chapter 5 about the Taylor shift allow us to consider the behaviour of the partial sums of the Taylor expansion of functions in general Bergman spaces outside its disc of convergence.