This thesis consists of four highly related chapters examining China’s rise in the aluminium industry. The first chapter addresses the conditions that allowed China, which first entered the market in the 1950s, to rise to world leadership in aluminium production. Although China was a latecomer, its re-entry into the market after the oil crises in the 1970s was a success and led to its ascent as the world’s largest aluminium producer by 2001. With an estimated production of 40.4 million tonnes in 2022, China represented almost 60% of the global output. Chapter 1 examines the factors underlying this success, such as the decline of international aluminium cartels, the introduction of innovative technology, the US granting China the MFN tariff status, Chinese-specific factors, and supportive government policies. Chapter 2 develops a mathematical model to analyze firms’ decisions in the short term. It examines how an incumbent with outdated technology and a new entrant with access to a new type of technology make strategic decisions, including the incumbent’s decision whether to deter entry, the production choice of firms, the optimal technology adoption rate of the newcomer, and cartel formation. Chapter 3 focuses on the adoption of new technology by firms upon market entry in four scenarios: firstly, a free market Cournot competition; secondly, a situation in which the government determines technology adoption rates; thirdly, a scenario in which the government controls both technology and production; and finally, a scenario where the government dictates technology adoption rates, production levels, and also the number of market participants. Chapter 4 applies the Spencer and Brander (1983) framework to examine strategic industrial policy. The model assumes that there are two exporting firms in two different countries that sell a product to a third country. We examine how the domestic firm is influenced by government intervention, such as the provision of a fixed-cost subsidy to improve its competitiveness relative to the foreign company. Chapter 4 initially investigates a scenario where only one government offers a fixed-cost subsidy, followed by an analysis of the case when both governments simultaneously provide financial help. Taken together, these chapters provide a comprehensive analysis of the strategic, technological, and political factors contributing to China’s leadership in the global aluminium industry. Chapter 1: The Rise of China as a Latecomer in the Global Aluminium Industry This chapter examines China’s remarkable transformation into a global leader in the aluminium industry, a sector in which the country accounted for approximately 58.9% of worldwide production in 2022. We examine how China, a latecomer to the aluminium industry that started off with labor-intensive technology in 1953, grew into the largest aluminium producer with some of the most advanced smelters in the world. This analysis identifies and discusses several opportunities that Chinese aluminium producers took advantage of. The first set of opportunities happened during the 1970s oil crises, which softened international competition and allowed China to acquire innovative smelting technology from Japan. The second set of opportunities started at about the same time when China opened its economy in 1978. The substantial demand for aluminium in China is influenced by both external and internal factors. Externally, the US granted China’s MFN tariff status in 1980 and China entered the World Trade Organization (WTO) in 2001. Both events contributed to a surge in Chinese aluminium consumption. Internally, China’s investment-led growth model boosted further its aluminium demand. Additional factors specific to China, such as low labor costs and the abundance of coal as an energy source, offer Chinese firms competitive advantages against international players. Furthermore, another window of opportunity is due to Chinese governmental policies, including phasing out old technology, providing subsidies, and gradually opening the economy to enhance domestic competition before expanding globally. By describing these elements, the study provides insights into the dynamic interplay of external circumstances and internal strategies that contributed to the success of the Chinese aluminium industry. Chapter 2: Technological Change and Strategic Choices for Incumbent and New Entrant This chapter introduces an oligopoly model that includes two actors: an incumbent and a potential entrant, that compete in the same market. We assume that two participants are located in different parts of the market: the incumbent is situated in area 1, whereas the potential entrant may venture into the other region, area 2. The incumbent exists in stage zero, where it can decide whether to deter the newcomer’s entry. A new type of technology exists in period one, when the newcomer may enter the market. In the short term, the incumbent is trapped with the outdated technology, while the new entrant may choose to partially or completely adopt the latest technology. Our results suggest the following: Firstly, the incumbent only tries to deter the new entrant if a condition for entry cost is met. Secondly, the new entrant is only interested in forming a cartel with the incumbent if a function of the ratio of the variable to new technology’s fixed-cost parameters is sufficiently high. Thirdly, if the newcomer asks to form a cartel, the incumbent will always accept this request. Finally, we can obtain the optimal new technology adoption rate for the newcomer. Chapter 3: Technological Adoption and Welfare in Cournot Oligopoly This study examines the difference between the optimal technology adoption rates chosen by firms in a homogeneous Cournot oligopoly and that preferred by a benevolent government upon firms’ market entry. To address the question of whether the technology choices of firms and government are similar, we analyze several different scenarios, which differ in the extent of government intervention in the market. Our results suggest a relationship between the number of firms in the market and the impact of government intervention on technology adoption rates. Especially in situations with a low number of firms that are interested in entering the market, greater government influence tends to lead to higher technology adoption rates of firms. Conversely, in scenarios with a higher number of firms and a government that lacks control over the number of market players, the technology adoption rate of firms will be highest when the government plays no role. Chapter 4: International Technological Innovation and Industrial Strategies Supporting domestic firms when they first enter the market may be seen as a favorable policy choice by governments around the world thanks to their ability to enhance the competitive advantage of domestic firms in non-cooperative competition against foreign enterprises (infant industry protection argument). This advantage may allow domestic firms to increase their market share and generate higher profits, thereby improving domestic welfare. This chapter utilizes the Spencer and Brander (1983) framework as a theoretical foundation to elucidate the effects of fixed-cost subsidies on firms’ production levels, technological innovations, and social welfare. The analysis examines two firms in different countries, each producing a homogeneous product that is sold in a third, separate country. We first examine the Cournot-Nash equilibrium in the absence of government intervention, followed by analyzing a scenario where just one government provides a financial subsidy for its domestic firm, and finally, we consider a situation where both governments simultaneously provide financial assistance for their respective firms. Our results suggest that governments aim to maximize social welfare by providing fixed-cost subsidies to their respective firms, finding themselves in a Chicken game scenario. Regarding technology innovation, subsidies lead to an increased technological adoption rate for recipient firms, regardless of whether one or both firms in a market receive support, compared to the situation without subsidies. The technology adoption rate of the recipient firm is higher than of its rival when only the recipient firm benefits from the fixed-cost subsidy. The lowest technology adoption rate of a firm occurs when the firm does not receive a fixed-cost subsidy, but its competitor does. Furthermore, global welfare will benefit the most in case when both exporting countries grant fixed-cost subsidies, and this welfare level is higher when only one country subsidizes than when no subsidies are provided by any country.

Differential equations yield solutions that necessarily contain a certain amount of regularity and are based on local interactions. There are various natural phenomena that are not well described by local models. An important class of models that describe long-range interactions are the so-called nonlocal models, which are the subject of this work. The nonlocal operators considered here are integral operators with a finite range of interaction and the resulting models can be applied to anomalous diffusion, mechanics and multiscale problems. While the range of applications is vast, the applicability of nonlocal models can face problems such as the high computational and algorithmic complexity of fundamental tasks. One of them is the assembly of finite element discretizations of truncated, nonlocal operators. The first contribution of this thesis is therefore an openly accessible, documented Python code which allows to compute finite element approximations for nonlocal convection-diffusion problems with truncated interaction horizon. Another difficulty in the solution of nonlocal problems is that the discrete systems may be ill-conditioned which complicates the application of iterative solvers. Thus, the second contribution of this work is the construction and study of a domain decomposition type solver that is inspired by substructuring methods for differential equations. The numerical results are based on the abstract framework of nonlocal subdivisions which is introduced here and which can serve as a guideline for general nonlocal domain decomposition methods.

Sozialunternehmen haben mindestens zwei Ziele: die Erfüllung ihrer sozialen bzw. ökologischen Mission und finanzielle Ziele. Zwischen diesen Zielen können Spannungen entstehen. Wenn sie sich in diesem Spannungsfeld wiederholt zugunsten der finanziellen Ziele entscheiden, kommt es zum Mission Drift. Die Priorisierung der finanziellen Ziele überlagert dabei die soziale Mission. Auch wenn das Phänomen in der Praxis mehrfach beobachtet und in Einzelfallanalysen beschrieben wurde, gibt es bislang wenig Forschung zu Mission Drift. Der Fokus der vorliegenden Arbeit liegt darauf, diese Forschungslücke zu schließen und eigene Erkenntnisse für die Auslöser und Treiber des Mission Drifts von Sozialunternehmen zu ermitteln. Ein Augenmerk liegt auf den verhaltensökonomischen Theorien und der Mixed-Gamble-Logik. Dieser Logik zufolge liegt bei Entscheidungen immer eine Gleichzeitigkeit von Gewinnen und Verlusten vor, sodass Entscheidungsträger die Furcht vor Verlusten gegenüber der Aussicht auf Gewinne abwägen müssen. Das Modell wird genutzt, um eine neue theoretische Betrachtungsweise auf die Abwägung zwischen sozialen und finanziellen Zielen bzw. Mission Drift zu erhalten. Mit einem Conjoint Experiment werden Daten über das Entscheidungsverhalten von Sozialunternehmern generiert. Im Zentrum steht die Abwägung zwischen sozialen und finanziellen Zielen in verschiedenen Szenarien (Krisen- und Wachstumssituationen). Mithilfe einer eigens erstellten Stichprobe von 1.222 Sozialunternehmen aus Deutschland, Österreich und der Schweiz wurden 187 Teilnehmende für die Studie gewonnen. Die Ergebnisse dieser Arbeit zeigen, dass eine Krisensituation Auslöser für Mission Drift von Sozialunternehmen sein kann, weil in diesem Szenario den finanziellen Zielen die größte Bedeutung zugemessen wird. Für eine Wachstumssituation konnten hingegen keine solche Belege gefunden werden. Hinzu kommen weitere Einflussfaktoren, welche die finanzielle Orientierung verstärken können, nämlich die Gründeridentitäten der Sozialunternehmer, eine hohe Innovativität der Unternehmen und bestimmte Stakeholder. Die Arbeit schließt mit einer ausführlichen Diskussion der Ergebnisse. Es werden Empfehlungen gegeben, wie Sozialunternehmen ihren Zielen bestmöglich treu bleiben können. Außerdem werden die Limitationen der Studie und Wege für zukünftige Forschung im Bereich Mission Drift aufgezeigt.

Some of the largest firms in the DACH region (Germany, Austria, Switzerland) are (partially) owned by a foundation and/or a family office, such as Aldi, Bosch, or Rolex. Despite their growing importance, prior research neglected to analyze the impact of these intermediaries on the firms they own. This dissertation closes this research gap by contributing to a deeper understanding of two increasingly used family firm succession vehicles, through four empirical quantitative studies. The first study focuses on the heterogeneity in foundation-owned firms (FOFs) by applying a descriptive analysis to a sample of 169 German FOFs. The results indicate that the family as a central stakeholder in a family foundation fosters governance that promotes performance and growth. The second study examines the firm growth of 204 FOFs compared to matched non-FOFs from the DACH region. The findings suggest that FOFs grow significantly less in terms of sales but not with regard to employees. In addition, it seems that this negative effect is stronger for the upper than for the middle or lower quantiles of the growth distribution. Study three adopts an agency perspective and investigates the acquisition behavior within the group of 164 FOFs. The results reveal that firms with charitable foundations as owners are more likely to undertake acquisitions and acquire targets that are geographically and culturally more distant than firms with a family foundation as owner. At the same time, they favor target companies from the same or related industries. Finally, the fourth study scrutinizes the capital structure of firms owned by single family-offices (SFOs). Drawing on a hand-collected sample of 173 SFO-owned firms in the DACH region, the results show that SFO-owned firms display a higher long-term debt ratio than family-owned firms, indicating that SFO-owned firms follow trade-off theory, similar to private equity-owned firms. Additional analyses show that this effect is stronger for SFOs that sold their original family firm. In conclusion, the outcomes of this dissertation furnish valuable research contributions and offer practical insights for families navigating such intermediaries or succession vehicles in the long term.

Striving for sustainable development by combating climate change and creating a more social world is one of the most pressing issues of our time. Growing legal requirements and customer expectations require also Mittelstand firms to address sustainability issues such as climate change. This dissertation contributes to a better understanding of sustainability in the Mittelstand context by examining different Mittelstand actors and the three dimensions of sustainability - social, economic, and environmental sustainability - in four quantitative studies. The first two studies focus on the social relevance and economic performance of hidden champions, a niche market leading subgroup of Mittelstand firms. At the regional level, the impact of 1,645 hidden champions located in Germany on various dimensions of regional development is examined. A higher concentration of hidden champions has a positive effect on regional employment, median income, and patents. At the firm level, analyses of a panel dataset of 4,677 German manufacturing firms, including 617 hidden champions, show that the latter have a higher return on assets than other Mittelstand firms. The following two chapters deal with environmental strategies and thus contribute to the exploration of the environmental dimension of sustainability. First, the consideration of climate aspects in investment decisions is compared using survey data from 468 European venture capital and private equity investors. While private equity firms respond to external stakeholders and portfolio performance and pursue an active ownership strategy, venture capital firms are motivated by product differentiation and make impact investments. Finally, based on survey data from 443 medium-sized manufacturing firms in Germany, 54% of which are family-owned, the impact of stakeholder pressures on their decarbonization strategies is analyzed. A distinction is made between symbolic (compensation of CO₂-emissions) and substantive decarbonization strategies (reduction of CO₂-emissions). Stakeholder pressures lead to a proactive pursuit of decarbonization strategies, with internal and external stakeholders varying in their influence on symbolic and substantial decarbonization strategies, and the relationship influenced by family ownership.

This thesis comprises of four research papers on the economics of education and industrial relations, which contribute to the field of empirical economic research. All of the corresponding papers focus on analysing how much time individuals spend on specific activities. The allocation of available time resources is a decision that individuals make throughout their lifetime. In this thesis, we consider individuals at different stages of their lives - students at school, university students, and dependent employees at the workplace. Part I includes two research studies on student's behaviour in secondary and tertiary education. Chapter 2 explores whether students who are relatively younger or older within the school year exhibit differential time allocation. Building on previous findings showing that relatively younger students perform worse in school, the study shows that relatively younger students are aware of their poor performance in school and feel more strain as a result. Nevertheless, there are no clear differences to be found in terms of time spent on homework, while relatively younger students spend more time watching television and less time on sports activities. Thus, the results suggest that the lower learning outcomes are not associated with different time allocations between school-related activities and non-school-related activities. Chapter 3 analyses how individual ability and labour market prospects affect study behaviour. The theoretical modelling predicts that both determinants increase study effort. The empirical investigation is based on cross-sectional data from the National Educational Panel Study (NEPS) and includes thousands of students in Germany. The analyses show that more gifted students exhibit lower subjective effort levels and invest less time in self-study. In contrast, very good labour market prospects lead to more effort exerted by the student, both qualitatively and quantitatively. The potential endogeneity problem is taken into account by using regional unemployment data as an instrumental variable. Part II includes two labour economic studies on determinants of overtime. Both studies belong to the field of industrial relations, as they focus on union membership on the one hand and the interplay of works councils and collective bargaining coverage on the other. Chapter 4 shows that union members work less overtime than non-members do. The econometric approach takes the problem of unobserved heterogeneity into account; but provides no evidence that this issue affects the results. Different channels that could lead to this relationship are analysed by examining relevant subgroups separately. For example, this effect of union membership can also be observed in establishments with works councils and for workers who are very likely to be covered by collective bargaining agreements. The study concludes that the observed effect is due to the fact that union membership can protect workers from corresponding increased working time demands by employers. Chapter 5 builds on previous studies showing a negative effect of works councils on overtime. In addition to co-determination by works councils at the firm level, collective bargaining coverage is an important factor in the German industrial relations system. Corresponding data was not available in the SOEP for quite some time. Therefore, the study uses recent SOEP data, which also contains information on collective bargaining coverage. A cross-sectional analysis is conducted to examine the effects of works councils in establishments with and without collective bargaining coverage. Similar to studies analysing other outcome variables, the results show that the effect of works councils exists only for employees covered by a collective bargaining agreement.

Even though proper research on Cauchy transforms has been done, there are still a lot of open questions. For example, in the case of representation theorems, i.e. the question when a function can be represented as a Cauchy transform, there is 'still no completely satisfactory answer' ([9], p. 84). There are characterizations for measures on the circle as presented in the monograph [7] and for general compactly supported measures on the complex plane as presented in [27]. However, there seems to exist no systematic treatise of the Cauchy transform as an operator on $L_p$ spaces and weighted $L_p$ spaces on the real axis. This is the point where this thesis draws on and we are interested in developing several characterizations for the representability of a function by Cauchy transforms of $L_p$ functions. Moreover, we will attack the issue of integrability of Cauchy transforms of functions and measures, a topic which is only partly explored (see [43]). We will develop different approaches involving Fourier transforms and potential theory and investigate into sufficient conditions and characterizations. For our purposes, we shall need some notation and the concept of Hardy spaces which will be part of the preliminary Chapter 1. Moreover, we introduce Fourier transforms and their complex analogue, namely Fourier-Laplace transforms. This will be of extraordinary usage due to the close connection of Cauchy and Fourier(-Laplace) transforms. In the second chapter we shall begin our research with a discussion of the Cauchy transformation on the classical (unweighted) $L_p$ spaces. Therefore, we start with the boundary behavior of Cauchy transforms including an adapted version of the Sokhotski-Plemelj formula. This result will turn out helpful for the determination of the image of the Cauchy transformation under $L_p(\R)$ for $p\in(1,\infty).$ The cases $p=1$ and $p=\infty$ are playing special roles here which justifies a treatise in separate sections. For $p=1$ we will involve the real Hardy space $H_{1}(\R)$ whereas the case $p=\infty$ shall be attacked by an approach incorporating intersections of Hardy spaces and certain subspaces of $L_{\infty}(\R).$ The third chapter prepares ourselves for the study of the Cauchy transformation on subspaces of $L_{p}(\R).$ We shall give a short overview of the basic facts about Cauchy transforms of measures and then proceed to Cauchy transforms of functions with support in a closed set $X\subset\R.$ Our goal is to build up the main theory on which we can fall back in the subsequent chapters. The fourth chapter deals with Cauchy transforms of functions and measures supported by an unbounded interval which is not the entire real axis. For convenience we restrict ourselves to the interval $[0,\infty).$ Bringing once again the Fourier-Laplace transform into play, we deduce complex characterizations for the Cauchy transforms of functions in $L_{2}(0,\infty).$ Moreover, we analyze the behavior of Cauchy transform on several half-planes and shall use these results for a fairly general geometric characterization. In the second section of this chapter, we focus on Cauchy transforms of measures with support in $[0,\infty).$ In this context, we shall derive a reconstruction formula for these Cauchy transforms holding under pretty general conditions as well as results on the behaviur on the left half-plane. We close this chapter by rather technical real-type conditions and characterizations for Cauchy transforms of functions in $L_p(0,\infty)$ basing on an approach in [82]. The most common case of Cauchy transforms, those of compactly supported functions or measures, is the subject of Chapter 5. After complex and geometric characterizations originating from similar ideas as in the fourth chapter, we adapt a functional-analytic approach in [27] to special measures, namely those with densities to a given complex measure $\mu.$ The chapter is closed with a study of the Cauchy transformation on weighted $L_p$ spaces. Here, we choose an ansatz through the finite Hilbert transform on $(-1,1).$ The sixth chapter is devoted to the issue of integrability of Cauchy transforms. Since this topic has no comprehensive treatise in literature yet, we start with an introduction of weighted Bergman spaces and general results on the interaction of the Cauchy transformation in these spaces. Afterwards, we combine the theory of Zen spaces with Cauchy transforms by using once again their connection with Fourier transforms. Here, we shall encounter general Paley-Wiener theorems of the recent past. Lastly, we attack the issue of integrability of Cauchy transforms by means of potential theory. Therefore, we derive a Fourier integral formula for the logarithmic energy in one and multiple dimensions and give applications to Fourier and hence Cauchy transforms. Two appendices are annexed to this thesis. The first one covers important definitions and results from measure theory with a special focus on complex measures. The second appendix contains Cauchy transforms of frequently used measures and functions with detailed calculations.

Traditional workflow management systems support process participants in fulfilling business tasks through guidance along a predefined workflow model. Flexibility has gained a lot of attention in recent decades through a shift from mass production to customization. Various approaches to workflow flexibility exist that either require extensive knowledge acquisition and modelling effort or an active intervention during execution and re-modelling of deviating behaviour. The pursuit of flexibility by deviation is to compensate both of these disadvantages through allowing alternative unforeseen execution paths at run time without demanding the process participant to adapt the workflow model. However, the implementation of this approach has been little researched so far. This work proposes a novel approach to flexibility by deviation. The approach aims at supporting process participants during the execution of a workflow through suggesting work items based on predefined strategies or experiential knowledge even in case of deviations. The developed concepts combine two renowned methods from the field of artificial intelligence - constraint satisfaction problem solving with process-oriented case-based reasoning. This mainly consists of a constraint-based workflow engine in combination with a case-based deviation management. The declarative representation of workflows through constraints allows for implicit flexibility and a simple possibility to restore consistency in case of deviations. Furthermore, the combined model, integrating procedural with declarative structures through a transformation function, increases the capabilities for flexibility. For an adequate handling of deviations the methodology of case-based reasoning fits perfectly, through its approach that similar problems have similar solutions. Thus, previous made experiences are transferred to currently regarded problems, under the assumption that a similar deviation has been handled successfully in the past. Necessary foundations from the field of workflow management with a focus on flexibility are presented first. As formal foundation, a constraint-based workflow model was developed that allows for a declarative specification of foremost sequential dependencies of tasks. Procedural and declarative models can be combined in the approach, as a transformation function was specified that converts procedural workflow models to declarative constraints. One main component of the approach is the constraint-based workflow engine that utilizes this declarative model as input for a constraint solving algorithm. This algorithm computes the worklist, which is proposed to the process participant during workflow execution. With predefined deviation handling strategies that determine how the constraint model is modified in order to restore consistency, the support is continuous even in case of deviations. The second major component of the proposed approach constitutes the case-based deviation management, which aims at improving the support of process participants on the basis of experiential knowledge. For the retrieve phase, a sophisticated similarity measure was developed that integrates specific characteristics of deviating workflows and combines several sequence similarity measures. Two alternative methods for the reuse phase were developed, a null adaptation and a generative adaptation. The null adaptation simply proposes tasks from the most similar workflow as work items, whereas the generative adaptation modifies the constraint-based workflow model based on the most similar workflow in order to re-enable the constraint-based workflow engine to suggest work items. The experimental evaluation of the approach consisted of a simulation of several types of process participants in the exemplary domain of deficiency management in construction. The results showed high utility values and a promising potential for an investigation of the transfer on other domains and the applicability in practice, which is part of future work. Concluding, the contributions are summarized and research perspectives are pointed out.

Survey data can be viewed as incomplete or partially missing from a variety of perspectives and there are different ways of dealing with this kind of data in the prediction and the estimation of economic quantities. In this thesis, we present two selected research contexts in which the prediction or estimation of economic quantities is examined under incomplete survey data. These contexts are first the investigation of composite estimators in the German Microcensus (Chapters 3 and 4) and second extensions of multivariate Fay-Herriot (MFH) models (Chapters 5 and 6), which are applied to small area problems. Composite estimators are estimation methods that take into account the sample overlap in rotating panel surveys such as the German Microcensus in order to stabilise the estimation of the statistics of interest (e.g. employment statistics). Due to the partial sample overlaps, information from previous samples is only available for some of the respondents, so the data are partially missing. MFH models are model-based estimation methods that work with aggregated survey data in order to obtain more precise estimation results for small area problems compared to classical estimation methods. In these models, several variables of interest are modelled simultaneously. The survey estimates of these variables, which are used as input in the MFH models, are often partially missing. If the domains of interest are not explicitly accounted for in a sampling design, the sizes of the samples allocated to them can, by chance, be small. As a result, it can happen that either no estimates can be calculated at all or that the estimated values are not published by statistical offices because their variances are too large.

This thesis focuses on the issues in price measurement and consists of three chapters. Due to outdated weighting information, a Laspeyres-based consumer price index (CPI) is prone to accumulating upward bias. Therefore, chapter 1 introduces and examines simple and transparent revision approaches that retrospectively address the source of the bias. They provide a consistent long-run time series of the CPI and require no additional information. Furthermore, a coherent decomposition of the bias into the contributions of individual product groups is developed. In a case study, the approaches are applied to a Laspeyres-based CPI. The empirical results confirm the theoretical predictions. The proposed revision approaches are adoptable not only to most national CPIs but also to other price-level measures such as the producer price index or the import and export price indices. Chapter 2 is dedicated to the measurement of import and export price indices. Such indices are complicated by the impact of exchange rates. These indices are usually also compiled by some Laspeyres type index. Therefore, substitution bias is an issue. The terms of trade (ratio of export and import price index) are therefore also likely to be distorted. The underlying substitution bias accumulates over time. The present article applies a simple and transparent retroactive correction approach that addresses the source of the substitution bias and produces meaningful long-run time series of import and export price levels and, therefore, of the terms of trade. Furthermore, an empirical case study is conducted that demonstrates the efficacy and versatility of the correction approach. Chapter 3 leaves the field of index revision and studies another issue in price measurement, namely, the economic evaluation of digital products in monetary terms that have zero market prices. This chapter explores different methods of economic valuation and pricing of free digital products and proposes an alternative way to calculate the economic value and a shadow price of free digital products: the Usage Cost Model (UCM). The goal of the chapter is, first of all, to formulate a theoretical framework and incorporate an alternative measure of the value of free digital products. However, an empirical application is also made to show the work of the theoretical model. Some conclusions on applicability are drawn at the end of the chapter.

Let K be a compact subset of the complex plane. Then the family of polynomials P is dense in A(K), the space of all continuous functions on K that are holomorphic on the interior of K, endowed with the uniform norm, if and only if the complement of K is connected. This is the statement of Mergelyan's celebrated theorem. There are, however, situations where not all polynomials are required to approximate every f ϵ A(K) but where there are strict subspaces of P that are still dense in A(K). If, for example, K is a singleton, then the subspace of all constant polynomials is dense in A(K). On the other hand, if 0 is an interior point of K, then no strict subspace of P can be dense in A(K). In between these extreme cases, the situation is much more complicated. It turns out that it is mostly determined by the geometry of K and its location in the complex plane which subspaces of P are dense in A(K). In Chapter 1, we give an overview of the known results. Our first main theorem, which we will give in Chapter 3, deals with the case where the origin is not an interior point of K. We will show that if K is a compact set with connected complement and if 0 is not an interior point of K, then any subspace Q ⊂ P which contains the constant functions and all but finitely many monomials is dense in A(K). There is a close connection between lacunary approximation and the theory of universality. At the end of Chapter 3, we will illustrate this connection by applying the above result to prove the existence of certain universal power series. To be specific, if K is a compact set with connected complement, if 0 is a boundary point of K and if A_0(K) denotes the subspace of A(K) of those functions that satisfy f(0) = 0, then there exists an A_0(K)-universal formal power series s, where A_0(K)-universal means that the family of partial sums of s forms a dense subset of A_0(K). In addition, we will show that no formal power series is simultaneously universal for all such K. The condition on the subspace Q in the main result of Chapter 3 is quite restrictive, but this should not be too surprising: The result applies to the largest possible class of compact sets. In Chapter 4, we impose a further restriction on the compact sets under consideration, and this will allow us to weaken the condition on the subspace Q. The result that we are going to give is similar to one of those presented in the first chapter, namely the one due to Anderson. In his article “Müntz-Szasz type approximation and the angular growth of lacunary integral functions”, he gives a criterion for a subspace Q of P to be dense in A(K) where K is entirely contained in some closed sector with vertex at the origin. We will consider compact sets with connected complement that are -- with the possible exception of the origin -- entirely contained in some open sector with vertex at the origin. What we are going to show is that if K\{0} is contained in an open sector of opening angle 2α and if Λ is some subset of the nonnegative integers, then the span of {z → z^λ : λ ϵ Λ} is dense in A(K) whenever 0 ϵ Λ and some Müntz-type condition is satisfied. Conversely, we will show that if a similar condition is not satisfied, then we can always find a compact set K with connected complement such that K\{0} is contained in some open sector of opening angle 2α and such that the span of {z → z^λ : λ ϵ Λ} fails to be dense in A(K).

In common shape optimization routines, deformations of the computational mesh usually suffer from decrease of mesh quality or even destruction of the mesh. To mitigate this, we propose a theoretical framework using so-called pre-shape spaces. This gives an opportunity for a unified theory of shape optimization, and of problems related to parameterization and mesh quality. With this, we stay in the free-form approach of shape optimization, in contrast to parameterized approaches that limit possible shapes. The concept of pre-shape derivatives is defined, and according structure and calculus theorems are derived, which generalize classical shape optimization and its calculus. Tangential and normal directions are featured in pre-shape derivatives, in contrast to classical shape derivatives featuring only normal directions on shapes. Techniques from classical shape optimization and calculus are shown to carry over to this framework, and are collected in generality for future reference. A pre-shape parameterization tracking problem class for mesh quality is in- troduced, which is solvable by use of pre-shape derivatives. This class allows for non-uniform user prescribed adaptations of the shape and hold-all domain meshes. It acts as a regularizer for classical shape objectives. Existence of regularized solu- tions is guaranteed, and corresponding optimal pre-shapes are shown to correspond to optimal shapes of the original problem, which additionally achieve the user pre- scribed parameterization. We present shape gradient system modifications, which allow simultaneous nu- merical shape optimization with mesh quality improvement. Further, consistency of modified pre-shape gradient systems is established. The computational burden of our approach is limited, since additional solution of possibly larger (non-)linear systems for regularized shape gradients is not necessary. We implement and com- pare these pre-shape gradient regularization approaches for a 2D problem, which is prone to mesh degeneration. As our approach does not depend on the choice of forms to represent shape gradients, we employ and compare weak linear elasticity and weak quasilinear p-Laplacian pre-shape gradient representations. We also introduce a Quasi-Newton-ADM inspired algorithm for mesh quality, which guarantees sufficient adaption of meshes to user specification during the rou- tines. It is applicable in addition to simultaneous mesh regularization techniques. Unrelated to mesh regularization techniques, we consider shape optimization problems constrained by elliptic variational inequalities of the first kind, so-called obstacle-type problems. In general, standard necessary optimality conditions cannot be formulated in a straightforward manner for such semi-smooth shape optimization problems. Under appropriate assumptions, we prove existence and convergence of adjoints for smooth regularizations of the VI-constraint. Moreover, we derive shape derivatives for the regularized problem and prove convergence to a limit object. Based on this analysis, an efficient optimization algorithm is devised and tested numerically. All previous pre-shape regularization techniques are applied to a variational inequality constrained shape optimization problem, where we also create customized targets for increased mesh adaptation of changing embedded shapes and active set boundaries of the constraining variational inequality.

Zeitgleich mit stetig wachsenden gesellschaftlichen Herausforderungen haben im vergangenen Jahrzehnt Sozialunternehmen stark an Bedeutung gewonnen. Sozialunternehmen verfolgen das Ziel, mit unternehmerischen Mitteln gesellschaftliche Probleme zu lösen. Da der Fokus von Sozialunternehmen nicht hauptsächlich auf der eigenen Gewinnmaximierung liegt, haben sie oftmals Probleme, geeignete Unternehmensfinanzierungen zu erhalten und Wachstumspotenziale zu verwirklichen. Zur Erlangung eines tiefergehenden Verständnisses des Phänomens der Sozialunternehmen untersucht der erste Teil dieser Dissertation anhand von zwei Studien auf der Basis eines Experiments das Entscheidungsverhalten der Investoren von Sozialunternehmen. Kapitel 2 betrachtet daher das Entscheidungsverhalten von Impact-Investoren. Der von diesen Investoren verfolgte Investmentansatz „Impact Investing“ geht über eine reine Orientierung an Renditen hinaus. Anhand eines Experiments mit 179 Impact Investoren, die insgesamt 4.296 Investitionsentscheidungen getroffen haben, identifiziert eine Conjoint-Studie deren wichtigste Entscheidungskriterien bei der Auswahl der Sozialunternehmen. Kapitel 3 analysiert mit dem Fokus auf sozialen Inkubatoren eine weitere spezifische Gruppe von Unterstützern von Sozialunternehmen. Dieses Kapitel veranschaulicht auf der Basis des Experiments die Motive und Entscheidungskriterien der Inkubatoren bei der Auswahl von Sozialunternehmen sowie die von ihnen angebotenen Formen der nichtfinanziellen Unterstützung. Die Ergebnisse zeigen unter anderem, dass die Motive von sozialen Inkubatoren bei der Unterstützung von Sozialunternehmen unter anderem gesellschaftlicher, finanzieller oder reputationsbezogener Natur sind. Der zweite Teil erörtert auf der Basis von zwei quantitativ empirischen Studien, inwiefern die Registrierung von Markenrechten sich zur Messung sozialer Innovationen eignet und mit finanziellem und sozialem Wachstum von sozialen Startups in Verbindung steht. Kapitel 4 erörtert, inwiefern Markenregistrierungen zur Messung von sozialen Innovationen dienen können. Basierend auf einer Textanalyse der Webseiten von 925 Sozialunternehmen (> 35.000 Unterseiten) werden in einem ersten Schritt vier Dimensionen sozialer Innovationen (Innovations-, Impact-, Finanz- und Skalierbarkeitsdimension) ermittelt. Darauf aufbauend betrachtet dieses Kapitel, wie verschiedene Markencharakteristiken mit den Dimensionen sozialer Innovationen zusammenhängen. Die Ergebnisse zeigen, dass insbesondere die Anzahl an registrierten Marken als Indikator für soziale Innovationen (alle Dimensionen) dient. Weiterhin spielt die geografische Reichweite der registrierten Marken eine wichtige Rolle. Aufbauend auf den Ergebnissen von Kapitel 4 untersucht Kapitel 5 den Einfluss von Markenregistrierungen in frühen Unternehmensphasen auf die weitere Entwicklung der hybriden Ergebnisse von sozialen Startups. Im Detail argumentiert Kapitel 5, dass sowohl die Registrierung von Marken an sich als auch deren verschiedene Charakteristiken unterschiedlich mit den sozialen und ökonomischen Ergebnissen von sozialen Startups in Verbindung stehen. Anhand eines Datensatzes von 485 Sozialunternehmen zeigen die Analysen aus Kapitel 5, dass soziale Startups mit einer registrierten Marke ein vergleichsweise höheres Mitarbeiterwachstum aufweisen und einen größeren gesellschaftlichen Beitrag leisten. Die Ergebnisse dieser Dissertation weiten die Forschung im Social Entrepreneurship-Bereich weiter aus und bieten zahlreiche Implikationen für die Praxis. Während Kapitel 2 und 3 das Verständnis über die Eigenschaften von nichtfinanziellen und finanziellen Unterstützungsorganisationen von Sozialunternehmen vergrößern, schaffen Kapitel 4 und 5 ein größeres Verständnis über die Bedeutung von Markenanmeldungen für Sozialunternehmen.

Die Nutzung von Cloud-Software und skalierten Web-Apps sowie Web-Services hat in den letzten Jahren extrem zugenommen, was zu einem Anstieg der Hochleistungs-Cloud-Rechenzentren führt. Neben der Verbesserung der Dienste spiegelt sich dies auch im weltweiten Stromverbrauch von Rechenzentren wider, der derzeit etwas mehr als 1% (entspricht etwa 200 TWh) beträgt. Prognosen sagen für die kommenden Jahre einen massiven Anstieg des Stromverbrauchs von Cloud-Rechenzentren voraus. Grundlage dieser Bewegung ist die Beschleunigung von Administration und Entwicklung, die unter anderem durch den Einsatz von Containern entsteht. Als Basis für Millionen von Web-Apps und -Services beschleunigen sie die Skalierung, Bereitstellung und Aktualisierung von Cloud-Diensten. In dieser Arbeit wird aufgezeigt, dass Container zusätzlich zu ihren vielen technischen Vorteilen Möglichkeiten zur Reduzierung des Energieverbrauchs von Cloud-Rechenzentren bieten, die aus einer ineffizienten Konfiguration von Containern sowie Container-Laufzeitumgebungen resultieren. Basierend auf einer Umfrage und einer Auswertung geeigneter Literatur werden in einem ersten Schritt wahrscheinliche Probleme beim Einsatz von Containern aufgedeckt. Weiterhin wird die Sensibilität von Administratoren und Entwicklern bezüglich des Energieverbrauchs von Container-Software ermittelt. Aufbauend auf den Ergebnissen der Umfrage und der Auswertung werden anhand von Standardszenarien im Containerumfeld die Komponenten des de facto Standards Docker untersucht. Anschließend wird ein Modell, bestehend aus Messmethodik, Empfehlungen für eine effiziente Konfiguration von Containern und Tools, beschrieben. Die Messmethodik sollte einfach anwendbar sein und gängige Technologien in Rechenzentren unterstützen. Darüber hinaus geben die Handlungsempfehlungen sowohl Entwicklern als auch Administratoren die Möglichkeit zu entscheiden, welche Komponenten von Docker im Sinne eines energieeffizienten Einsatzes und in Abhängigkeit vom Einsatzszenario der Container genutzt werden sollten und welche weggelassen werden könnten. Die resultierenden Container können im Sinne der Energieeffizienz auf Servern und gleichermaßen auf PCs und Embedded Systems (als Teil von IoT und Edge Cloud) eingesetzt werden und somit nicht nur dem zuvor beschriebenen Problem in der Cloud entgegenwirken. Die Arbeit beschäftigt sich zudem mit dem Verhalten von skalierten Webanwendungen. Gängige Orchestrierungswerkzeuge definieren statische Skalierungspunkte für Anwendungen, die in den meisten Fällen auf der CPU-Auslastung basieren. Es wird dargestellt, dass dabei weder die tatsächliche Erreichbarkeit noch der Stromverbrauch der Anwendungen berücksichtigt werden. Es wird der Autoscaler des Open-Source-Container-Orchestrierungswerkzeugs Kubernetes betrachtet, der um ein neu entwickeltes Werkzeug erweitert wird. Es wird deutlich, dass eine dynamische Anpassung der Skalierungspunkte durch eine Vorabauswertung gängiger Nutzungsszenarien sowie Informationen über deren Stromverbrauch und die Erreichbarkeit bei steigender Last erreicht werden kann. Schließlich folgt eine empirische Untersuchung des generierten Modells in Form von drei Simulationen, die die Auswirkungen auf den Energieverbrauch von Cloud-Rechenzentren darlegen sollen.

Surveys play a major role in studying social and behavioral phenomena that are difficult to observe. Survey data provide insights into the determinants and consequences of human behavior and social interactions. Many domains rely on high quality survey data for decision making and policy implementation including politics, health, business, and the social sciences. Given a certain research question in a specific context, finding the most appropriate survey design to ensure data quality and keep fieldwork costs low at the same time is a difficult task. The aim of examining survey research methodology is to provide the best evidence to estimate the costs and errors of different survey design options. The goal of this thesis is to support and optimize the accumulation and sustainable use of evidence in survey methodology in four steps: (1) Identifying the gaps in meta-analytic evidence in survey methodology by a systematic review of the existing evidence along the dimensions of a central framework in the field (2) Filling in these gaps with two meta-analyses in the field of survey methodology, one on response rates in psychological online surveys, the other on panel conditioning effects for sensitive items (3) Assessing the robustness and sufficiency of the results of the two meta-analyses (4) Proposing a publication format for the accumulation and dissemination of metaanalytic evidence

In vielen Branchen und vor allem in großen Unternehmen gehört eine Unterstützung von Geschäftsprozessen durch Workflow-Management-Systeme zum gelebten Alltag. Im Zentrum steht dabei die Steuerung kontrollflussorientierter Abläufe, während Prozesse mit einem Schwerpunkt auf Daten, Informationen und Wissen meist außen vor bleiben. Solche wissensintensive Prozesse (engl.: knowledge intensive processes) (KiPs) sind Untersuchungsgegenstand in vielen aktuellen Studien, welche ein derzeit aktives Forschungsgebiet formen. Im Vordergrund solcher KiPs steht dabei das durch die mitwirkenden Personen eingebrachte Wissen, welches in einem wesentlichen Maß die Prozessausführung beeinflusst, hierdurch jedoch die Bearbeitung komplexer und meist hoch volatiler Prozesse ermöglicht. Hierbei handelt es sich zumeist um entscheidungsintensive Prozesse, Prozesse zur Wissensakquisition oder Prozesse, die zu einer Vielzahl unterschiedlicher Prozessabläufe führen können. Im Rahmen dieser Arbeit wird ein Ansatz entwickelt und vorgestellt, der sich der Modellierung, Visualisierung und Ausführung wissensintensiver Prozesse unter Verwendung Semantischer Technologien widmet. Hierzu werden als die zentralen Anforderungen zur Ausführung von KiPs Flexibilität, Adaptivität und Zielorientierung definiert. Daran anknüpfend werden drei zentrale Grundprinzipien der Prozessmodellierung identifiziert, welche in der ersten Forschungsfrage aufgegriffen werden: „Können die drei Grundprinzipien in einem einheitlichen datenzentrierten, deklarativen, semantischen Ansatz (welcher mit ODD-BP bezeichnet wird) kombiniert werden und können damit die zentralen Anforderungen von KiPs erfüllt werden?” Die Grundlage für ODD-BP bildet ein Metamodell, welches als Sprachkonstrukt fungiert und die Definition der angestrebten Prozessmodelle erlaubt. Darauf aufbauend wird mit Hilfe von Inferenzierungsregeln ein Verfahren entwickelt, welches das Schlussfolgern von Prozesszuständen ermöglicht und somit eine klassische Workflow-Engine überflüssig macht. Zudem wird eine Methodik eingeführt, die für jede in einem Prozess mitwirkende Person eine maßgeschneiderte, adaptive Prozessvisualisierung ermöglicht, um neben dem Freiheitsgrad der Flexibilität auch eine fundierte Prozessunterstützung bei der Ausführung von KiPs leisten zu können. All dies erfolgt innerhalb einer einheitlichen Wissensbasis, die zum einen die Grundlage für eine vollständige semantische Prozessmodellierung bildet und zum anderen die Möglichkeit zur Integration von Expertenwissen eröffnet. Dieses Expertenwissen kann einen expliziten Beitrag bei der Ausführung wissensintensiver Prozesse leisten und somit die Kollaboration von Mensch und Maschine durch Technologien der symbolischen KI ermöglichen. Die zweite Forschungsfrage greift diesen Aspekt auf: „Kann in dem ODD-BP Ansatz ontologisches Wissen so integriert werden, dass dieses in einer Prozessausführung einen Beitrag leistet?” Das Metamodell sowie die entwickelten Methoden und Verfahren werden in einem prototypischen, generischen System realisiert, welches grundsätzlich für alle Anwendungsgebiete mit KiPs geeignet ist. Zur Validierung des ODD-BP Ansatzes erfolgt eine Ausrichtung auf den Anwendungsfall einer Notrufabfrage aus dem Leitstellenumfeld. Im Zuge der Evaluation wird gezeigt, wie dieser wissensintensive Ablauf von einer flexiblen, adaptiven und zielorientierten Prozessausführung profitiert. Darüber hinaus wird medizinisches Expertenwissen in den Prozessablauf integriert und es wird nachgewiesen, wie dieses zu verbesserten Prozessergebnissen beiträgt. Wissensintensive Prozesse stellen Unternehmen und Organisationen in allen Branchen und Anwendungsfällen derzeit vor große Herausforderungen und die Wissenschaft und Forschung widmet sich der Suche nach praxistauglichen Lösungen. Diese Arbeit präsentiert mit ODD-BP einen vielversprechenden Ansatz, indem die Möglichkeiten Semantischer Technologien dazu genutzt werden, eine eng verzahnte Zusammenarbeit zwischen Mensch und Maschine bei der Ausführung von KiPs zu ermöglichen. Die zur Evaluation fokussierte Notrufabfrage innerhalb von Leitstellen stellt zudem einen höchst relevanten Anwendungsfall dar, da in einem akuten Notfall in kürzester Zeit Entscheidungen getroffen werden müssen, um weitreichenden Schaden abwenden und Leben retten zu können. Durch die Berücksichtigung umfassender Datenmengen und das Ausnutzen verfügbaren Expertenwissens kann so eine schnelle Lagebewertung mit Hilfe der maschinellen Unterstützung erreicht und der Mensch beim Treffen von richtigen Entscheidungen unterstützt werden.

Estimation and therefore prediction -- both in traditional statistics and machine learning -- encounters often problems when done on survey data, i.e. on data gathered from a random subset of a finite population. Additional to the stochastic generation of the data in the finite population (based on a superpopulation model), the subsetting represents a second randomization process, and adds further noise to the estimation. The character and impact of the additional noise on the estimation procedure depends on the specific probability law for subsetting, i.e. the survey design. Especially when the design is complex or the population data is not generated by a Gaussian distribution, established methods must be re-thought. Both phenomena can be found in business surveys, and their combined occurrence poses challenges to the estimation. This work introduces selected topics linked to relevant use cases of business surveys and discusses the role of survey design therein: First, consider micro-econometrics using business surveys. Regression analysis under the peculiarities of non-normal data and complex survey design is discussed. The focus lies on mixed models, which are able to capture unobserved heterogeneity e.g. between economic sectors, when the dependent variable is not conditionally normally distributed. An algorithm for survey-weighted model estimation in this setting is provided and applied to business data. Second, in official statistics, the classical sampling randomization and estimators for finite population totals are relevant. The variance estimation of estimators for (finite) population totals plays a major role in this framework in order to decide on the reliability of survey data. When the survey design is complex, and the number of variables is large for which an estimated total is required, generalized variance functions are popular for variance estimation. They allow to circumvent cumbersome theoretical design-based variance formulae or computer-intensive resampling. A synthesis of the superpopulation-based motivation and the survey framework is elaborated. To the author's knowledge, such a synthesis is studied for the first time both theoretically and empirically. Third, the self-organizing map -- an unsupervised machine learning algorithm for data visualization, clustering and even probability estimation -- is introduced. A link to Markov random fields is outlined, which to the author's knowledge has not yet been established, and a density estimator is derived. The latter is evaluated in terms of a Monte-Carlo simulation and then applied to real world business data.

This work studies typical mathematical challenges occurring in the modeling and simulation of manufacturing processes of paper or industrial textiles. In particular, we consider three topics: approximate models for the motion of small inertial particles in an incompressible Newtonian fluid, effective macroscopic approximations for a dilute particle suspension contained in a bounded domain accounting for a non-uniform particle distribution and particle inertia, and possibilities for a reduction of computational cost in the simulations of slender elastic fibers moving in a turbulent fluid flow. We consider the full particle-fluid interface problem given in terms of the Navier-Stokes equations coupled to momentum equations of a small rigid body. By choosing an appropriate asymptotic scaling for the particle-fluid density ratio and using an asymptotic expansion for the solution components, we derive approximations of the original interface problem. The approximate systems differ according to the chosen scaling of the density ratio in their physical behavior allowing the characterization of different inertial regimes. We extend the asymptotic approach to the case of many particles suspended in a Newtonian fluid. Under specific assumptions for the combination of particle size and particle number, we derive asymptotic approximations of this system. The approximate systems describe the particle motion which allows to use a mean field approach in order to formulate the continuity equation for the particle probability density function. The coupling of the latter with the approximation for the fluid momentum equation then reveals a macroscopic suspension description which accounts for non-uniform particle distributions in space and for small particle inertia. A slender fiber in a turbulent air flow can be modeled as a stochastic inextensible one-dimensionally parametrized Kirchhoff beam, i.e., by a stochastic partial differential algebraic equation. Its simulations involve the solution of large non-linear systems of equations by Newton's method. In order to decrease the computational time, we explore different methods for the estimation of the solution. Additionally, we apply smoothing techniques to the Wiener Process in order to regularize the stochastic force driving the fiber, exploring their respective impact on the solution and performance. We also explore the applicability of the Wiener chaos expansion as a solution technique for the simulation of the fiber dynamics.

Traditionell werden Zufallsstichprobenerhebungen so geplant, dass nationale Statistiken zuverlässig mit einer adäquaten Präzision geschätzt werden können. Hierbei kommen vorrangig designbasierte, Modell-unterstützte (engl. model assisted) Schätzmethoden zur Anwendung, die überwiegend auf asymptotischen Eigenschaften beruhen. Für kleinere Stichprobenumfänge, wie man sie für Small Areas (Domains bzw. Subpopulationen) antrifft, eignen sich diese Schätzmethoden eher nicht, weswegen für diese Anwendung spezielle modellbasierte Small Area-Schätzverfahren entwickelt wurden. Letztere können zwar Verzerrungen aufweisen, besitzen jedoch häufig einen kleineren mittleren quadratischen Fehler der Schätzung als dies für designbasierte Schätzer der Fall ist. Den Modell-unterstützten und modellbasierten Methoden ist gemeinsam, dass sie auf statistischen Modellen beruhen; allerdings in unterschiedlichem Ausmass. Modell-unterstützte Verfahren sind in der Regel so konstruiert, dass der Beitrag des Modells bei sehr grossen Stichprobenumfängen gering ist (bei einer Grenzwertbetrachtung sogar wegfällt). Bei modellbasierten Methoden nimmt das Modell immer eine tragende Rolle ein, unabhängig vom Stichprobenumfang. Diese Überlegungen veranschaulichen, dass das unterstellte Modell, präziser formuliert, die Güte der Modellierung für die Qualität der Small Area-Statistik von massgeblicher Bedeutung ist. Wenn es nicht gelingt, die empirischen Daten durch ein passendes Modell zu beschreiben und mit den entsprechenden Methoden zu schätzen, dann können massive Verzerrungen und / oder ineffiziente Schätzungen resultieren. Die vorliegende Arbeit beschäftigt sich mit der zentralen Frage der Robustheit von Small Area-Schätzverfahren. Als robust werden statistische Methoden dann bezeichnet, wenn sie eine beschränkte Einflussfunktion und einen möglichst hohen Bruchpunkt haben. Vereinfacht gesprochen zeichnen sich robuste Verfahren dadurch aus, dass sie nur unwesentlich durch Ausreisser und andere Anomalien in den Daten beeinflusst werden. Die Untersuchung zur Robustheit konzentriert sich auf die folgenden Modelle bzw. Schätzmethoden: i) modellbasierte Schätzer für das Fay-Herriot-Modell (Fay und Herrot, 1979, J. Amer. Statist. Assoc.) und das elementare Unit-Level-Modell (vgl. Battese et al., 1988, J. Amer. Statist. Assoc.). ii) direkte, Modell-unterstützte Schätzer unter der Annahme eines linearen Regressionsmodells. Das Unit-Level-Modell zur Mittelwertschätzung beruht auf einem linearen gemischten Gauss'schen Modell (engl. mixed linear model, MLM) mit blockdiagonaler Kovarianzmatrix. Im Gegensatz zu bspw. einem multiplen linearen Regressionsmodell, besitzen MLM-Modelle keine nennenswerten Invarianzeigenschaften, so dass eine Kontamination der abhängigen Variablen unvermeidbar zu verzerrten Parameterschätzungen führt. Für die Maximum-Likelihood-Methode kann die resultierende Verzerrung nahezu beliebig groß werden. Aus diesem Grund haben Richardson und Welsh (1995, Biometrics) die robusten Schätzmethoden RML 1 und RML 2 entwickelt, die bei kontaminierten Daten nur eine geringe Verzerrung aufweisen und wesentlich effizienter sind als die Maximum-Likelihood-Methode. Eine Abwandlung von Methode RML 2 wurde Sinha und Rao (2009, Canad. J. Statist.) für die robuste Schätzung von Unit-Level-Modellen vorgeschlagen. Allerdings erweisen sich die gebräuchlichen numerischen Verfahren zur Berechnung der RML-2-Methode (dies gilt auch für den Vorschlag von Sinha und Rao) als notorisch unzuverlässig. In dieser Arbeit werden zuerst die Konvergenzprobleme der bestehenden Verfahren erörtert und anschließend ein numerisches Verfahren vorgeschlagen, das sich durch wesentlich bessere numerische Eigenschaften auszeichnet. Schließlich wird das vorgeschlagene Schätzverfahren im Rahmen einer Simulationsstudie untersucht und anhand eines empirischen Beispiels zur Schätzung von oberirdischer Biomasse in norwegischen Kommunen illustriert. Das Modell von Fay-Herriot kann als Spezialfall eines MLM mit blockdiagonaler Kovarianzmatrix aufgefasst werden, obwohl die Varianzen des Zufallseffekts für die Small Areas nicht geschätzt werden müssen, sondern als bereits bekannte Größen betrachtet werden. Diese Eigenschaft kann man sich nun zunutze machen, um die von Sinha und Rao (2009) vorgeschlagene Robustifizierung des Unit-Level-Modells direkt auf das Fay-Herriot Model zu übertragen. In der vorliegenden Arbeit wird jedoch ein alternativer Vorschlag erarbeitet, der von der folgenden Beobachtung ausgeht: Fay und Herriot (1979) haben ihr Modell als Verallgemeinerung des James-Stein-Schätzers motiviert, wobei sie sich einen empirischen Bayes-Ansatz zunutze machen. Wir greifen diese Motivation des Problems auf und formulieren ein analoges robustes Bayes'sches Verfahren. Wählt man nun in der robusten Bayes'schen Problemformulierung die ungünstigste Verteilung (engl. least favorable distribution) von Huber (1964, Ann. Math. Statist.) als A-priori-Verteilung für die Lokationswerte der Small Areas, dann resultiert als Bayes-Schätzer [=Schätzer mit dem kleinsten Bayes-Risk] die Limited-Translation-Rule (LTR) von Efron und Morris (1971, J. Amer. Statist. Assoc.). Im Kontext der frequentistischen Statistik kann die Limited-Translation-Rule nicht verwendet werden, weil sie (als Bayes-Schätzer) auf unbekannten Parametern beruht. Die unbekannten Parameter können jedoch nach dem empirischen Bayes-Ansatz an der Randverteilung der abhängigen Variablen geschätzt werden. Hierbei gilt es zu beachten (und dies wurde in der Literatur vernachlässigt), dass die Randverteilung unter der ungünstigsten A-priori-Verteilung nicht einer Normalverteilung entspricht, sondern durch die ungünstigste Verteilung nach Huber (1964) beschrieben wird. Es ist nun nicht weiter erstaunlich, dass es sich bei den Maximum-Likelihood-Schätzern von Regressionskoeffizienten und Modellvarianz unter der Randverteilung um M-Schätzer mit der Huber'schen psi-Funktion handelt. Unsere theoriegeleitete Herleitung von robusten Schätzern zum Fay-Herriot-Modell zeigt auf, dass bei kontaminierten Daten die geschätzte LTR (mit Parameterschätzungen nach der M-Schätzmethodik) optimal ist und, dass die LTR ein integraler Bestandteil der Schätzmethodik ist (und nicht als ``Zusatz'' o.Ä. zu betrachten ist, wie dies andernorts getan wird). Die vorgeschlagenen M-Schätzer sind robust bei Vorliegen von atypischen Small Areas (Ausreissern), wie dies auch die Simulations- und Fallstudien zeigen. Um auch Robustheit bei Vorkommen von einflussreichen Beobachtungen in den unabhängigen Variablen zu erzielen, wurden verallgemeinerte M-Schätzer (engl. generalized M-estimator) für das Fay-Herriot-Modell entwickelt.

This work deals with the current support landscape for Social Entrepreneurship (SE) in the DACH region. It provides answers to the questions of which actors support SE, how and why they do so, and which social ventures are supported. In addition, there is a focus on the motives for supporting SE as well as the decision-making process while selecting social ventures. In both cases, it is examined whether certain characteristics of the decision-maker and the organization influence the weighting of motives and decision-making criteria. More precise, the gender of the decision-maker as well as the kind of support by the organization is analyzed. The concrete examples of foundations and venture philanthropy organizations (VPOs) will give a deeper look at the SE support motives and decision-making behavior. In a quantitative empirical data collection, by means of an online survey, decision-makers from SE supporting organizations in the DACH region were asked to participate in a conjoint experiment and to fill in a questionnaire. The results illustrate a positive development of the SE support landscape in the German-speaking area as well as the heterogeneity of the organizational types, the financial and non-financial support instruments and the supported social ventures. Regarding the motives for SE-support, a general endeavor to change and to create an impact has proven to be particularly important at the organizational and the individual level. At the individual level female and male decision-makers have subtle differences in their motives to promote SE. Robustness checks by analyzing certain subsamples provide information about that. Individuals from foundations and VPOs, on the other hand, hardly differ from each other, even though here individuals with a rather social background face individuals with a business background. At the organizational level crucial differences can be identified for the motives, depending on the nature of the organization's support, and again comparing foundations with VPOs. Especially for the motives 'financial interests', 'reputation' and 'employee development' there are big differences between the considered groups. Eventually, by means of cluster analysis and still with respect to the support motives, two types of decision-makers could be determined on both the individual and the organizational level. In terms of the decision-making behavior, and the weighting of certain decision-making criteria respectively, it has emerged that it is worthwhile having a closer look: The 'importance of the social problem' and the 'authenticity of the start-up team' are consistently the two most important criteria when it comes to selecting social ventures for supporting them. However, comparing male and female decision-makers, foundations and VPOs, as well as the two groups of financially and non-financially supporting organizations, there are certain specifics which are highly relevant for SE practice. Here as well a cluster analysis uncovered patterns of criteria weighting by identifying three different types of decision-makers.

Many NP-hard optimization problems that originate from classical graph theory, such as the maximum stable set problem and the maximum clique problem, have been extensively studied over the past decades and involve the choice of a subset of edges or vertices. There usually exist combinatorial methods that can be applied to solve them directly in the graph. The most simple method is to enumerate feasible solutions and select the best. It is not surprising that this method is very slow oftentimes, so the task is to cleverly discard fruitless search space during the search. An alternative method to solve graph problems is to formulate integer linear programs, such that their solution yields an optimal solution to the original optimization problem in the graph. In order to solve integer linear programs, one can start with relaxing the integer constraints and then try to find inequalities for cutting off fractional extreme points. In the best case, it would be possible to describe the convex hull of the feasible region of the integer linear program with a set of inequalities. In general, giving a complete description of this convex hull is out of reach, even if it has a polynomial number of facets. Thus, one tries to strengthen the (weak) relaxation of the integer linear program best possible via strong inequalities that are valid for the convex hull of feasible integer points. Many classes of valid inequalities are of exponential size. For instance, a graph can have exponentially many odd cycles in general and therefore the number of odd cycle inequalities for the maximum stable set problem is exponential. It is sometimes possible to check in polynomial time if some given point violates any of the exponentially many inequalities. This is indeed the case for the odd cycle inequalities for the maximum stable set problem. If a polynomial time separation algorithm is known, there exists a formulation of polynomial size that contains a given point if and only if it does not violate one of the (potentially exponentially many) inequalities. This thesis can be divided into two parts. The first part is the main part and it contains various new results. We present new extended formulations for several optimization problems, i.e. the maximum stable set problem, the nonconvex quadratic program with box constraints and the p-median problem. In the second part we modify a very fast algorithm for finding a maximum clique in very large sparse graphs. We suggest and compare three alternative versions of this algorithm to the original version and compare their strengths and weaknesses.

Data used for the purpose of machine learning are often erroneous. In this thesis, p-quasinorms (p<1) are employed as loss functions in order to increase the robustness of training algorithms for artificial neural networks. Numerical issues arising from these loss functions are addressed via enhanced optimization algorithms (proximal point methods; Frank-Wolfe methods) based on the (non-monotonic) Armijo-rule. Numerical experiments comprising 1100 test problems confirm the effectiveness of the approach. Depending on the parametrization, an average reduction of the absolute residuals of up to 64.6% is achieved (aggregated over 100 test problems).

Entrepreneurial ventures are associated with economic growth, job creation, and innovation. Most entrepreneurial ventures need external funding to succeed. However, they often find it difficult to access traditional forms of financing, such as bank loans. To overcome this hurdle and to provide entrepreneurial ventures with badly-needed external capital, many types of entrepreneurial finance have emerged over the past decades and continue to emerge today. Inspired by these dynamics, this postdoctoral thesis contains five empirical studies that address novel questions regarding established (e.g., venture capital, business angels) and new types of entrepreneurial finance (i.e., initial coin offerings).

Die vorgelegte Dissertation trägt den Titel Regularization Methods for Statistical Modelling in Small Area Estimation. In ihr wird die Verwendung regularisierter Regressionstechniken zur geographisch oder kontextuell hochauflösenden Schätzung aggregatspezifischer Kennzahlen auf Basis kleiner Stichproben studiert. Letzteres wird in der Fachliteratur häufig unter dem Begriff Small Area Estimation betrachtet. Der Kern der Arbeit besteht darin die Effekte von regularisierter Parameterschätzung in Regressionsmodellen, welche gängiger Weise für Small Area Estimation verwendet werden, zu analysieren. Dabei erfolgt die Analyse primär auf theoretischer Ebene, indem die statistischen Eigenschaften dieser Schätzverfahren mathematisch charakterisiert und bewiesen werden. Darüber hinaus werden die Ergebnisse durch numerische Simulationen veranschaulicht, und vor dem Hintergrund empirischer Anwendungen kritisch verortet. Die Dissertation ist in drei Bereiche gegliedert. Jeder Bereich behandelt ein individuelles methodisches Problem im Kontext von Small Area Estimation, welches durch die Verwendung regularisierter Schätzverfahren gelöst werden kann. Im Folgenden wird jedes Problem kurz vorgestellt und im Zuge dessen der Nutzen von Regularisierung erläutert. Das erste Problem ist Small Area Estimation in der Gegenwart unbeobachteter Messfehler. In Regressionsmodellen werden typischerweise endogene Variablen auf Basis statistisch verwandter exogener Variablen beschrieben. Für eine solche Beschreibung wird ein funktionaler Zusammenhang zwischen den Variablen postuliert, welcher durch ein Set von Modellparametern charakterisiert ist. Dieses Set muss auf Basis von beobachteten Realisationen der jeweiligen Variablen geschätzt werden. Sind die Beobachtungen jedoch durch Messfehler verfälscht, dann liefert der Schätzprozess verzerrte Ergebnisse. Wird anschließend Small Area Estimation betrieben, so sind die geschätzten Kennzahlen nicht verlässlich. In der Fachliteratur existieren hierfür methodische Anpassungen, welche in der Regel aber restriktive Annahmen hinsichtlich der Messfehlerverteilung benötigen. Im Rahmen der Dissertation wird bewiesen, dass Regularisierung in diesem Kontext einer gegen Messfehler robusten Schätzung entspricht - und zwar ungeachtet der Messfehlerverteilung. Diese Äquivalenz wird anschließend verwendet, um robuste Varianten bekannter Small Area Modelle herzuleiten. Für jedes Modell wird ein Algorithmus zur robusten Parameterschätzung konstruiert. Darüber hinaus wird ein neuer Ansatz entwickelt, welcher die Unsicherheit von Small Area Schätzwerten in der Gegenwart unbeobachteter Messfehler quantifiziert. Es wird zusätzlich gezeigt, dass diese Form der robusten Schätzung die wünschenswerte Eigenschaft der statistischen Konsistenz aufweist. Das zweite Problem ist Small Area Estimation anhand von Datensätzen, welche Hilfsvariablen mit unterschiedlicher Auflösung enthalten. Regressionsmodelle für Small Area Estimation werden normalerweise entweder für personenbezogene Beobachtungen (Unit-Level), oder für aggregatsbezogene Beobachtungen (Area-Level) spezifiziert. Doch vor dem Hintergrund der stetig wachsenden Datenverfügbarkeit gibt es immer häufiger Situationen, in welchen Daten auf beiden Ebenen vorliegen. Dies beinhaltet ein großes Potenzial für Small Area Estimation, da somit neue Multi-Level Modelle mit großem Erklärungsgehalt konstruiert werden können. Allerdings ist die Verbindung der Ebenen aus methodischer Sicht kompliziert. Zentrale Schritte des Inferenzschlusses, wie etwa Variablenselektion und Parameterschätzung, müssen auf beiden Levels gleichzeitig durchgeführt werden. Hierfür existieren in der Fachliteratur kaum allgemein anwendbare Methoden. In der Dissertation wird gezeigt, dass die Verwendung ebenenspezifischer Regularisierungsterme in der Modellierung diese Probleme löst. Es wird ein neuer Algorithmus für stochastischen Gradientenabstieg zur Parameterschätzung entwickelt, welcher die Informationen von allen Ebenen effizient unter adaptiver Regularisierung nutzt. Darüber hinaus werden parametrische Verfahren zur Abschätzung der Unsicherheit für Schätzwerte vorgestellt, welche durch dieses Verfahren erzeugt wurden. Daran anknüpfend wird bewiesen, dass der entwickelte Ansatz bei adäquatem Regularisierungsterm sowohl in der Schätzung als auch in der Variablenselektion konsistent ist. Das dritte Problem ist Small Area Estimation von Anteilswerten unter starken verteilungsbezogenen Abhängigkeiten innerhalb der Kovariaten. Solche Abhängigkeiten liegen vor, wenn eine exogene Variable durch eine lineare Transformation einer anderen exogenen Variablen darstellbar ist (Multikollinearität). In der Fachliteratur werden hierunter aber auch Situationen verstanden, in welchen mehrere Kovariate stark korreliert sind (Quasi-Multikollinearität). Wird auf einer solchen Datenbasis ein Regressionsmodell spezifiziert, dann können die individuellen Beiträge der exogenen Variablen zur funktionalen Beschreibung der endogenen Variablen nicht identifiziert werden. Die Parameterschätzung ist demnach mit großer Unsicherheit verbunden und resultierende Small Area Schätzwerte sind ungenau. Der Effekt ist besonders stark, wenn die zu modellierende Größe nicht-linear ist, wie etwa ein Anteilswert. Dies rührt daher, dass die zugrundeliegende Likelihood-Funktion nicht mehr geschlossen darstellbar ist und approximiert werden muss. Im Rahmen der Dissertation wird gezeigt, dass die Verwendung einer L2-Regularisierung den Schätzprozess in diesem Kontext signifikant stabilisiert. Am Beispiel von zwei nicht-linearen Small Area Modellen wird ein neuer Algorithmus entwickelt, welche den bereits bekannten Quasi-Likelihood Ansatz (basierend auf der Laplace-Approximation) durch Regularisierung erweitert und verbessert. Zusätzlich werden parametrische Verfahren zur Unsicherheitsmessung für auf diese Weise erhaltene Schätzwerte beschrieben. Vor dem Hintergrund der theoretischen und numerischen Ergebnisse wird in der Dissertation demonstriert, dass Regularisierungsmethoden eine wertvolle Ergänzung der Fachliteratur für Small Area Estimation darstellen. Die hier entwickelten Verfahren sind robust und vielseitig einsetzbar, was sie zu hilfreichen Werkzeugen der empirischen Datenanalyse macht.

This dissertation investigates corporate acquisition decisions that represent important corporate development activities for family and non-family firms. The main research objective of this dissertation is to generate insights into the subjective decision-making behavior of corporate decision-makers from family and non-family firms and their weighting of M&A decision-criteria during the early pre-acquisition target screening and selection process. The main methodology chosen for the investigation of M&A decision-making preferences and the weighting of M&A decision criteria is a choice-based conjoint analysis. The overall sample of this dissertation consists of 304 decision-makers from 264 private and public family and non-family firms from mainly Germany and the DACH-region. In the first empirical part of the dissertation, the relative importance of strategic, organizational and financial M&A decision-criteria for corporate acquirers in acquisition target screening is investigated. In addition, the author uses a cluster analysis to explore whether distinct decision-making patterns exist in acquisition target screening. In the second empirical part, the dissertation explores whether there are differences in investment preferences in acquisition target screening between family and non-family firms and within the group of family firms. With regards to the heterogeneity of family firms, the dissertation generated insights into how family-firm specific characteristics like family management, the generational stage of the firm and non-economic goals such as transgenerational control intention influences the weighting of different M&A decision criteria in acquisition target screening. The dissertation contributes to strategic management research, in specific to M&A literature, and to family business research. The results of this dissertation generate insights into the weighting of M&A decision-making criteria and facilitate a better understanding of corporate M&A decisions in family and non-family firms. The findings show that decision-making preferences (hence the weighting of M&A decision criteria) are influenced by characteristics of the individual decision-maker, the firm and the environment in which the firm operates.

This dissertation deals with consistent estimates in household surveys. Household surveys are often drawn via cluster sampling, with households sampled at the first stage and persons selected at the second stage. The collected data provide information for estimation at both the person and the household level. However, consistent estimates are desirable in the sense that the estimated household-level totals should coincide with the estimated totals obtained at the person-level. Current practice in statistical offices is to use integrated weighting. In this approach consistent estimates are guaranteed by equal weights for all persons within a household and the household itself. However, due to the forced equality of weights, the individual patterns of persons are lost and the heterogeneity within households is not taken into account. In order to avoid the negative consequences of integrated weighting, we propose alternative weighting methods in the first part of this dissertation that ensure both consistent estimates and individual person weights within a household. The underlying idea is to limit the consistency conditions to variables that emerge in both the personal and household data sets. These common variables are included in the person- and household-level estimator as additional auxiliary variables. This achieves consistency more directly and only for the relevant variables, rather than indirectly by forcing equal weights on all persons within a household. Further decisive advantages of the proposed alternative weighting methods are that original individual rather than the constructed aggregated auxiliaries are utilized and that the variable selection process is more flexible because different auxiliary variables can be incorporated in the person-level estimator than in the household-level estimator. In the second part of this dissertation, the variances of a person-level GREG estimator and an integrated estimator are compared in order to quantify the effects of the consistency requirements in the integrated weighting approach. One of the challenges is that the estimators to be compared are of different dimensions. The proposed solution is to decompose the variance of the integrated estimator into the variance of a reduced GREG estimator, whose underlying model is of the same dimensions as the person-level GREG estimator, and add a constructed term that captures the effects disregarded by the reduced model. Subsequently, further fields of application for the derived decomposition are proposed such as the variable selection process in the field of econometrics or survey statistics.

We consider a linear regression model for which we assume that some of the observed variables are irrelevant for the prediction. Including the wrong variables in the statistical model can either lead to the problem of having too little information to properly estimate the statistic of interest, or having too much information and consequently describing fictitious connections. This thesis considers discrete optimization to conduct a variable selection. In light of this, the subset selection regression method is analyzed. The approach gained a lot of interest in recent years due to its promising predictive performance. A major challenge associated with the subset selection regression is the computational difficulty. In this thesis, we propose several improvements for the efficiency of the method. Novel bounds on the coefficients of the subset selection regression are developed, which help to tighten the relaxation of the associated mixed-integer program, which relies on a Big-M formulation. Moreover, a novel mixed-integer linear formulation for the subset selection regression based on a bilevel optimization reformulation is proposed. Finally, it is shown that the perspective formulation of the subset selection regression is equivalent to a state-of-the-art binary formulation. We use this insight to develop novel bounds for the subset selection regression problem, which show to be highly effective in combination with the proposed linear formulation. In the second part of this thesis, we examine the statistical conception of the subset selection regression and conclude that it is misaligned with its intention. The subset selection regression uses the training error to decide on which variables to select. The approach conducts the validation on the training data, which oftentimes is not a good estimate of the prediction error. Hence, it requires a predetermined cardinality bound. Instead, we propose to select variables with respect to the cross-validation value. The process is formulated as a mixed-integer program with the sparsity becoming subject of the optimization. Usually, a cross-validation is used to select the best model out of a few options. With the proposed program the best model out of all possible models is selected. Since the cross-validation is a much better estimate of the prediction error, the model can select the best sparsity itself. The thesis is concluded with an extensive simulation study which provides evidence that discrete optimization can be used to produce highly valuable predictive models with the cross-validation subset selection regression almost always producing the best results.

External capital plays an important role in financing entrepreneurial ventures, due to limited internal capital sources. An important external capital provider for entrepreneurial ventures are venture capitalists (VCs). VCs worldwide are often confronted with thousands of proposals of entrepreneurial ventures per year and must choose among all of these companies in which to invest. Not only do VCs finance companies at their early stages, but they also finance entrepreneurial companies in their later stages, when companies have secured their first market success. That is why this dissertation focuses on the decision-making behavior of VCs when investing in later-stage ventures. This dissertation uses both qualitative as well as quantitative research methods in order to provide answer to how the decision-making behavior of VCs that invest in later-stage ventures can be described. Based on qualitative interviews with 19 investment professionals, the first insight gained is that for different stages of venture development, different decision criteria are applied. This is attributed to different risks and goals of ventures at different stages, as well as the different types of information available. These decision criteria in the context of later-stage ventures contrast with results from studies that focus on early-stage ventures. Later-stage ventures possess meaningful information on financials (revenue growth and profitability), the established business model, and existing external investors that is not available for early-stage ventures and therefore constitute new decision criteria for this specific context. Following this identification of the most relevant decision criteria for investors in the context of later-stage ventures, a conjoint study with 749 participants was carried out to understand the relative importance of decision criteria. The results showed that investors attribute the highest importance to 1) revenue growth, (2) value-added of products/services for customers, and (3) management team track record, demonstrating differences when compared to decision-making studies in the context of early-stage ventures. Not only do the characteristics of a venture influence the decision to invest, additional indirect factors, such as individual characteristics or characteristics of the investment firm, can influence individual decisions. Relying on cognitive theory, this study investigated the influence of various individual characteristics on screening decisions and found that both investment experience and entrepreneurial experience have an influence on individual decision-making behavior. This study also examined whether goals, incentive structures, resources, and governance of the investment firm influence decision making in the context of later-stage ventures. This study particularly investigated two distinct types of investment firms, family offices and corporate venture capital funds (CVC), which have unique structures, goals, and incentive systems. Additional quantitative analysis showed that family offices put less focus on high-growth firms and whether reputable investors are present. They tend to focus more on the profitability of a later-stage venture in the initial screening. The analysis showed that CVCs place greater importance on product and business model characteristics than other investors. CVCs also favor later-stage ventures with lower revenue growth rates, indicating a preference for less risky investments. The results provide various insights for theory and practice.

This doctoral thesis examines intergenerational knowledge, its antecedents as well as how participation in intergenerational knowledge transfer is related to the performance evaluation of employees. To answer these questions, this doctoral thesis builds on a literature review and quantitative research methods. A systematic literature study shows that empirical evidence on intergenerational knowledge transfer is limited. Building on prior literature, effects of various antecedents at the interpersonal and organizational level regarding their effects on intergenerational and intragenerational knowledge transfer are postulated. By questioning 444 trainees and trainers, this doctoral thesis also demonstrates that interpersonal antecedents impact how trainees participate in intergenerational knowledge transfer with their trainers. Thereby, the results of this study provide support that interpersonal antecedents are relevant for intergenerational knowledge transfer, yet, also emphasize the implications attached to the assigned roles in knowledge transfer (i.e., whether one is a trainee or trainer). Moreover, the results of an experimental vignette study reveal that participation in intergenerational knowledge transfer is linked to the performance evaluation of employees, yet, is susceptible to whether the employee is sharing or seeking knowledge. Overall, this doctoral thesis provides insights into this topic by covering a multitude of antecedents of intergenerational knowledge transfer, as well as how participation in intergenerational knowledge transfer may be associated with the performance evaluation of employees.

A basic assumption of standard small area models is that the statistic of interest can be modelled through a linear mixed model with common model parameters for all areas in the study. The model can then be used to stabilize estimation. In some applications, however, there may be different subgroups of areas, with specific relationships between the response variable and auxiliary information. In this case, using a distinct model for each subgroup would be more appropriate than employing one model for all observations. If no suitable natural clustering variable exists, finite mixture regression models may represent a solution that „lets the data decide“ how to partition areas into subgroups. In this framework, a set of two or more different models is specified, and the estimation of subgroup-specific model parameters is performed simultaneously to estimating subgroup identity, or the probability of subgroup identity, for each area. Finite mixture models thus offer a fexible approach to accounting for unobserved heterogeneity. Therefore, in this thesis, finite mixtures of small area models are proposed to account for the existence of latent subgroups of areas in small area estimation. More specifically, it is assumed that the statistic of interest is appropriately modelled by a mixture of K linear mixed models. Both mixtures of standard unit-level and standard area-level models are considered as special cases. The estimation of mixing proportions, area-specific probabilities of subgroup identity and the K sets of model parameters via the EM algorithm for mixtures of mixed models is described. Eventually, a finite mixture small area estimator is formulated as a weighted mean of predictions from model 1 to K, with weights given by the area-specific probabilities of subgroup identity.

The dissertation deals with methods to improve design-based and model-assisted estimation techniques for surveys in a finite population framework. The focus is on the development of the statistical methodology as well as their implementation by means of tailor-made numerical optimization strategies. In that regard, the developed methods aim at computing statistics for several potentially conflicting variables of interest at aggregated and disaggregated levels of the population on the basis of one single survey. The work can be divided into two main research questions, which are briefly explained in the following sections. First, an optimal multivariate allocation method is developed taking into account several stratification levels. This approach results in a multi-objective optimization problem due to the simultaneous consideration of several variables of interest. In preparation for the numerical solution, several scalarization and standardization techniques are presented, which represent the different preferences of potential users. In addition, it is shown that by solving the problem scalarized with a weighted sum for all combinations of weights, the entire Pareto frontier of the original problem can be generated. By exploiting the special structure of the problem, the scalarized problems can be efficiently solved by a semismooth Newton method. In order to apply this numerical method to other scalarization techniques as well, an alternative approach is suggested, which traces the problem back to the weighted sum case. To address regional estimation quality requirements at multiple stratification levels, the potential use of upper bounds for regional variances is integrated into the method. In addition to restrictions on regional estimates, the method enables the consideration of box-constraints for the stratum-specific sample sizes, allowing minimum and maximum stratum-specific sampling fractions to be defined. In addition to the allocation method, a generalized calibration method is developed, which is supposed to achieve coherent and efficient estimates at different stratification levels. The developed calibration method takes into account a very large number of benchmarks at different stratification levels, which may be obtained from different sources such as registers, paradata or other surveys using different estimation techniques. In order to incorporate the heterogeneous quality and the multitude of benchmarks, a relaxation of selected benchmarks is proposed. In that regard, predefined tolerances are assigned to problematic benchmarks at low aggregation levels in order to avoid an exact fulfillment. In addition, the generalized calibration method allows the use of box-constraints for the correction weights in order to avoid an extremely high variation of the weights. Furthermore, a variance estimation by means of a rescaling bootstrap is presented. Both developed methods are analyzed and compared with existing methods in extensive simulation studies on the basis of a realistic synthetic data set of all households in Germany. Due to the similar requirements and objectives, both methods can be successively applied to a single survey in order to combine their efficiency advantages. In addition, both methods can be solved in a time-efficient manner using very comparable optimization approaches. These are based on transformations of the optimality conditions. The dimension of the resulting system of equations is ultimately independent of the dimension of the original problem, which enables the application even for very large problem instances.

This dissertation is dedicated to the analysis of the stabilty of portfolio risk and the impact of European regulation introducing risk based classifications for investment funds. The first paper examines the relationship between portfolio size and the stability of mutual fund risk measures, presenting evidence for economies of scale in risk management. In a unique sample of 338 fund portfolios we find that the volatility of risk numbers decreases for larger funds. This finding holds for dispersion as well as tail risk measures. Further analyses across asset classes provide evidence for the robustness of the effect for balanced and fixed income portfolios. However, a size effect did not emerge for equity funds, suggesting that equity fund managers simply scale their strategy up as they grow. Analyses conducted on the differences in risk stability between tail risk measures and volatilities reveal that smaller funds show higher discrepancies in that respect. In contrast to the majority of prior studies on the basis of ex-post time series risk numbers, this study contributes to the literature by using ex-ante risk numbers based on the actual assets and de facto portfolio data. The second paper examines the influence of European legislation regarding risk classification of mutual funds. We conduct analyses on a set of worldwide equity indices and find that a strategy based on the long term volatility as it is imposed by the Synthetic Risk Reward Indicator (SRRI) would lead to substantial variations in exposures ranging from short phases of very high leverage to long periods of under investments that would be required to keep the risk classes. In some cases, funds will be forced to migrate to higher risk classes due to limited means to reduce volatilities after crises events. In other cases they might have to migrate to lower risk classes or increase their leverage to ridiculous amounts. Overall, we find if the SRRI creates a binding mechanism for fund managers, it will create substantial interference with the core investment strategy and may incur substantial deviations from it. Fruthermore due to the forced migrations the SRRI degenerates to a passive indicator. The third paper examines the impact of this volatility based fund classification on portfolio performance. Using historical data on equity indices we find initially that a strategy based on long term portfolio volatility, as it is imposed by the Synthetic Risk Reward Indicator (SRRI), yields better Sharpe Ratios (SRs) and Buy and Hold Returns (BHRs) for the investment strategies matching the risk classes. Accounting for the Fama-French factors reveals no significant alphas for the vast majority of the strategies. In our simulation study where volatility was modelled through a GJR(1,1) - model we find no significant difference in mean returns, but significantly lower SRs for the volatility based strategies. These results were confirmed in robustness checks using alternative models and timeframes. Overall we present evidence which suggests that neither the higher leverage induced by the SRRI nor the potential protection in downside markets does pay off on a risk adjusted basis.