### Refine

#### Document Type

- Doctoral Thesis (54)
- Article (2)
- Habilitation (1)

#### Keywords

- Optimierung (6)
- Finanzierung (4)
- Schätzung (4)
- Stichprobe (4)
- Erhebungsverfahren (3)
- Unternehmen (3)
- survey statistics (3)
- Amtliche Statistik (2)
- Analysis (2)
- Approximation (2)

#### Institute

- Fachbereich 4 (57) (remove)

Survey data can be viewed as incomplete or partially missing from a variety of perspectives and there are different ways of dealing with this kind of data in the prediction and the estimation of economic quantities. In this thesis, we present two selected research contexts in which the prediction or estimation of economic quantities is examined under incomplete survey data.
These contexts are first the investigation of composite estimators in the German Microcensus (Chapters 3 and 4) and second extensions of multivariate Fay-Herriot (MFH) models (Chapters 5 and 6), which are applied to small area problems.
Composite estimators are estimation methods that take into account the sample overlap in rotating panel surveys such as the German Microcensus in order to stabilise the estimation of the statistics of interest (e.g. employment statistics). Due to the partial sample overlaps, information from previous samples is only available for some of the respondents, so the data are partially missing.
MFH models are model-based estimation methods that work with aggregated survey data in order to obtain more precise estimation results for small area problems compared to classical estimation methods. In these models, several variables of interest are modelled simultaneously. The survey estimates of these variables, which are used as input in the MFH models, are often partially missing. If the domains of interest are not explicitly accounted for in a sampling design, the sizes of the samples allocated to them can, by chance, be small. As a result, it can happen that either no estimates can be calculated at all or that the estimated values are not published by statistical offices because their variances are too large.

Die Dissertation beschäftigt sich mit einer neuartigen Art von Branch-and-Bound Algorithmen, deren Unterschied zu klassischen Branch-and-Bound Algorithmen darin besteht, dass
das Branching durch die Addition von nicht-negativen Straftermen zur Zielfunktion erfolgt
anstatt durch das Hinzufügen weiterer Nebenbedingungen. Die Arbeit zeigt die theoretische Korrektheit des Algorithmusprinzips für verschiedene allgemeine Klassen von Problemen und evaluiert die Methode für verschiedene konkrete Problemklassen. Für diese Problemklassen, genauer Monotone und Nicht-Monotone Gemischtganzzahlige Lineare Komplementaritätsprobleme und Gemischtganzzahlige Lineare Probleme, präsentiert die Arbeit
verschiedene problemspezifische Verbesserungsmöglichkeiten und evaluiert diese numerisch.
Weiterhin vergleicht die Arbeit die neue Methode mit verschiedenen Benchmark-Methoden
mit größtenteils guten Ergebnissen und gibt einen Ausblick auf weitere Anwendungsgebiete
und zu beantwortende Forschungsfragen.

Sample surveys are a widely used and cost effective tool to gain information about a population under consideration. Nowadays, there is an increasing demand not only for information on the population level but also on the level of subpopulations. For some of these subpopulations of interest, however, very small subsample sizes might occur such that the application of traditional estimation methods is not expedient. In order to provide reliable information also for those so called small areas, small area estimation (SAE) methods combine auxiliary information and the sample data via a statistical model.
The present thesis deals, among other aspects, with the development of highly flexible and close to reality small area models. For this purpose, the penalized spline method is adequately modified which allows to determine the model parameters via the solution of an unconstrained optimization problem. Due to this optimization framework, the incorporation of shape constraints into the modeling process is achieved in terms of additional linear inequality constraints on the optimization problem. This results in small area estimators that allow for both the utilization of the penalized spline method as a highly flexible modeling technique and the incorporation of arbitrary shape constraints on the underlying P-spline function.
In order to incorporate multiple covariates, a tensor product approach is employed to extend the penalized spline method to multiple input variables. This leads to high-dimensional optimization problems for which naive solution algorithms yield an unjustifiable complexity in terms of runtime and in terms of memory requirements. By exploiting the underlying tensor nature, the present thesis provides adequate computationally efficient solution algorithms for the considered optimization problems and the related memory efficient, i.e. matrix-free, implementations. The crucial point thereby is the (repetitive) application of a matrix-free conjugated gradient method, whose runtime is drastically reduced by a matrx-free multigrid preconditioner.

Nonlocal operators are used in a wide variety of models and applications due to many natural phenomena being driven by nonlocal dynamics. Nonlocal operators are integral operators allowing for interactions between two distinct points in space. The nonlocal models investigated in this thesis involve kernels that are assumed to have a finite range of nonlocal interactions. Kernels of this type are used in nonlocal elasticity and convection-diffusion models as well as finance and image analysis. Also within the mathematical theory they arouse great interest, as they are asymptotically related to fractional and classical differential equations.
The results in this thesis can be grouped according to the following three aspects: modeling and analysis, discretization and optimization.
Mathematical models demonstrate their true usefulness when put into numerical practice. For computational purposes, it is important that the support of the kernel is clearly determined. Therefore nonlocal interactions are typically assumed to occur within an Euclidean ball of finite radius. In this thesis we consider more general interaction sets including norm induced balls as special cases and extend established results about well-posedness and asymptotic limits.
The discretization of integral equations is a challenging endeavor. Especially kernels which are truncated by Euclidean balls require carefully designed quadrature rules for the implementation of efficient finite element codes. In this thesis we investigate the computational benefits of polyhedral interaction sets as well as geometrically approximated interaction sets. In addition to that we outline the computational advantages of sufficiently structured problem settings.
Shape optimization methods have been proven useful for identifying interfaces in models governed by partial differential equations. Here we consider a class of shape optimization problems constrained by nonlocal equations which involve interface-dependent kernels. We derive the shape derivative associated to the nonlocal system model and solve the problem by established numerical techniques.

This work studies typical mathematical challenges occurring in the modeling and simulation of manufacturing processes of paper or industrial textiles. In particular, we consider three topics: approximate models for the motion of small inertial particles in an incompressible Newtonian fluid, effective macroscopic approximations for a dilute particle suspension contained in a bounded domain accounting for a non-uniform particle distribution and particle inertia, and possibilities for a reduction of computational cost in the simulations of slender elastic fibers moving in a turbulent fluid flow.
We consider the full particle-fluid interface problem given in terms of the Navier-Stokes equations coupled to momentum equations of a small rigid body. By choosing an appropriate asymptotic scaling for the particle-fluid density ratio and using an asymptotic expansion for the solution components, we derive approximations of the original interface problem. The approximate systems differ according to the chosen scaling of the density ratio in their physical behavior allowing the characterization of different inertial regimes.
We extend the asymptotic approach to the case of many particles suspended in a Newtonian fluid. Under specific assumptions for the combination of particle size and particle number, we derive asymptotic approximations of this system. The approximate systems describe the particle motion which allows to use a mean field approach in order to formulate the continuity equation for the particle probability density function. The coupling of the latter with the approximation for the fluid momentum equation then reveals a macroscopic suspension description which accounts for non-uniform particle distributions in space and for small particle inertia.
A slender fiber in a turbulent air flow can be modeled as a stochastic inextensible one-dimensionally parametrized Kirchhoff beam, i.e., by a stochastic partial differential algebraic equation. Its simulations involve the solution of large non-linear systems of equations by Newton's method. In order to decrease the computational time, we explore different methods for the estimation of the solution. Additionally, we apply smoothing techniques to the Wiener Process in order to regularize the stochastic force driving the fiber, exploring their respective impact on the solution and performance. We also explore the applicability of the Wiener chaos expansion as a solution technique for the simulation of the fiber dynamics.

For decades, academics and practitioners aim to understand whether and how (economic) events affect firm value. Optimally, these events occur exogenously, i.e. suddenly and unexpectedly, so that an accurate evaluation of the effects on firm value can be conducted. However, recent studies show that even the evaluation of exogenous events is often prone to many challenges that can lead to diverse interpretations, resulting in heated debates. Recently, there have been intense debates in particular on the impact of takeover defenses and of Covid-19 on firm value. The announcements of takeover defenses and the propagation of Covid-19 are exogenous events that occur worldwide and are economically important, but have been insufficiently examined. By answering open research questions, this dissertation aims to provide a greater understanding about the heterogeneous effects that exogenous events such as the announcements of takeover defenses and the propagation of Covid-19 have on firm value. In addition, this dissertation analyzes the influence of certain firm characteristics on the effects of these two exogenous events and identifies influencing factors that explain contradictory results in the existing literature and thus can reconcile different views.

Even though proper research on Cauchy transforms has been done, there are still a lot of open questions. For example, in the case of representation theorems, i.e. the question when a function can be represented as a Cauchy transform, there is 'still no completely satisfactory answer' ([9], p. 84). There are characterizations for measures on the circle as presented in the monograph [7] and for general compactly supported measures on the complex plane as presented in [27]. However, there seems to exist no systematic treatise of the Cauchy transform as an operator on $L_p$ spaces and weighted $L_p$ spaces on the real axis.
This is the point where this thesis draws on and we are interested in developing several characterizations for the representability of a function by Cauchy transforms of $L_p$ functions. Moreover, we will attack the issue of integrability of Cauchy transforms of functions and measures, a topic which is only partly explored (see [43]). We will develop different approaches involving Fourier transforms and potential theory and investigate into sufficient conditions and characterizations.
For our purposes, we shall need some notation and the concept of Hardy spaces which will be part of the preliminary Chapter 1. Moreover, we introduce Fourier transforms and their complex analogue, namely Fourier-Laplace transforms. This will be of extraordinary usage due to the close connection of Cauchy and Fourier(-Laplace) transforms.
In the second chapter we shall begin our research with a discussion of the Cauchy transformation on the classical (unweighted) $L_p$ spaces. Therefore, we start with the boundary behavior of Cauchy transforms including an adapted version of the Sokhotski-Plemelj formula. This result will turn out helpful for the determination of the image of the Cauchy transformation under $L_p(\R)$ for $p\in(1,\infty).$ The cases $p=1$ and $p=\infty$ are playing special roles here which justifies a treatise in separate sections. For $p=1$ we will involve the real Hardy space $H_{1}(\R)$ whereas the case $p=\infty$ shall be attacked by an approach incorporating intersections of Hardy spaces and certain subspaces of $L_{\infty}(\R).$
The third chapter prepares ourselves for the study of the Cauchy transformation on subspaces of $L_{p}(\R).$ We shall give a short overview of the basic facts about Cauchy transforms of measures and then proceed to Cauchy transforms of functions with support in a closed set $X\subset\R.$ Our goal is to build up the main theory on which we can fall back in the subsequent chapters.
The fourth chapter deals with Cauchy transforms of functions and measures supported by an unbounded interval which is not the entire real axis. For convenience we restrict ourselves to the interval $[0,\infty).$ Bringing once again the Fourier-Laplace transform into play, we deduce complex characterizations for the Cauchy transforms of functions in $L_{2}(0,\infty).$ Moreover, we analyze the behavior of Cauchy transform on several half-planes and shall use these results for a fairly general geometric characterization. In the second section of this chapter, we focus on Cauchy transforms of measures with support in $[0,\infty).$ In this context, we shall derive a reconstruction formula for these Cauchy transforms holding under pretty general conditions as well as results on the behaviur on the left half-plane. We close this chapter by rather technical real-type conditions and characterizations for Cauchy transforms of functions in $L_p(0,\infty)$ basing on an approach in [82].
The most common case of Cauchy transforms, those of compactly supported functions or measures, is the subject of Chapter 5. After complex and geometric characterizations originating from similar ideas as in the fourth chapter, we adapt a functional-analytic approach in [27] to special measures, namely those with densities to a given complex measure $\mu.$ The chapter is closed with a study of the Cauchy transformation on weighted $L_p$ spaces. Here, we choose an ansatz through the finite Hilbert transform on $(-1,1).$
The sixth chapter is devoted to the issue of integrability of Cauchy transforms. Since this topic has no comprehensive treatise in literature yet, we start with an introduction of weighted Bergman spaces and general results on the interaction of the Cauchy transformation in these spaces. Afterwards, we combine the theory of Zen spaces with Cauchy transforms by using once again their connection with Fourier transforms. Here, we shall encounter general Paley-Wiener theorems of the recent past. Lastly, we attack the issue of integrability of Cauchy transforms by means of potential theory. Therefore, we derive a Fourier integral formula for the logarithmic energy in one and multiple dimensions and give applications to Fourier and hence Cauchy transforms.
Two appendices are annexed to this thesis. The first one covers important definitions and results from measure theory with a special focus on complex measures. The second appendix contains Cauchy transforms of frequently used measures and functions with detailed calculations.

The economic growth theory analyses which factors affect economic growth and tries to analyze how it can last. A popular neoclassical growth model is the Ramsey-Cass-Koopmans model, which aims to determine how much of its income a nation or an economy should save in order to maximize its welfare. In this thesis, we present and analyze an extended capital accumulation equation of a spatial version of the Ramsey model, balancing diffusive and agglomerative effects. We model the capital mobility in space via a nonlocal diffusion operator which allows for jumps of the capital stock from one location to an other. Moreover, this operator smooths out heterogeneities in the factor distributions slower, which generated a more realistic behavior of capital flows. In addition to that, we introduce an endogenous productivity-production operator which depends on time and on the capital distribution in space. This operator models the technological progress of the economy. The resulting mathematical model is an optimal control problem under a semilinear parabolic integro-differential equation with initial and volume constraints, which are a nonlocal analog to local boundary conditions, and box-constraints on the state and the control variables. In this thesis, we consider this problem on a bounded and unbounded spatial domain, in both cases with a finite time horizon. We derive existence results of weak solutions for the capital accumulation equations in both settings and we proof the existence of a Ramsey equilibrium in the unbounded case. Moreover, we solve the optimal control problem numerically and discuss the results in the economic context.

Hybrid Modelling in general, describes the combination of at least two different methods to solve one specific task. As far as this work is concerned, Hybrid Models describe an approach to combine sophisticated, well-studied mathematical methods with Deep Neural Networks to solve parameter estimation tasks. To combine these two methods, the data structure of artifi- cially generated acceleration data of an approximate vehicle model, the Quarter-Car-Model, is exploited. Acceleration of individual components within a coupled dynamical system, can be described as a second order ordinary differential equation, including velocity and dis- placement of coupled states, scaled by spring - and damping-coefficient of the system. An appropriate numerical integration scheme can then be used to simulate discrete acceleration profiles of the Quarter-Car-Model with a random variation of the parameters of the system. Given explicit knowledge about the data structure, one can then investigate under which con- ditions it is possible to estimate the parameters of the dynamical system for a set of randomly generated data samples. We test, if Neural Networks are capable to solve parameter estima- tion problems in general, or if they can be used to solve several sub-tasks, which support a state-of-the-art parameter estimation method. Hybrid Models are presented for parameter estimation under uncertainties, including for instance measurement noise or incompleteness of measurements, which combine knowledge about the data structure and several Neural Networks for robust parameter estimation within a dynamical system.

Our goal is to approximate energy forms on suitable fractals by discrete graph energies and certain metric measure spaces, using the notion of quasi-unitary equivalence. Quasi-unitary equivalence generalises the two concepts of unitary equivalence and norm resolvent convergence to the case of operators and energy forms defined in varying Hilbert spaces.
More precisely, we prove that the canonical sequence of discrete graph energies (associated with the fractal energy form) converges to the energy form (induced by a resistance form) on a finitely ramified fractal in the sense of quasi-unitary equivalence. Moreover, we allow a perturbation by magnetic potentials and we specify the corresponding errors.
This aforementioned approach is an approximation of the fractal from within (by an increasing sequence of finitely many points). The natural step that follows this realisation is the question whether one can also approximate fractals from outside, i.e., by a suitable sequence of shrinking supersets. We partly answer this question by restricting ourselves to a very specific structure of the approximating sets, namely so-called graph-like manifolds that respect the structure of the fractals resp. the underlying discrete graphs. Again, we show that the canonical (properly rescaled) energy forms on such a sequence of graph-like manifolds converge to the fractal energy form (in the sense of quasi-unitary equivalence).
From the quasi-unitary equivalence of energy forms, we conclude the convergence of the associated linear operators, convergence of the spectra and convergence of functions of the operators – thus essentially the same as in the case of the usual norm resolvent convergence.

Issues in Price Measurement
(2022)

This thesis focuses on the issues in price measurement and consists of three chapters. Due to outdated weighting information, a Laspeyres-based consumer price index (CPI) is prone to accumulating upward bias. Therefore, chapter 1 introduces and examines simple and transparent revision approaches that retrospectively address the source of the bias. They provide a consistent long-run time series of the CPI and require no additional information. Furthermore, a coherent decomposition of the bias into the contributions of individual product groups is developed. In a case study, the approaches are applied to a Laspeyres-based CPI. The empirical results confirm the theoretical predictions. The proposed revision approaches are adoptable not only to most national CPIs but also to other price-level measures such as the producer price index or the import and export price indices.
Chapter 2 is dedicated to the measurement of import and export price indices. Such indices are complicated by the impact of exchange rates. These indices are usually also compiled by some Laspeyres type index. Therefore, substitution bias is an issue. The terms of trade (ratio of export and import price index) are therefore also likely to be distorted. The underlying substitution bias accumulates over time. The present article applies a simple and transparent retroactive correction approach that addresses the source of the substitution bias and produces meaningful long-run time series of import and export price levels and, therefore, of the terms of trade. Furthermore, an empirical case study is conducted that demonstrates the efficacy and versatility of the correction approach.
Chapter 3 leaves the field of index revision and studies another issue in price measurement, namely, the economic evaluation of digital products in monetary terms that have zero market prices. This chapter explores different methods of economic valuation and pricing of free digital products and proposes an alternative way to calculate the economic value and a shadow price of free digital products: the Usage Cost Model (UCM). The goal of the chapter is, first of all, to formulate a theoretical framework and incorporate an alternative measure of the value of free digital products. However, an empirical application is also made to show the work of the theoretical model. Some conclusions on applicability are drawn at the end of the chapter.

This thesis comprises of four research papers on the economics of education and industrial relations, which contribute to the field of empirical economic research. All of the corresponding papers focus on analysing how much time individuals spend on specific activities. The allocation of available time resources is a decision that individuals make throughout their lifetime. In this thesis, we consider individuals at different stages of their lives - students at school, university students, and dependent employees at the workplace.
Part I includes two research studies on student's behaviour in secondary and tertiary education.
Chapter 2 explores whether students who are relatively younger or older within the school year exhibit differential time allocation. Building on previous findings showing that relatively younger students perform worse in school, the study shows that relatively younger students are aware of their poor performance in school and feel more strain as a result. Nevertheless, there are no clear differences to be found in terms of time spent on homework, while relatively younger students spend more time watching television and less time on sports activities. Thus, the results suggest that the lower learning outcomes are not associated with different time allocations between school-related activities and non-school-related activities.
Chapter 3 analyses how individual ability and labour market prospects affect study behaviour. The theoretical modelling predicts that both determinants increase study effort. The empirical investigation is based on cross-sectional data from the National Educational Panel Study (NEPS) and includes thousands of students in Germany. The analyses show that more gifted students exhibit lower subjective effort levels and invest less time in self-study. In contrast, very good labour market prospects lead to more effort exerted by the student, both qualitatively and quantitatively. The potential endogeneity problem is taken into account by using regional unemployment data as an instrumental variable.
Part II includes two labour economic studies on determinants of overtime. Both studies belong to the field of industrial relations, as they focus on union membership on the one hand and the interplay of works councils and collective bargaining coverage on the other.
Chapter 4 shows that union members work less overtime than non-members do. The econometric approach takes the problem of unobserved heterogeneity into account; but provides no evidence that this issue affects the results. Different channels that could lead to this relationship are analysed by examining relevant subgroups separately. For example, this effect of union membership can also be observed in establishments with works councils and for workers who are very likely to be covered by collective bargaining agreements. The study concludes that the observed effect is due to the fact that union membership can protect workers from corresponding increased working time demands by employers.
Chapter 5 builds on previous studies showing a negative effect of works councils on overtime. In addition to co-determination by works councils at the firm level, collective bargaining coverage is an important factor in the German industrial relations system. Corresponding data was not available in the SOEP for quite some time. Therefore, the study uses recent SOEP data, which also contains information on collective bargaining coverage. A cross-sectional analysis is conducted to examine the effects of works councils in establishments with and without collective bargaining coverage. Similar to studies analysing other outcome variables, the results show that the effect of works councils exists only for employees covered by a collective bargaining agreement.

Traditionell werden Zufallsstichprobenerhebungen so geplant, dass nationale Statistiken zuverlässig mit einer adäquaten Präzision geschätzt werden können. Hierbei kommen vorrangig designbasierte, Modell-unterstützte (engl. model assisted) Schätzmethoden zur Anwendung, die überwiegend auf asymptotischen Eigenschaften beruhen. Für kleinere Stichprobenumfänge, wie man sie für Small Areas (Domains bzw. Subpopulationen) antrifft, eignen sich diese Schätzmethoden eher nicht, weswegen für diese Anwendung spezielle modellbasierte Small Area-Schätzverfahren entwickelt wurden. Letztere können zwar Verzerrungen aufweisen, besitzen jedoch häufig einen kleineren mittleren quadratischen Fehler der Schätzung als dies für designbasierte Schätzer der Fall ist. Den Modell-unterstützten und modellbasierten Methoden ist gemeinsam, dass sie auf statistischen Modellen beruhen; allerdings in unterschiedlichem Ausmass. Modell-unterstützte Verfahren sind in der Regel so konstruiert, dass der Beitrag des Modells bei sehr grossen Stichprobenumfängen gering ist (bei einer Grenzwertbetrachtung sogar wegfällt). Bei modellbasierten Methoden nimmt das Modell immer eine tragende Rolle ein, unabhängig vom Stichprobenumfang. Diese Überlegungen veranschaulichen, dass das unterstellte Modell, präziser formuliert, die Güte der Modellierung für die Qualität der Small Area-Statistik von massgeblicher Bedeutung ist. Wenn es nicht gelingt, die empirischen Daten durch ein passendes Modell zu beschreiben und mit den entsprechenden Methoden zu schätzen, dann können massive Verzerrungen und / oder ineffiziente Schätzungen resultieren.
Die vorliegende Arbeit beschäftigt sich mit der zentralen Frage der Robustheit von Small Area-Schätzverfahren. Als robust werden statistische Methoden dann bezeichnet, wenn sie eine beschränkte Einflussfunktion und einen möglichst hohen Bruchpunkt haben. Vereinfacht gesprochen zeichnen sich robuste Verfahren dadurch aus, dass sie nur unwesentlich durch Ausreisser und andere Anomalien in den Daten beeinflusst werden. Die Untersuchung zur Robustheit konzentriert sich auf die folgenden Modelle bzw. Schätzmethoden:
i) modellbasierte Schätzer für das Fay-Herriot-Modell (Fay und Herrot, 1979, J. Amer. Statist. Assoc.) und das elementare Unit-Level-Modell (vgl. Battese et al., 1988, J. Amer. Statist. Assoc.).
ii) direkte, Modell-unterstützte Schätzer unter der Annahme eines linearen Regressionsmodells.
Das Unit-Level-Modell zur Mittelwertschätzung beruht auf einem linearen gemischten Gauss'schen Modell (engl. mixed linear model, MLM) mit blockdiagonaler Kovarianzmatrix. Im Gegensatz zu bspw. einem multiplen linearen Regressionsmodell, besitzen MLM-Modelle keine nennenswerten Invarianzeigenschaften, so dass eine Kontamination der abhängigen Variablen unvermeidbar zu verzerrten Parameterschätzungen führt. Für die Maximum-Likelihood-Methode kann die resultierende Verzerrung nahezu beliebig groß werden. Aus diesem Grund haben Richardson und Welsh (1995, Biometrics) die robusten Schätzmethoden RML 1 und RML 2 entwickelt, die bei kontaminierten Daten nur eine geringe Verzerrung aufweisen und wesentlich effizienter sind als die Maximum-Likelihood-Methode. Eine Abwandlung von Methode RML 2 wurde Sinha und Rao (2009, Canad. J. Statist.) für die robuste Schätzung von Unit-Level-Modellen vorgeschlagen. Allerdings erweisen sich die gebräuchlichen numerischen Verfahren zur Berechnung der RML-2-Methode (dies gilt auch für den Vorschlag von Sinha und Rao) als notorisch unzuverlässig. In dieser Arbeit werden zuerst die Konvergenzprobleme der bestehenden Verfahren erörtert und anschließend ein numerisches Verfahren vorgeschlagen, das sich durch wesentlich bessere numerische Eigenschaften auszeichnet. Schließlich wird das vorgeschlagene Schätzverfahren im Rahmen einer Simulationsstudie untersucht und anhand eines empirischen Beispiels zur Schätzung von oberirdischer Biomasse in norwegischen Kommunen illustriert.
Das Modell von Fay-Herriot kann als Spezialfall eines MLM mit blockdiagonaler Kovarianzmatrix aufgefasst werden, obwohl die Varianzen des Zufallseffekts für die Small Areas nicht geschätzt werden müssen, sondern als bereits bekannte Größen betrachtet werden. Diese Eigenschaft kann man sich nun zunutze machen, um die von Sinha und Rao (2009) vorgeschlagene Robustifizierung des Unit-Level-Modells direkt auf das Fay-Herriot Model zu übertragen. In der vorliegenden Arbeit wird jedoch ein alternativer Vorschlag erarbeitet, der von der folgenden Beobachtung ausgeht: Fay und Herriot (1979) haben ihr Modell als Verallgemeinerung des James-Stein-Schätzers motiviert, wobei sie sich einen empirischen Bayes-Ansatz zunutze machen. Wir greifen diese Motivation des Problems auf und formulieren ein analoges robustes Bayes'sches Verfahren. Wählt man nun in der robusten Bayes'schen Problemformulierung die ungünstigste Verteilung (engl. least favorable distribution) von Huber (1964, Ann. Math. Statist.) als A-priori-Verteilung für die Lokationswerte der Small Areas, dann resultiert als Bayes-Schätzer [=Schätzer mit dem kleinsten Bayes-Risk] die Limited-Translation-Rule (LTR) von Efron und Morris (1971, J. Amer. Statist. Assoc.). Im Kontext der frequentistischen Statistik kann die Limited-Translation-Rule nicht verwendet werden, weil sie (als Bayes-Schätzer) auf unbekannten Parametern beruht. Die unbekannten Parameter können jedoch nach dem empirischen Bayes-Ansatz an der Randverteilung der abhängigen Variablen geschätzt werden. Hierbei gilt es zu beachten (und dies wurde in der Literatur vernachlässigt), dass die Randverteilung unter der ungünstigsten A-priori-Verteilung nicht einer Normalverteilung entspricht, sondern durch die ungünstigste Verteilung nach Huber (1964) beschrieben wird. Es ist nun nicht weiter erstaunlich, dass es sich bei den Maximum-Likelihood-Schätzern von Regressionskoeffizienten und Modellvarianz unter der Randverteilung um M-Schätzer mit der Huber'schen psi-Funktion handelt.
Unsere theoriegeleitete Herleitung von robusten Schätzern zum Fay-Herriot-Modell zeigt auf, dass bei kontaminierten Daten die geschätzte LTR (mit Parameterschätzungen nach der M-Schätzmethodik) optimal ist und, dass die LTR ein integraler Bestandteil der Schätzmethodik ist (und nicht als ``Zusatz'' o.Ä. zu betrachten ist, wie dies andernorts getan wird). Die vorgeschlagenen M-Schätzer sind robust bei Vorliegen von atypischen Small Areas (Ausreissern), wie dies auch die Simulations- und Fallstudien zeigen. Um auch Robustheit bei Vorkommen von einflussreichen Beobachtungen in den unabhängigen Variablen zu erzielen, wurden verallgemeinerte M-Schätzer (engl. generalized M-estimator) für das Fay-Herriot-Modell entwickelt.

This doctoral thesis examines intergenerational knowledge, its antecedents as well as how participation in intergenerational knowledge transfer is related to the performance evaluation of employees. To answer these questions, this doctoral thesis builds on a literature review and quantitative research methods. A systematic literature study shows that empirical evidence on intergenerational knowledge transfer is limited. Building on prior literature, effects of various antecedents at the interpersonal and organizational level regarding their effects on intergenerational and intragenerational knowledge transfer are postulated. By questioning 444 trainees and trainers, this doctoral thesis also demonstrates that interpersonal antecedents impact how trainees participate in intergenerational knowledge transfer with their trainers. Thereby, the results of this study provide support that interpersonal antecedents are relevant for intergenerational knowledge transfer, yet, also emphasize the implications attached to the assigned roles in knowledge transfer (i.e., whether one is a trainee or trainer). Moreover, the results of an experimental vignette study reveal that participation in intergenerational knowledge transfer is linked to the performance evaluation of employees, yet, is susceptible to whether the employee is sharing or seeking knowledge. Overall, this doctoral thesis provides insights into this topic by covering a multitude of antecedents of intergenerational knowledge transfer, as well as how participation in intergenerational knowledge transfer may be associated with the performance evaluation of employees.

In order to classify smooth foliated manifolds, which are smooth maifolds equipped with a smooth foliation, we introduce the de Rham cohomologies of smooth foliated manifolds. These cohomologies are build in a similar way as the de Rham cohomologies of smooth manifolds. We develop some tools to compute these cohomologies. For example we proof a Mayer Vietoris theorem for foliated de Rham cohomology and show that these cohomologys are invariant under integrable homotopy. A generalization of a known Künneth formula, which relates the cohomologies of a product foliation with its factors, is discussed. In particular, this envolves a splitting theory of sequences between Frechet spaces and a theory of projective spectrums. We also prove, that the foliated de Rham cohomology is isomorphic to the Cech-de Rham cohomology and the Cech cohomology of leafwise constant functions of an underlying so called good cover.

Coastal erosion describes the displacement of land caused by destructive sea waves,
currents or tides. Due to the global climate change and associated phenomena such as
melting polar ice caps and changing current patterns of the oceans, which result in rising
sea levels or increased current velocities, the need for countermeasures is continuously
increasing. Today, major efforts have been made to mitigate these effects using groins,
breakwaters and various other structures.
This thesis will find a novel approach to address this problem by applying shape optimization
on the obstacles. Due to this reason, results of this thesis always contain the
following three distinct aspects:
The selected wave propagation model, i.e. the modeling of wave propagation towards
the coastline, using various wave formulations, ranging from steady to unsteady descriptions,
described from the Lagrangian or Eulerian viewpoint with all its specialties. More
precisely, in the Eulerian setting is first a steady Helmholtz equation in the form of a
scattering problem investigated and followed subsequently by shallow water equations,
in classical form, equipped with porosity, sediment portability and further subtleties.
Secondly, in a Lagrangian framework the Lagrangian shallow water equations form the
center of interest.
The chosen discretization, i.e. dependent on the nature and peculiarity of the constraining
partial differential equation, we choose between finite elements in conjunction
with a continuous Galerkin and discontinuous Galerkin method for investigations in the
Eulerian description. In addition, the Lagrangian viewpoint offers itself for mesh-free,
particle-based discretizations, where smoothed particle hydrodynamics are used.
The method for shape optimization w.r.t. the obstacle’s shape over an appropriate
cost function, constrained by the solution of the selected wave-propagation model. In
this sense, we rely on a differentiate-then-discretize approach for free-form shape optimization
in the Eulerian set-up, and reverse the order in Lagrangian computations.

The dissertation deals with methods to improve design-based and model-assisted estimation techniques for surveys in a finite population framework. The focus is on the development of the statistical methodology as well as their implementation by means of tailor-made numerical optimization strategies. In that regard, the developed methods aim at computing statistics for several potentially conflicting variables of interest at aggregated and disaggregated levels of the population on the basis of one single survey. The work can be divided into two main research questions, which are briefly explained in the following sections.
First, an optimal multivariate allocation method is developed taking into account several stratification levels. This approach results in a multi-objective optimization problem due to the simultaneous consideration of several variables of interest. In preparation for the numerical solution, several scalarization and standardization techniques are presented, which represent the different preferences of potential users. In addition, it is shown that by solving the problem scalarized with a weighted sum for all combinations of weights, the entire Pareto frontier of the original problem can be generated. By exploiting the special structure of the problem, the scalarized problems can be efficiently solved by a semismooth Newton method. In order to apply this numerical method to other scalarization techniques as well, an alternative approach is suggested, which traces the problem back to the weighted sum case. To address regional estimation quality requirements at multiple stratification levels, the potential use of upper bounds for regional variances is integrated into the method. In addition to restrictions on regional estimates, the method enables the consideration of box-constraints for the stratum-specific sample sizes, allowing minimum and maximum stratum-specific sampling fractions to be defined.
In addition to the allocation method, a generalized calibration method is developed, which is supposed to achieve coherent and efficient estimates at different stratification levels. The developed calibration method takes into account a very large number of benchmarks at different stratification levels, which may be obtained from different sources such as registers, paradata or other surveys using different estimation techniques. In order to incorporate the heterogeneous quality and the multitude of benchmarks, a relaxation of selected benchmarks is proposed. In that regard, predefined tolerances are assigned to problematic benchmarks at low aggregation levels in order to avoid an exact fulfillment. In addition, the generalized calibration method allows the use of box-constraints for the correction weights in order to avoid an extremely high variation of the weights. Furthermore, a variance estimation by means of a rescaling bootstrap is presented.
Both developed methods are analyzed and compared with existing methods in extensive simulation studies on the basis of a realistic synthetic data set of all households in Germany. Due to the similar requirements and objectives, both methods can be successively applied to a single survey in order to combine their efficiency advantages. In addition, both methods can be solved in a time-efficient manner using very comparable optimization approaches. These are based on transformations of the optimality conditions. The dimension of the resulting system of equations is ultimately independent of the dimension of the original problem, which enables the application even for very large problem instances.

In vielen Branchen und vor allem in großen Unternehmen gehört eine Unterstützung von Geschäftsprozessen durch Workﬂow-Management-Systeme zum gelebten Alltag. Im Zentrum steht dabei die Steuerung kontrollﬂussorientierter Abläufe, während Prozesse mit einem Schwerpunkt auf Daten, Informationen und Wissen meist außen vor bleiben. Solche wissensintensive Prozesse (engl.: knowledge intensive processes) (KiPs) sind Untersuchungsgegenstand in vielen aktuellen Studien, welche ein derzeit aktives Forschungsgebiet formen.
Im Vordergrund solcher KiPs steht dabei das durch die mitwirkenden Personen eingebrachte Wissen, welches in einem wesentlichen Maß die Prozessausführung beeinﬂusst, hierdurch jedoch die Bearbeitung komplexer und meist hoch volatiler Prozesse ermöglicht. Hierbei handelt es sich zumeist um entscheidungsintensive Prozesse, Prozesse zur Wissensakquisition oder Prozesse, die zu einer Vielzahl unterschiedlicher Prozessabläufe führen können.
Im Rahmen dieser Arbeit wird ein Ansatz entwickelt und vorgestellt, der sich der Modellierung, Visualisierung und Ausführung wissensintensiver Prozesse unter Verwendung Semantischer Technologien widmet. Hierzu werden als die zentralen Anforderungen zur Ausführung von KiPs Flexibilität, Adaptivität und Zielorientierung deﬁniert. Daran anknüpfend werden drei zentrale Grundprinzipien der Prozessmodellierung identiﬁziert, welche in der ersten Forschungsfrage aufgegriﬀen werden: „Können die drei Grundprinzipien in einem einheitlichen datenzentrierten, deklarativen, semantischen Ansatz (welcher mit ODD-BP bezeichnet wird) kombiniert werden und können damit die zentralen Anforderungen von KiPs erfüllt werden?”
Die Grundlage für ODD-BP bildet ein Metamodell, welches als Sprachkonstrukt fungiert und die Deﬁnition der angestrebten Prozessmodelle erlaubt. Darauf aufbauend wird mit Hilfe von Inferenzierungsregeln ein Verfahren entwickelt, welches das Schlussfolgern von Prozesszuständen ermöglicht und somit eine klassische Workﬂow-Engine überﬂüssig macht. Zudem wird eine Methodik eingeführt, die für jede in einem Prozess mitwirkende Person eine maßgeschneiderte, adaptive Prozessvisualisierung ermöglicht, um neben dem Freiheitsgrad der Flexibilität auch eine fundierte Prozessunterstützung bei der Ausführung von KiPs leisten zu können. All dies erfolgt innerhalb einer einheitlichen Wissensbasis, die zum einen die Grundlage für eine vollständige semantische Prozessmodellierung bildet und zum anderen die Möglichkeit zur Integration von Expertenwissen eröﬀnet. Dieses Expertenwissen kann einen expliziten Beitrag bei der Ausführung wissensintensiver Prozesse leisten und somit die Kollaboration von Mensch und Maschine durch Technologien der symbolischen KI ermöglichen. Die zweite Forschungsfrage greift diesen Aspekt auf: „Kann in dem ODD-BP Ansatz ontologisches Wissen so integriert werden, dass dieses in einer Prozessausführung einen Beitrag leistet?”
Das Metamodell sowie die entwickelten Methoden und Verfahren werden in einem prototypischen, generischen System realisiert, welches grundsätzlich für alle Anwendungsgebiete mit KiPs geeignet ist. Zur Validierung des ODD-BP Ansatzes erfolgt eine Ausrichtung auf den Anwendungsfall einer Notrufabfrage aus dem Leitstellenumfeld. Im Zuge der Evaluation wird gezeigt, wie dieser wissensintensive Ablauf von einer ﬂexiblen, adaptiven und zielorientierten Prozessausführung proﬁtiert. Darüber hinaus wird medizinisches Expertenwissen in den Prozessablauf integriert und es wird nachgewiesen, wie dieses zu verbesserten Prozessergebnissen beiträgt.
Wissensintensive Prozesse stellen Unternehmen und Organisationen in allen Branchen und Anwendungsfällen derzeit vor große Herausforderungen und die Wissenschaft und Forschung widmet sich der Suche nach praxistauglichen Lösungen. Diese Arbeit präsentiert mit ODD-BP einen vielversprechenden Ansatz, indem die Möglichkeiten Semantischer Technologien dazu genutzt werden, eine eng verzahnte Zusammenarbeit zwischen Mensch und Maschine bei der Ausführung von KiPs zu ermöglichen. Die zur Evaluation fokussierte Notrufabfrage innerhalb von Leitstellen stellt zudem einen höchst relevanten Anwendungsfall dar, da in einem akuten Notfall in kürzester Zeit Entscheidungen getroﬀen werden müssen, um weitreichenden Schaden abwenden und Leben retten zu können. Durch die Berücksichtigung umfassender Datenmengen und das Ausnutzen verfügbaren Expertenwissens kann so eine schnelle Lagebewertung mit Hilfe der maschinellen Unterstützung erreicht und der Mensch beim Treﬀen von richtigen Entscheidungen unterstützt werden.

Entrepreneurship has become an essential phenomenon all over the world because it is a major driving force behind the economic growth and development of a country. It is widely accepted that entrepreneurship development in a country creates new jobs, pro-motes healthy competition through innovation, and benefits the social well being of individuals and societies. The policymakers in both developed and developing countries focus on entrepreneurship because it helps to alleviate impediments to economic development and social welfare. Therefore, policymakers and academic researchers consider the promotion of entrepreneurship as essential for the economy and research-based support is needed for further development of entrepreneurship activities.
The impact of entrepreneurial activities on economic and social development also varies from country to country. The effect of entrepreneurial activities on economic and social development also varies from country to country because the level of entrepreneur-ship activities also varies from one region to another or one country to another. To under-stand these variations, policymakers have investigated the determinants of entrepreneur-ship at different levels, such as the individual, industry, and country levels. Moreover, entrepreneurship behavior is influenced by various personal and environmental level factors. However, these personal-level factors cannot be separated from the surrounding environment.
The link between religion and entrepreneurship is well established and can be traced back to Weber (1930). Researchers have analyzed the relationship between religion and entrepreneurship from various perspectives, and the research related to religion and entrepreneurship is diversified and scattered across disciplines. This dissertation tries to explain the link between religion and entrepreneurship, specifically Islamic religion and entrepreneurship. Technically this dissertation comprises three parts. The first part of this dissertation consists of two chapters that discuss the definition and theories of entrepreneurship (Chapter 2) and the theoretical relationship between religion and entrepreneur-ship (Chapter 3).
The second part of this dissertation (Chapter 4) provides an overview of the field with a purpose to gain a better understanding of the field’s current state of knowledge to bridge the different views and perspectives. In order to provide an overview of the field, a systematic literature search leading to a descriptive overview of the field based on 270 articles published in 163 journals Subsequently, bibliometric methods are used to identify thematic clusters, the most influential authors and articles, and how they are connected.
The third part of this dissertation (Chapter 5) empirically evaluates the influence of Islamic values and Islamic religious practices on entrepreneurship intentions within the Islamic community. Using the theory of planned behavior as a theoretical lens, we also take into account that the relationship between religion and entrepreneurial intentions can be mediated by individual’s attitude towards entrepreneurship. A self-administrative questionnaire was used to collect the responses from a sample of 1895 Pakistani university students. A structured equation modeling was adopted to perform a nuanced assessment of the relationship between Islamic values and practices and entrepreneurship intentions and to account for mediating effect of attitude towards entrepreneurship.
The research on religion and entrepreneurship has increased sharply during the last years and is scattered across various academic disciplines and fields. The analysis identifies and characterize the most important publications, journals, and authors in the area and map the analyzed religions and regions. The comprehensive overview of previous studies allows us to identify research gaps and derive avenues for future research in a substantiated way. Moreover, this dissertation helps the research scholars to understand the field in its entirety, identify relevant articles, and to uncover parallels and differences across religions and regions. Besides, the study reveals a lack of empirical research related to specific religions and specific regions. Therefore, scholars can take these regions and religions into consideration when conducting empirical research.
Furthermore, the empirical analysis about the influence of Islamic religious values and Islamic religious practices show that Islamic values served as a guiding principle in shaping people’s attitudes towards entrepreneurship in an Islamic community; they had an indirect influence on entrepreneurship intention through attitude. Similarly, the relationship between Islamic religious practices and the entrepreneurship intentions of students was fully mediated by the attitude towards entrepreneurship. Furthermore, this dissertation contributes to prior research on entrepreneurship in Islamic communities by applying a more fine-grained approach to capture the link between religion and entrepreneurship. Moreover, it contributes to the literature on entrepreneurship intentions by showing that the influence of religion on entrepreneurship intentions is mainly due to religious values and practices, which shape the attitude towards entrepreneurship and thereby influence entrepreneurship intentions in religious communities. The entrepreneur-ship research has put a higher emphasis on assessing the influence of a diverse set of con-textual factors. This dissertation introduces Islamic values and Islamic religious practices as critical contextual factors that shape entrepreneurship in countries that are characterized by the Islamic religion.

This thesis sheds light on the heterogeneous hedging behavior of airlines. The focus lies on ﬁnancial hedging, operational hedging and selective hedging. The unbalanced panel data set includes 74 airlines from 39 countries. The period of analysis is 2005 until 2014, resulting in 621 ﬁrm years. The random effects probit and ﬁxed effects OLS models provide strong evidence of a convex relation between derivative usage and a ﬁrm’s leverage, opposing the existing ﬁnancial distress theory. Airlines with lower leverage had higher hedge ratios. In addition, the results show that airlines with interest rate and currency derivatives were more likely to engage in fuel price hedging. Moreover, the study results support the argument that operational hedging is a complement to ﬁnancial hedging. Airlines with more heterogeneous ﬂeet structures exhibited higher hedge ratios.
Also, airlines which were members of a strategic alliance were more likely to be hedging airlines. As alliance airlines are rather ﬁnancially sound airlines, the positive relation between alliance membership and hedging reﬂects the negative results on the leverage
ratio. Lastly, the study presents determinants of an airlines’ selective hedging behavior. Airlines with prior-period derivative losses, recognized in income, changed their hedge portfolios more frequently. Moreover, the sample airlines acted in accordance with herd behavior theory. Changes in the regional hedge portfolios inﬂuenced the hedge portfolio of the individual airline in the same direction.

Many NP-hard optimization problems that originate from classical graph theory, such as the maximum stable set problem and the maximum clique problem, have been extensively studied over the past decades and involve the choice of a subset of edges or vertices. There usually exist combinatorial methods that can be applied to solve them directly in the graph.
The most simple method is to enumerate feasible solutions and select the best. It is not surprising that this method is very slow oftentimes, so the task is to cleverly discard fruitless search space during the search. An alternative method to solve graph problems is to formulate integer linear programs, such that their solution yields an optimal solution to the original optimization problem in the graph. In order to solve integer linear programs, one can start with relaxing the integer constraints and then try to find inequalities for cutting off fractional extreme points. In the best case, it would be possible to describe the convex hull of the feasible region of the integer linear program with a set of inequalities. In general, giving a complete description of this convex hull is out of reach, even if it has a polynomial number of facets. Thus, one tries to strengthen the (weak) relaxation of the integer linear program best possible via strong inequalities that are valid for the convex hull of feasible integer points.
Many classes of valid inequalities are of exponential size. For instance, a graph can have exponentially many odd cycles in general and therefore the number of odd cycle inequalities for the maximum stable set problem is exponential. It is sometimes possible to check in polynomial time if some given point violates any of the exponentially many inequalities. This is indeed the case for the odd cycle inequalities for the maximum stable set problem. If a polynomial time separation algorithm is known, there exists a formulation of polynomial size that contains a given point if and only if it does not violate one of the (potentially exponentially many) inequalities. This thesis can be divided into two parts. The first part is the main part and it contains various new results. We present new extended formulations for several optimization problems, i.e. the maximum stable set problem, the nonconvex quadratic program with box
constraints and the p-median problem. In the second part we modify a very fast algorithm for finding a maximum clique in very large sparse graphs. We suggest and compare three alternative versions of this algorithm to the original version and compare their strengths and weaknesses.

The formerly communist countries in Central and Eastern Europe (transitional economies in Europe and the Soviet Union – for example, East Germany, Czech Republic, Hungary, Lithuania, Poland, Russia) and transitional economies in Asia – for example, China, Vietnam had centrally planned economies, which did not allow entrepreneurship activities. Despite the political-socioeconomic transformations in transitional economies around 1989, they still had an institutional heritage that affects individuals’ values and attitudes, which, in turn, influence intentions, behaviors, and actions, including entrepreneurship.
While prior studies on the long-lasting effects of socialist legacy on entrepreneurship have focused on limited geographical regions (e.g., East-West Germany, and East-West Europe), this dissertation focuses on the Vietnamese context, which offers a unique quasi-experimental setting. In 1954, Vietnam was divided into the socialist North and the non-socialist South, and it was then reunified under socialist rule in 1975. Thus, the intensity of differences in socialist treatment in North-South Vietnam (about 21 years) is much shorter than that in East-West Germany (about 40 years) and East-West Europe (about 70 years when considering former Soviet Union countries).
To assess the relationship between socialist history and entrepreneurship in this unique setting, we survey more than 3,000 Vietnamese individuals. This thesis finds that individuals from North Vietnam have lower entrepreneurship intentions, are less likely to enroll in entrepreneurship education programs, and display lower likelihood to take over an existing business, compared to those from the South of Vietnam. The long-lasting effect of formerly socialist institutions on entrepreneurship is apparently deeper than previously discovered in the prominent case of East-West Germany and East-West Europe as well.
In the second empirical investigation, this dissertation focuses on how succession intentions differ from others (e.g., founding, and employee intentions) regarding career choice motivation, and the effect of three main elements of the theory of planned behavior (e.g., entrepreneurial attitude, subjective norms, and perceived behavioral control) in transition economy – Vietnam context. The findings of this thesis suggest that an intentional founder is labeled with innovation, an intentional successor is labeled with roles motivation, and an intentional employee is labeled with social mission. Additionally, this thesis reveals that entrepreneurial attitude and perceived behavioral control are positively associated with the founding intention, whereas there is no difference in this effect between succession and employee intentions.

The harmonic Faber operator
(2018)

P. K. Suetin points out in the beginning of his monograph "Faber Polynomials and Faber Series" that Faber polynomials play an important role in modern approximation theory of a complex variable as they are used in representing analytic functions in simply connected domains, and many theorems on approximation of analytic functions are proved with their help [50]. In 1903, the Faber polynomials were firstly discovered by G. Faber. It was Faber's aim to find a generalisation of Taylor series of holomorphic functions in the open unit disc D in the following way. As any holomorphic function in D has a Taylor series representation f(z)=\sum_{\nu=0}^{\infty}a_{\nu}z^{\nu} (z\in\D) converging locally uniformly inside D, for a simply connected domain G, Faber wanted to determine a system of polynomials (Q_n) such that each function f being holomorphic in G can be expanded into a series
f=\sum_{\nu=0}^{\infty}b_{\nu}Q_{\nu} converging locally uniformly inside G. Having this goal in mind, Faber considered simply connected domains bounded by an analytic Jordan curve. He constructed a system of polynomials (F_n) with this property. These polynomials F_n were named after him as Faber polynomials. In the preface of [50], a detailed summary of results concerning Faber polynomials and results obtained by the aid of them is given. An important application of Faber polynomials is e.g. the transfer of known assertions concerning polynomial approximation of functions belonging to the disc algebra to results of the approximation of functions being continuous on a compact continuum K which contains at least two points and has a connected complement and being holomorphic in the interior of K. In this field, the Faber operator denoted by T turns out to be a powerful tool (for an introduction, see e.g. D. Gaier's monograph). It
assigns a polynomial of degree at most n given in the monomial basis \sum_{\nu=0}^{n}a_{\nu}z^{\nu} with a polynomial of degree at most n given in the basis of Faber polynomials \sum_{\nu=0}^{n}a_{\nu}F_{\nu}. If the Faber operator is continuous with respect to the uniform norms, it has a unique continuous extension to an operator mapping the disc algebra onto the space of functions being continuous on the whole compact continuum and holomorphic in its interior. For all f being element of the disc algebra and all polynomials P, via the obvious estimate for the uniform norms ||T(f)-T(P)||<= ||T|| ||f-P||, it can be seen that the original task of approximating F=T(f) by polynomials is reduced to the polynomial approximation of the function f. Therefore, the question arises under which conditions the Faber operator is continuous and surjective. A fundamental result in this regard was established by J. M. Anderson and J. Clunie who showed that if the compact continuum is bounded by a rectifiable Jordan curve with bounded boundary rotation and free from cusps, then the Faber operator with respect to the uniform norms is a topological isomorphism. Now, let f be a harmonic function in D. Similar as above, we find that f has a uniquely determined representation f=\sum_{\nu=-\infty}^{\infty}a_{\nu}p_{\nu}
converging locally uniformly inside D where p_{n}(z)=z^{n} for n\in\N_{0} and p_{-n}(z)=\overline{z}^{n} for n\in\N}. One may ask whether there is an analogue for harmonic functions on simply connected domains G. Indeed, for a domain G bounded by an analytic Jordan curve, the conjecture that each function f being harmonic in G has a uniquely determined representation f=\sum_{\nu= \infty}^{\infty}b_{\nu}F_{\nu} where F_{-n}(z)=\overline{F_{n}(z\)} for n\inN, converging locally uniformly inside G, holds true. Let now K be a compact continuum containing at least two points and having a connected complement. A main component of this thesis will be the examination of the harmonic Faber operator mapping a harmonic polynomial given in the basis of the harmonic monomials \sum_{\nu=-n}^{n}a_{\nu}p_{\nu} to a harmonic polynomial given as \sum_{\nu=-n}^{n}a_{\nu}F_{\nu}.
If this operator, which is based on an idea of J. Müller, is continuous with respect to the uniform norms, it has a unique continuous extension to an operator mapping the functions being continuous on \partial\D onto the continuous functions on K being
harmonic in the interior of K. Harmonic Faber polynomials and the harmonic Faber operator will be the objects accompanying us throughout
our whole discussion. After having given an overview about notations and certain tools we will use in our consideration in the first chapter, we begin our studies with an introduction to the Faber operator and the harmonic Faber operator. We start modestly and consider domains bounded by an analytic Jordan curve. In Section 2, as a first result, we will show that, for such a domain G, the harmonic Faber operator has a unique continuous extension to an operator mapping the space of the harmonic functions in D onto the space
of the harmonic functions in G, and moreover, the harmonic Faber
operator is an isomorphism with respect to the topologies of locally
uniform convergence. In the further sections of this chapter, we illumine the behaviour of the (harmonic) Faber operator on certain function spaces. In the third chapter, we leave the situation of compact continua bounded by an analytic Jordan curve. Instead we consider closures of domains bounded by Jordan curves having a Dini continuous curvature. With the aid of the concept of compact operators and the Fredholm alternative, we are able to show that the harmonic Faber operator is a topological isomorphism. Since, in particular, the main result of the third chapter holds true for closures K of domains bounded by analytic Jordan curves, we can make use of it to obtain new results concerning the approximation of functions being continuous on K and harmonic in the interior of K by harmonic polynomials. To do so, we develop techniques applied by L. Frerick and J. Müller in [11] and adjust them to our setting. So, we can transfer results about the classic Faber operator to the harmonic Faber operator. In the last chapter, we will use the theory of harmonic Faber polynomials
to solve certain Dirichlet problems in the complex plane. We pursue
two different approaches: First, with a similar philosophy as in [50],
we develop a procedure to compute the coefficients of a series \sum_{\nu=-\infty}^{\infty}c_{\nu}F_{\nu} converging uniformly to the solution of a given Dirichlet problem. Later, we will point out how semi-infinite programming with harmonic Faber polynomials as ansatz functions can be used to get an approximate solution of a given Dirichlet problem. We cover both approaches first from a theoretical point of view before we have a focus on the numerical implementation of concrete examples. As application of the numerical computations, we considerably obtain visualisations of the concerned Dirichlet problems rounding out our discussion about the harmonic Faber polynomials and the harmonic Faber operator.

Despite significant advances in terms of the adoption of formal Intellectual Property Rights (IPR) protection, enforcement of and compliance with IPR regulations remains a contested issue in one of the world's major contemporary economies—China. The present review seeks to offer insights into possible reasons for this discrepancy as well as possible paths of future development by reviewing prior literature on IPR in China. Specifically, it focuses on the public's perspective, which is a crucial determinant of the effectiveness of any IPR regime. It uncovers possible differences with public perspectives in other countries and points to mechanisms (e.g., political, economic, cultural, and institutional) that may foster transitions over time in both formal IPR regulation and in the public perception of and compliance with IPR in China. On this basis, the review advances suggestions for future research in order to improve scholars' understanding of the public's perspective of IPR in China, its antecedents and implications.

This dissertation investigates corporate acquisition decisions that represent important corporate development activities for family and non-family firms. The main research objective of this dissertation is to generate insights into the subjective decision-making behavior of corporate decision-makers from family and non-family firms and their weighting of M&A decision-criteria during the early pre-acquisition target screening and selection process. The main methodology chosen for the investigation of M&A decision-making preferences and the weighting of M&A decision criteria is a choice-based conjoint analysis. The overall sample of this dissertation consists of 304 decision-makers from 264 private and public family and non-family firms from mainly Germany and the DACH-region. In the first empirical part of the dissertation, the relative importance of strategic, organizational and financial M&A decision-criteria for corporate acquirers in acquisition target screening is investigated. In addition, the author uses a cluster analysis to explore whether distinct decision-making patterns exist in acquisition target screening. In the second empirical part, the dissertation explores whether there are differences in investment preferences in acquisition target screening between family and non-family firms and within the group of family firms. With regards to the heterogeneity of family firms, the dissertation generated insights into how family-firm specific characteristics like family management, the generational stage of the firm and non-economic goals such as transgenerational control intention influences the weighting of different M&A decision criteria in acquisition target screening. The dissertation contributes to strategic management research, in specific to M&A literature, and to family business research. The results of this dissertation generate insights into the weighting of M&A decision-making criteria and facilitate a better understanding of corporate M&A decisions in family and non-family firms. The findings show that decision-making preferences (hence the weighting of M&A decision criteria) are influenced by characteristics of the individual decision-maker, the firm and the environment in which the firm operates.

Official business surveys form the basis for national and regional business statistics and are thus of great importance for analysing the state and performance of the economy. However, both the heterogeneity of business data and their high dynamics pose a particular challenge to the feasibility of sampling and the quality of the resulting estimates. A widely used sampling frame for creating the design of an official business survey is an extract from an official business register. However, if this frame does not accurately represent the target population, frame errors arise. Amplified by the heterogeneity and dynamics of business populations, these errors can significantly affect the estimation quality and lead to inefficiencies and biases. This dissertation therefore deals with design-based methods for optimising business surveys with respect to different types of frame errors.
First, methods for adjusting the sampling design of business surveys are addressed. These approaches integrate auxiliary information about the expected structures of frame errors into the sampling design. The aim is to increase the number of sampled businesses that are subject to frame errors. The element-specific frame error probability is estimated based on auxiliary information about frame errors observed in previous samples. The approaches discussed consider different types of frame errors and can be incorporated into predefined designs with fixed strata.
As the second main pillar of this work, methods for adjusting weights to correct for frame errors during estimation are developed and investigated. As a result of frame errors, the assumptions under which the original design weights were determined based on the sampling design no longer hold. The developed methods correct the design weights taking into account the errors identified for sampled elements. Case-number-based reweighting approaches, on the one hand, attempt to reconstruct the unknown size of the individual strata in the target population. In the context of weight smoothing methods, on the other hand, design weights are modelled and smoothed as a function of target or auxiliary variables. This serves to avoid inefficiencies in the estimation due to highly scattering weights or weak correlations between weights and target variables. In addition, possibilities of correcting frame errors by calibration weighting are elaborated. Especially when the sampling frame shows over- and/or undercoverage, the inclusion of external auxiliary information can provide a significant improvement of the estimation quality. For those methods whose quality cannot be measured using standard procedures, a procedure for estimating the variance based on a rescaling bootstrap is proposed. This enables an assessment of the estimation quality when using the methods in practice.
In the context of two extensive simulation studies, the methods presented in this dissertation are evaluated and compared with each other. First, in the environment of an experimental simulation, it is assessed which approaches are particularly suitable with regard to different data situations. In a second simulation study, which is based on the structural survey in the services sector, the applicability of the methods in practice is evaluated under realistic conditions.

In common shape optimization routines, deformations of the computational mesh
usually suffer from decrease of mesh quality or even destruction of the mesh.
To mitigate this, we propose a theoretical framework using so-called pre-shape
spaces. This gives an opportunity for a unified theory of shape optimization, and of
problems related to parameterization and mesh quality. With this, we stay in the
free-form approach of shape optimization, in contrast to parameterized approaches
that limit possible shapes. The concept of pre-shape derivatives is defined, and
according structure and calculus theorems are derived, which generalize classical
shape optimization and its calculus. Tangential and normal directions are featured
in pre-shape derivatives, in contrast to classical shape derivatives featuring only
normal directions on shapes. Techniques from classical shape optimization and
calculus are shown to carry over to this framework, and are collected in generality
for future reference.
A pre-shape parameterization tracking problem class for mesh quality is in-
troduced, which is solvable by use of pre-shape derivatives. This class allows for
non-uniform user prescribed adaptations of the shape and hold-all domain meshes.
It acts as a regularizer for classical shape objectives. Existence of regularized solu-
tions is guaranteed, and corresponding optimal pre-shapes are shown to correspond
to optimal shapes of the original problem, which additionally achieve the user pre-
scribed parameterization.
We present shape gradient system modifications, which allow simultaneous nu-
merical shape optimization with mesh quality improvement. Further, consistency
of modified pre-shape gradient systems is established. The computational burden
of our approach is limited, since additional solution of possibly larger (non-)linear
systems for regularized shape gradients is not necessary. We implement and com-
pare these pre-shape gradient regularization approaches for a 2D problem, which
is prone to mesh degeneration. As our approach does not depend on the choice of
forms to represent shape gradients, we employ and compare weak linear elasticity
and weak quasilinear p-Laplacian pre-shape gradient representations.
We also introduce a Quasi-Newton-ADM inspired algorithm for mesh quality,
which guarantees sufficient adaption of meshes to user specification during the rou-
tines. It is applicable in addition to simultaneous mesh regularization techniques.
Unrelated to mesh regularization techniques, we consider shape optimization
problems constrained by elliptic variational inequalities of the first kind, so-called
obstacle-type problems. In general, standard necessary optimality conditions cannot
be formulated in a straightforward manner for such semi-smooth shape optimization
problems. Under appropriate assumptions, we prove existence and convergence of
adjoints for smooth regularizations of the VI-constraint. Moreover, we derive shape
derivatives for the regularized problem and prove convergence to a limit object.
Based on this analysis, an efficient optimization algorithm is devised and tested
numerically.
All previous pre-shape regularization techniques are applied to a variational
inequality constrained shape optimization problem, where we also create customized
targets for increased mesh adaptation of changing embedded shapes and active set
boundaries of the constraining variational inequality.

Computer simulation has become established in a two-fold way: As a tool for planning, analyzing, and optimizing complex systems but also as a method for the scientific instigation of theories and thus for the generation of knowledge. Generated results often serve as a basis for investment decisions, e.g., road construction and factory planning, or provide evidence for scientific theory-building processes. To ensure the generation of credible and reproducible results, it is indispensable to conduct systematic and methodologically sound simulation studies. A variety of procedure models exist that structure and predetermine the process of a study. As a result, experimenters are often required to repetitively but thoroughly carry out a large number of experiments. Moreover, the process is not sufficiently specified and many important design decisions still have to be made by the experimenter, which might result in an unintentional bias of the results.
To facilitate the conducting of simulation studies and to improve both replicability and reproducibility of the generated results, this thesis proposes a procedure model for carrying out Hypothesis-Driven Simulation Studies, an approach that assists the experimenter during the design, execution, and analysis of simulation experiments. In contrast to existing approaches, a formally specified hypothesis becomes the key element of the study so that each step of the study can be adapted and executed to directly contribute to the verification of the hypothesis. To this end, the FITS language is presented, which enables the specification of hypotheses as assumptions regarding the influence specific input values have on the observable behavior of the model. The proposed procedure model systematically designs relevant simulation experiments, runs, and iterations that must be executed to provide evidence for the verification of the hypothesis. Generated outputs are then aggregated for each defined performance measure to allow for the application of statistical hypothesis testing approaches. Hence, the proposed assistance only requires the experimenter to provide an executable simulation model and a corresponding hypothesis to conduct a sound simulation study. With respect to the implementation of the proposed assistance system, this thesis presents an abstract architecture and provides formal specifications of all required services.
To evaluate the concept of Hypothesis-Driven Simulation Studies, two case studies are presented from the manufacturing domain. The introduced approach is applied to a NetLogo simulation model of a four-tiered supply chain. Two scenarios as well as corresponding assumptions about the model behavior are presented to investigate conditions for the occurrence of the bullwhip effect. Starting from the formal specification of the hypothesis, each step of a Hypothesis-Driven Simulation Study is presented in detail, with specific design decisions outlined, and generated inter- mediate data as well as final results illustrated. With respect to the comparability of the results, a conventional simulation study is conducted which serves as reference data. The approach that is proposed in this thesis is beneficial for both practitioners and scientists. The presented assistance system allows for a more effortless and simplified execution of simulation experiments while the efficient generation of credible results is ensured.

This work deals with the current support landscape for Social Entrepreneurship (SE) in the DACH region. It provides answers to the questions of which actors support SE, how and why they do so, and which social ventures are supported. In addition, there is a focus on the motives for supporting SE as well as the decision-making process while selecting social ventures. In both cases, it is examined whether certain characteristics of the decision-maker and the organization influence the weighting of motives and decision-making criteria. More precise, the gender of the decision-maker as well as the kind of support by the organization is analyzed. The concrete examples of foundations and venture philanthropy organizations (VPOs) will give a deeper look at the SE support motives and decision-making behavior. In a quantitative empirical data collection, by means of an online survey, decision-makers from SE supporting organizations in the DACH region were asked to participate in a conjoint experiment and to fill in a questionnaire. The results illustrate a positive development of the SE support landscape in the German-speaking area as well as the heterogeneity of the organizational types, the financial and non-financial support instruments and the supported social ventures. Regarding the motives for SE-support, a general endeavor to change and to create an impact has proven to be particularly important at the organizational and the individual level. At the individual level female and male decision-makers have subtle differences in their motives to promote SE. Robustness checks by analyzing certain subsamples provide information about that. Individuals from foundations and VPOs, on the other hand, hardly differ from each other, even though here individuals with a rather social background face individuals with a business background. At the organizational level crucial differences can be identified for the motives, depending on the nature of the organization's support, and again comparing foundations with VPOs. Especially for the motives 'financial interests', 'reputation' and 'employee development' there are big differences between the considered groups. Eventually, by means of cluster analysis and still with respect to the support motives, two types of decision-makers could be determined on both the individual and the organizational level.
In terms of the decision-making behavior, and the weighting of certain decision-making criteria respectively, it has emerged that it is worthwhile having a closer look: The 'importance of the social problem' and the 'authenticity of the start-up team' are consistently the two most important criteria when it comes to selecting social ventures for supporting them. However, comparing male and female decision-makers, foundations and VPOs, as well as the two groups of financially and non-financially supporting organizations, there are certain specifics which are highly relevant for SE practice. Here as well a cluster analysis uncovered patterns of criteria weighting by identifying three different types of decision-makers.

Modellbildung und Umsetzung von Methoden zur energieeffizienten Nutzung von Containertechnologien
(2021)

Die Nutzung von Cloud-Software und skalierten Web-Apps sowie Web-Services hat in den letzten Jahren extrem zugenommen, was zu einem Anstieg der Hochleistungs-Cloud-Rechenzentren führt. Neben der Verbesserung der Dienste spiegelt sich dies auch im weltweiten Stromverbrauch von Rechenzentren wider, der derzeit etwas mehr als 1% (entspricht etwa 200 TWh) beträgt. Prognosen sagen für die kommenden Jahre einen massiven Anstieg des Stromverbrauchs von Cloud-Rechenzentren voraus. Grundlage dieser Bewegung ist die Beschleunigung von Administration und Entwicklung, die unter anderem durch den Einsatz von Containern entsteht. Als Basis für Millionen von Web-Apps und -Services beschleunigen sie die Skalierung, Bereitstellung und Aktualisierung von Cloud-Diensten.
In dieser Arbeit wird aufgezeigt, dass Container zusätzlich zu ihren vielen technischen Vorteilen Möglichkeiten zur Reduzierung des Energieverbrauchs von Cloud-Rechenzentren bieten, die aus
einer ineffizienten Konfiguration von Containern sowie Container-Laufzeitumgebungen resultieren. Basierend auf einer Umfrage und einer Auswertung geeigneter Literatur werden in einem ersten Schritt wahrscheinliche Probleme beim Einsatz von Containern aufgedeckt. Weiterhin wird die Sensibilität von Administratoren und Entwicklern bezüglich des Energieverbrauchs von Container-Software ermittelt. Aufbauend auf den Ergebnissen der Umfrage und der Auswertung werden anhand von Standardszenarien im Containerumfeld die Komponenten des de facto Standards Docker untersucht. Anschließend wird ein Modell, bestehend aus Messmethodik, Empfehlungen für eine effiziente
Konfiguration von Containern und Tools, beschrieben. Die Messmethodik sollte einfach anwendbar sein und gängige Technologien in Rechenzentren unterstützen. Darüber hinaus geben die Handlungsempfehlungen sowohl Entwicklern als auch Administratoren die Möglichkeit zu entscheiden, welche Komponenten von Docker im Sinne eines energieeffizienten Einsatzes und in Abhängigkeit vom Einsatzszenario der Container genutzt werden sollten und welche weggelassen werden könnten. Die resultierenden Container können im Sinne der Energieeffizienz auf Servern und gleichermaßen auf PCs und Embedded Systems (als Teil von IoT und Edge Cloud) eingesetzt werden und somit nicht nur dem zuvor beschriebenen Problem in der Cloud entgegenwirken.
Die Arbeit beschäftigt sich zudem mit dem Verhalten von skalierten Webanwendungen. Gängige Orchestrierungswerkzeuge definieren statische Skalierungspunkte für Anwendungen, die in den meisten Fällen auf der CPU-Auslastung basieren. Es wird dargestellt, dass dabei weder die tatsächliche Erreichbarkeit noch der Stromverbrauch der Anwendungen berücksichtigt werden. Es wird der Autoscaler des Open-Source-Container-Orchestrierungswerkzeugs Kubernetes betrachtet, der um ein neu entwickeltes Werkzeug erweitert wird. Es wird deutlich, dass eine dynamische Anpassung der Skalierungspunkte durch eine Vorabauswertung gängiger Nutzungsszenarien sowie Informationen über deren Stromverbrauch und die Erreichbarkeit bei steigender Last erreicht werden kann.
Schließlich folgt eine empirische Untersuchung des generierten Modells in Form von drei Simulationen, die die Auswirkungen auf den Energieverbrauch von Cloud-Rechenzentren darlegen sollen.

We consider a linear regression model for which we assume that some of the observed variables are irrelevant for the prediction. Including the wrong variables in the statistical model can either lead to the problem of having too little information to properly estimate the statistic of interest, or having too much information and consequently describing fictitious connections. This thesis considers discrete optimization to conduct a variable selection. In light of this, the subset selection regression method is analyzed. The approach gained a lot of interest in recent years due to its promising predictive performance. A major challenge associated with the subset selection regression is the computational difficulty. In this thesis, we propose several improvements for the efficiency of the method. Novel bounds on the coefficients of the subset selection regression are developed, which help to tighten the relaxation of the associated mixed-integer program, which relies on a Big-M formulation. Moreover, a novel mixed-integer linear formulation for the subset selection regression based on a bilevel optimization reformulation is proposed. Finally, it is shown that the perspective formulation of the subset selection regression is equivalent to a state-of-the-art binary formulation. We use this insight to develop novel bounds for the subset selection regression problem, which show to be highly effective in combination with the proposed linear formulation.
In the second part of this thesis, we examine the statistical conception of the subset selection regression and conclude that it is misaligned with its intention. The subset selection regression uses the training error to decide on which variables to select. The approach conducts the validation on the training data, which oftentimes is not a good estimate of the prediction error. Hence, it requires a predetermined cardinality bound. Instead, we propose to select variables with respect to the cross-validation value. The process is formulated as a mixed-integer program with the sparsity becoming subject of the optimization. Usually, a cross-validation is used to select the best model out of a few options. With the proposed program the best model out of all possible models is selected. Since the cross-validation is a much better estimate of the prediction error, the model can select the best sparsity itself.
The thesis is concluded with an extensive simulation study which provides evidence that discrete optimization can be used to produce highly valuable predictive models with the cross-validation subset selection regression almost always producing the best results.

Die vorgelegte Dissertation trägt den Titel Regularization Methods for Statistical Modelling in Small Area Estimation. In ihr wird die Verwendung regularisierter Regressionstechniken zur geographisch oder kontextuell hochauflösenden Schätzung aggregatspezifischer Kennzahlen auf Basis kleiner Stichproben studiert. Letzteres wird in der Fachliteratur häufig unter dem Begriff Small Area Estimation betrachtet. Der Kern der Arbeit besteht darin die Effekte von regularisierter Parameterschätzung in Regressionsmodellen, welche gängiger Weise für Small Area Estimation verwendet werden, zu analysieren. Dabei erfolgt die Analyse primär auf theoretischer Ebene, indem die statistischen Eigenschaften dieser Schätzverfahren mathematisch charakterisiert und bewiesen werden. Darüber hinaus werden die Ergebnisse durch numerische Simulationen veranschaulicht, und vor dem Hintergrund empirischer Anwendungen kritisch verortet. Die Dissertation ist in drei Bereiche gegliedert. Jeder Bereich behandelt ein individuelles methodisches Problem im Kontext von Small Area Estimation, welches durch die Verwendung regularisierter Schätzverfahren gelöst werden kann. Im Folgenden wird jedes Problem kurz vorgestellt und im Zuge dessen der Nutzen von Regularisierung erläutert.
Das erste Problem ist Small Area Estimation in der Gegenwart unbeobachteter Messfehler. In Regressionsmodellen werden typischerweise endogene Variablen auf Basis statistisch verwandter exogener Variablen beschrieben. Für eine solche Beschreibung wird ein funktionaler Zusammenhang zwischen den Variablen postuliert, welcher durch ein Set von Modellparametern charakterisiert ist. Dieses Set muss auf Basis von beobachteten Realisationen der jeweiligen Variablen geschätzt werden. Sind die Beobachtungen jedoch durch Messfehler verfälscht, dann liefert der Schätzprozess verzerrte Ergebnisse. Wird anschließend Small Area Estimation betrieben, so sind die geschätzten Kennzahlen nicht verlässlich. In der Fachliteratur existieren hierfür methodische Anpassungen, welche in der Regel aber restriktive Annahmen hinsichtlich der Messfehlerverteilung benötigen. Im Rahmen der Dissertation wird bewiesen, dass Regularisierung in diesem Kontext einer gegen Messfehler robusten Schätzung entspricht - und zwar ungeachtet der Messfehlerverteilung. Diese Äquivalenz wird anschließend verwendet, um robuste Varianten bekannter Small Area Modelle herzuleiten. Für jedes Modell wird ein Algorithmus zur robusten Parameterschätzung konstruiert. Darüber hinaus wird ein neuer Ansatz entwickelt, welcher die Unsicherheit von Small Area Schätzwerten in der Gegenwart unbeobachteter Messfehler quantifiziert. Es wird zusätzlich gezeigt, dass diese Form der robusten Schätzung die wünschenswerte Eigenschaft der statistischen Konsistenz aufweist.
Das zweite Problem ist Small Area Estimation anhand von Datensätzen, welche Hilfsvariablen mit unterschiedlicher Auflösung enthalten. Regressionsmodelle für Small Area Estimation werden normalerweise entweder für personenbezogene Beobachtungen (Unit-Level), oder für aggregatsbezogene Beobachtungen (Area-Level) spezifiziert. Doch vor dem Hintergrund der stetig wachsenden Datenverfügbarkeit gibt es immer häufiger Situationen, in welchen Daten auf beiden Ebenen vorliegen. Dies beinhaltet ein großes Potenzial für Small Area Estimation, da somit neue Multi-Level Modelle mit großem Erklärungsgehalt konstruiert werden können. Allerdings ist die Verbindung der Ebenen aus methodischer Sicht kompliziert. Zentrale Schritte des Inferenzschlusses, wie etwa Variablenselektion und Parameterschätzung, müssen auf beiden Levels gleichzeitig durchgeführt werden. Hierfür existieren in der Fachliteratur kaum allgemein anwendbare Methoden. In der Dissertation wird gezeigt, dass die Verwendung ebenenspezifischer Regularisierungsterme in der Modellierung diese Probleme löst. Es wird ein neuer Algorithmus für stochastischen Gradientenabstieg zur Parameterschätzung entwickelt, welcher die Informationen von allen Ebenen effizient unter adaptiver Regularisierung nutzt. Darüber hinaus werden parametrische Verfahren zur Abschätzung der Unsicherheit für Schätzwerte vorgestellt, welche durch dieses Verfahren erzeugt wurden. Daran anknüpfend wird bewiesen, dass der entwickelte Ansatz bei adäquatem Regularisierungsterm sowohl in der Schätzung als auch in der Variablenselektion konsistent ist.
Das dritte Problem ist Small Area Estimation von Anteilswerten unter starken verteilungsbezogenen Abhängigkeiten innerhalb der Kovariaten. Solche Abhängigkeiten liegen vor, wenn eine exogene Variable durch eine lineare Transformation einer anderen exogenen Variablen darstellbar ist (Multikollinearität). In der Fachliteratur werden hierunter aber auch Situationen verstanden, in welchen mehrere Kovariate stark korreliert sind (Quasi-Multikollinearität). Wird auf einer solchen Datenbasis ein Regressionsmodell spezifiziert, dann können die individuellen Beiträge der exogenen Variablen zur funktionalen Beschreibung der endogenen Variablen nicht identifiziert werden. Die Parameterschätzung ist demnach mit großer Unsicherheit verbunden und resultierende Small Area Schätzwerte sind ungenau. Der Effekt ist besonders stark, wenn die zu modellierende Größe nicht-linear ist, wie etwa ein Anteilswert. Dies rührt daher, dass die zugrundeliegende Likelihood-Funktion nicht mehr geschlossen darstellbar ist und approximiert werden muss. Im Rahmen der Dissertation wird gezeigt, dass die Verwendung einer L2-Regularisierung den Schätzprozess in diesem Kontext signifikant stabilisiert. Am Beispiel von zwei nicht-linearen Small Area Modellen wird ein neuer Algorithmus entwickelt, welche den bereits bekannten Quasi-Likelihood Ansatz (basierend auf der Laplace-Approximation) durch Regularisierung erweitert und verbessert. Zusätzlich werden parametrische Verfahren zur Unsicherheitsmessung für auf diese Weise erhaltene Schätzwerte beschrieben.
Vor dem Hintergrund der theoretischen und numerischen Ergebnisse wird in der Dissertation demonstriert, dass Regularisierungsmethoden eine wertvolle Ergänzung der Fachliteratur für Small Area Estimation darstellen. Die hier entwickelten Verfahren sind robust und vielseitig einsetzbar, was sie zu hilfreichen Werkzeugen der empirischen Datenanalyse macht.

In the modeling context, non-linearities and uncertainty go hand in hand. In fact, the utility function's curvature determines the degree of risk-aversion. This concept is exploited in the first article of this thesis, which incorporates uncertainty into a small-scale DSGE model. More specifically, this is done by a second-order approximation, while carrying out the derivation in great detail and carefully discussing the more formal aspects. Moreover, the consequences of this method are discussed when calibrating the equilibrium condition. The second article of the thesis considers the essential model part of the first paper and focuses on the (forward-looking) data needed to meet the model's requirements. A large number of uncertainty measures are utilized to explain a possible approximation bias. The last article keeps to the same topic but uses statistical distributions instead of actual data. In addition, theoretical (model) and calibrated (data) parameters are used to produce more general statements. In this way, several relationships are revealed with regard to a biased interpretation of this class of models. In this dissertation, the respective approaches are explained in full detail and also how they build on each other.
In summary, the question remains whether the exact interpretation of model equations should play a role in macroeconomics. If we answer this positively, this work shows to what extent the practical use can lead to biased results.

This dissertation deals with consistent estimates in household surveys. Household surveys are often drawn via cluster sampling, with households sampled at the first stage and persons selected at the second stage. The collected data provide information for estimation at both the person and the household level. However, consistent estimates are desirable in the sense that the estimated household-level totals should coincide with the estimated totals obtained at the person-level. Current practice in statistical offices is to use integrated weighting. In this approach consistent estimates are guaranteed by equal weights for all persons within a household and the household itself. However, due to the forced equality of weights, the individual patterns of persons are lost and the heterogeneity within households is not taken into account. In order to avoid the negative consequences of integrated weighting, we propose alternative weighting methods in the first part of this dissertation that ensure both consistent estimates and individual person weights within a household. The underlying idea is to limit the consistency conditions to variables that emerge in both the personal and household data sets. These common variables are included in the person- and household-level estimator as additional auxiliary variables. This achieves consistency more directly and only for the relevant variables, rather than indirectly by forcing equal weights on all persons within a household. Further decisive advantages of the proposed alternative weighting methods are that original individual rather than the constructed aggregated auxiliaries are utilized and that the variable selection process is more flexible because different auxiliary variables can be incorporated in the person-level estimator than in the household-level estimator.
In the second part of this dissertation, the variances of a person-level GREG estimator and an integrated estimator are compared in order to quantify the effects of the consistency requirements in the integrated weighting approach. One of the challenges is that the estimators to be compared are of different dimensions. The proposed solution is to decompose the variance of the integrated estimator into the variance of a reduced GREG estimator, whose underlying model is of the same dimensions as the person-level GREG estimator, and add a constructed term that captures the effects disregarded by the reduced model. Subsequently, further fields of application for the derived decomposition are proposed such as the variable selection process in the field of econometrics or survey statistics.

The German Mittelstand is closely linked to the success of the German economy. Mittelstand firms, thereof numerous Hidden Champions, significantly contribute to Germany’s economic performance, innovation, and export strength. However, the advancing digitalization poses complex challenges for Mittelstand firms. To benefit from the manifold opportunities offered by digital technologies and to defend or even expand existing market positions, Mittelstand firms must transform themselves and their business models. This dissertation uses quantitative methods and contributes to a deeper understanding of the distinct needs and influencing factors of the digital transformation of Mittelstand firms. The results of the empirical analyses of a unique database of 525 mid-sized German manufacturing firms, comprising both firm-related information and survey data, show that organizational capabilities and characteristics significantly influence the digital transformation of Mittelstand firms. The results support the assumption that dynamic capabilities promote the digital transformation of such firms and underline the important role of ownership structure, especially regarding family influence, for the digital transformation of the business model and the pursuit of growth goals with digitalization. In addition to the digital transformation of German Mittelstand firms, this dissertation examines the economic success and regional impact of Hidden Champions and hence, contributes to a better understanding of the Hidden Champion phenomenon. Using quantitative methods, it can be empirically proven that Hidden Champions outperform other mid-sized firms in financial terms and promote regional development. Consequently, the results of this dissertation provide valuable research contributions and offer various practical implications for firm managers and owners as well as policy makers.

This thesis addresses three different topics from the fields of mathematical finance, applied probability and stochastic optimal control. Correspondingly, it is subdivided into three independent main chapters each of which approaches a mathematical problem with a suitable notion of a stochastic particle system.
In Chapter 1, we extend the branching diffusion Monte Carlo method of Henry-Labordère et. al. (2019) to the case of parabolic PDEs with mixed local-nonlocal analytic nonlinearities. We investigate branching diffusion representations of classical solutions, and we provide sufficient conditions under which the branching diffusion representation solves the PDE in the viscosity sense. Our theoretical setup directly leads to a Monte Carlo algorithm, whose applicability is showcased in two stylized high-dimensional examples. As our main application, we demonstrate how our methodology can be used to value financial positions with defaultable, systemically important counterparties.
In Chapter 2, we formulate and analyze a mathematical framework for continuous-time mean field games with finitely many states and common noise, including a rigorous probabilistic construction of the state process. The key insight is that we can circumvent the master equation and reduce the mean field equilibrium to a system of forward-backward systems of (random) ordinary differential equations by conditioning on common noise events. We state and prove a corresponding existence theorem, and we illustrate our results in three stylized application examples. In the absence of common noise, our setup reduces to that of Gomes, Mohr and Souza (2013) and Cecchin and Fischer (2020).
In Chapter 3, we present a heuristic approach to tackle stochastic impulse control problems in discrete time. Based on the work of Bensoussan (2008) we reformulate the classical Bellman equation of stochastic optimal control in terms of a discrete-time QVI, and we prove a corresponding verification theorem. Taking the resulting optimal impulse control as a starting point, we devise a self-learning algorithm that estimates the continuation and intervention region of such a problem. Its key features are that it explores the state space of the underlying problem by itself and successively learns the behavior of the optimally controlled state process. For illustration, we apply our algorithm to a classical example problem, and we give an outlook on open questions to be addressed in future research.

Zeitgleich mit stetig wachsenden gesellschaftlichen Herausforderungen haben im vergangenen Jahrzehnt Sozialunternehmen stark an Bedeutung gewonnen. Sozialunternehmen verfolgen das Ziel, mit unternehmerischen Mitteln gesellschaftliche Probleme zu lösen. Da der Fokus von Sozialunternehmen nicht hauptsächlich auf der eigenen Gewinnmaximierung liegt, haben sie oftmals Probleme, geeignete Unternehmensfinanzierungen zu erhalten und Wachstumspotenziale zu verwirklichen.
Zur Erlangung eines tiefergehenden Verständnisses des Phänomens der Sozialunternehmen untersucht der erste Teil dieser Dissertation anhand von zwei Studien auf der Basis eines Experiments das Entscheidungsverhalten der Investoren von Sozialunternehmen. Kapitel 2 betrachtet daher das Entscheidungsverhalten von Impact-Investoren. Der von diesen Investoren verfolgte Investmentansatz „Impact Investing“ geht über eine reine Orientierung an Renditen hinaus. Anhand eines Experiments mit 179 Impact Investoren, die insgesamt 4.296 Investitionsentscheidungen getroffen haben, identifiziert eine Conjoint-Studie deren wichtigste Entscheidungskriterien bei der Auswahl der Sozialunternehmen. Kapitel 3 analysiert mit dem Fokus auf sozialen Inkubatoren eine weitere spezifische Gruppe von Unterstützern von Sozialunternehmen. Dieses Kapitel veranschaulicht auf der Basis des Experiments die Motive und Entscheidungskriterien der Inkubatoren bei der Auswahl von Sozialunternehmen sowie die von ihnen angebotenen Formen der nichtfinanziellen Unterstützung. Die Ergebnisse zeigen unter anderem, dass die Motive von sozialen Inkubatoren bei der Unterstützung von Sozialunternehmen unter anderem gesellschaftlicher, finanzieller oder reputationsbezogener Natur sind.
Der zweite Teil erörtert auf der Basis von zwei quantitativ empirischen Studien, inwiefern die Registrierung von Markenrechten sich zur Messung sozialer Innovationen eignet und mit finanziellem und sozialem Wachstum von sozialen Startups in Verbindung steht. Kapitel 4 erörtert, inwiefern Markenregistrierungen zur Messung von sozialen Innovationen dienen können. Basierend auf einer Textanalyse der Webseiten von 925 Sozialunternehmen (> 35.000 Unterseiten) werden in einem ersten Schritt vier Dimensionen sozialer Innovationen (Innovations-, Impact-, Finanz- und Skalierbarkeitsdimension) ermittelt. Darauf aufbauend betrachtet dieses Kapitel, wie verschiedene Markencharakteristiken mit den Dimensionen sozialer Innovationen zusammenhängen. Die Ergebnisse zeigen, dass insbesondere die Anzahl an registrierten Marken als Indikator für soziale Innovationen (alle Dimensionen) dient. Weiterhin spielt die geografische Reichweite der registrierten Marken eine wichtige Rolle. Aufbauend auf den Ergebnissen von Kapitel 4 untersucht Kapitel 5 den Einfluss von Markenregistrierungen in frühen Unternehmensphasen auf die weitere Entwicklung der hybriden Ergebnisse von sozialen Startups. Im Detail argumentiert Kapitel 5, dass sowohl die Registrierung von Marken an sich als auch deren verschiedene Charakteristiken unterschiedlich mit den sozialen und ökonomischen Ergebnissen von sozialen Startups in Verbindung stehen. Anhand eines Datensatzes von 485 Sozialunternehmen zeigen die Analysen aus Kapitel 5, dass soziale Startups mit einer registrierten Marke ein vergleichsweise höheres Mitarbeiterwachstum aufweisen und einen größeren gesellschaftlichen Beitrag leisten.
Die Ergebnisse dieser Dissertation weiten die Forschung im Social Entrepreneurship-Bereich weiter aus und bieten zahlreiche Implikationen für die Praxis. Während Kapitel 2 und 3 das Verständnis über die Eigenschaften von nichtfinanziellen und finanziellen Unterstützungsorganisationen von Sozialunternehmen vergrößern, schaffen Kapitel 4 und 5 ein größeres Verständnis über die Bedeutung von Markenanmeldungen für Sozialunternehmen.

In this thesis, we consider the solution of high-dimensional optimization problems with an underlying low-rank tensor structure. Due to the exponentially increasing computational complexity in the number of dimensions—the so-called curse of dimensionality—they present a considerable computational challenge and become infeasible even for moderate problem sizes.
Multilinear algebra and tensor numerical methods have a wide range of applications in the fields of data science and scientific computing. Due to the typically large problem sizes in practical settings, efficient methods, which exploit low-rank structures, are essential. In this thesis, we consider an application each in both of these fields.
Tensor completion, or imputation of unknown values in partially known multiway data is an important problem, which appears in statistics, mathematical imaging science and data science. Under the assumption of redundancy in the underlying data, this is a well-defined problem and methods of mathematical optimization can be applied to it.
Due to the fact that tensors of fixed rank form a Riemannian submanifold of the ambient high-dimensional tensor space, Riemannian optimization is a natural framework for these problems, which is both mathematically rigorous and computationally efficient.
We present a novel Riemannian trust-region scheme, which compares favourably with the state of the art on selected application cases and outperforms known methods on some test problems.
Optimization problems governed by partial differential equations form an area of scientific computing which has applications in a variety of areas, ranging from physics to financial mathematics. Due to the inherent high dimensionality of optimization problems arising from discretized differential equations, these problems present computational challenges, especially in the case of three or more dimensions. An even more challenging class of optimization problems has operators of integral instead of differential type in the constraint. These operators are nonlocal, and therefore lead to large, dense discrete systems of equations. We present a novel solution method, based on separation of spatial dimensions and provably low-rank approximation of the nonlocal operator. Our approach allows the solution of multidimensional problems with a complexity which is only slightly larger than linear in the univariate grid size; this improves the state of the art for a particular test problem problem by at least two orders of magnitude.

Broadcast media such as television have spread rapidly worldwide in the last century. They provide viewers with access to new information and also represent a source of entertainment that unconsciously exposes them to different social norms and moral values. Although the potential impact of exposure to television content have been studied intensively in economic research in recent years, studies examining the long-term causal effects of media exposure are still rare. Therefore, Chapters 2 to 4 of this thesis contribute to the better understanding of long-term effects of television exposure.
Chapter 2 empirically investigates whether access to reliable environmental information through television can influence individuals' environmental awareness and pro-environmental behavior. Analyzing exogenous variation in Western television reception in the German Democratic Republic shows that access to objective reporting on environmental pollution can enhance concerns regarding pollution and affect the likelihood of being active in environmental interest groups.
Chapter 3 utilizes the same natural experiment and explores the relationship between exposure to foreign mass media content and xenophobia. In contrast to the state television broadcaster in the German Democratic Republic, West German television regularly confronted its viewers with foreign (non-German) broadcasts. By applying multiple measures for xenophobic attitudes, our findings indicate a persistent mitigating impact of foreign media content on xenophobia.
Chapter 4 deals with another unique feature of West German television. In contrast to East German media, Western television programs regularly exposed their audience to unmarried and childless characters. The results suggest that exposure to different gender stereotypes contained in television programs can affect marriage, divorce, and birth rates. However, our findings indicate that mainly women were affected by the exposure to unmarried and childless characters.
Chapter 5 examines the influence of social media marketing on crowd participation in equity crowdfunding. By analyzing 26,883 investment decisions on three German equity crowdfunding platforms, our results show that startups can influence the success of their equity crowdfunding campaign through social media posts on Facebook and Twitter.
In Chapter 6, we incorporate the concept of habit formation into the theoretical literature on trade unions and contribute to a better understanding of how internal habit preferences influence trade union behavior. The results reveal that such internal reference points lead trade unions to raise wages over time, which in turn reduces employment. Conducting a numerical example illustrates that the wage effects and the decline in employment can be substantial.

With two-thirds to three-quarters of all companies, family firms are the most common firm type worldwide and employ around 60 percent of all employees, making them of considerable importance for almost all economies. Despite this high practical relevance, academic research took notice of family firms as intriguing research subjects comparatively late. However, the field of family business research has grown eminently over the past two decades and has established itself as a mature research field with a broad thematic scope. In addition to questions relating to corporate governance, family firm succession and the consideration of entrepreneurial families themselves, researchers mainly focused on the impact of family involvement in firms on their financial performance and firm strategy. This dissertation examines the financial performance and capital structure of family firms in various meta-analytical studies. Meta-analysis is a suitable method for summarizing existing empirical findings of a research field as well as identifying relevant moderators of a relationship of interest.
First, the dissertation examines the question whether family firms show better financial performance than non-family firms. A replication and extension of the study by O’Boyle et al. (2012) based on 1,095 primary studies reveals a slightly better performance of family firms compared to non-family firms. Investigating the moderating impact of methodological choices in primary studies, the results show that outperformance holds mainly for large and publicly listed firms and with regard to accounting-based performance measures. Concerning country culture, family firms show better performance in individualistic countries and countries with a low power distance.
Furthermore, this dissertation investigates the sensitivity of family firm performance with regard to business cycle fluctuations. Family firms show a pro-cyclical performance pattern, i.e. their relative financial performance compared to non-family firms is better in economically good times. This effect is particularly pronounced in Anglo-American countries and emerging markets.
In the next step, a meta-analytic structural equation model (MASEM) is used to examine the market valuation of public family firms. In this model, profitability and firm strategic choices are used as mediators. On the one hand, family firm status itself does not have an impact on firms‘ market value. On the other hand, this study finds a positive indirect effect via higher profitability levels and a negative indirect effect via lower R&D intensity. A split consideration of family ownership and management shows that these two effects are mainly driven by family ownership, while family management results in less diversification and internationalization.
Finally, the dissertation examines the capital structure of public family firms. Univariate meta-analyses indicate on average lower leverage ratios in family firms compared to non-family firms. However, there is significant heterogeneity in mean effect sizes across the 45 countries included in the study. The results of a meta-regression reveal that family firms use leverage strategically to secure their controlling position in the firm. While strong creditor protection leads to lower leverage ratios in family firms, strong shareholder protection has the opposite effect.

Traditional workflow management systems support process participants in fulfilling business tasks through guidance along a predefined workflow model.
Flexibility has gained a lot of attention in recent decades through a shift from mass production to customization. Various approaches to workflow flexibility exist that either require extensive knowledge acquisition and modelling effort or an active intervention during execution and re-modelling of deviating behaviour. The pursuit of flexibility by deviation is to compensate both of these disadvantages through allowing alternative unforeseen execution paths at run time without demanding the process participant to adapt the workflow model. However, the implementation of this approach has been little researched so far.
This work proposes a novel approach to flexibility by deviation. The approach aims at supporting process participants during the execution of a workflow through suggesting work items based on predefined strategies or experiential knowledge even in case of deviations. The developed concepts combine two renowned methods from the field of artificial intelligence - constraint satisfaction problem solving with process-oriented case-based reasoning. This mainly consists of a constraint-based workflow engine in combination with a case-based deviation management. The declarative representation of workflows through constraints allows for implicit flexibility and a simple possibility to restore consistency in case of deviations. Furthermore, the combined model, integrating procedural with declarative structures through a transformation function, increases the capabilities for flexibility. For an adequate handling of deviations the methodology of case-based reasoning fits perfectly, through its approach that similar problems have similar solutions. Thus, previous made experiences are transferred to currently regarded problems, under the assumption that a similar deviation has been handled successfully in the past.
Necessary foundations from the field of workflow management with a focus on flexibility are presented first.
As formal foundation, a constraint-based workflow model was developed that allows for a declarative specification of foremost sequential dependencies of tasks. Procedural and declarative models can be combined in the approach, as a transformation function was specified that converts procedural workflow models to declarative constraints.
One main component of the approach is the constraint-based workflow engine that utilizes this declarative model as input for a constraint solving algorithm. This algorithm computes the worklist, which is proposed to the process participant during workflow execution. With predefined deviation handling strategies that determine how the constraint model is modified in order to restore consistency, the support is continuous even in case of deviations.
The second major component of the proposed approach constitutes the case-based deviation management, which aims at improving the support of process participants on the basis of experiential knowledge. For the retrieve phase, a sophisticated similarity measure was developed that integrates specific characteristics of deviating workflows and combines several sequence similarity measures. Two alternative methods for the reuse phase were developed, a null adaptation and a generative adaptation. The null adaptation simply proposes tasks from the most similar workflow as work items, whereas the generative adaptation modifies the constraint-based workflow model based on the most similar workflow in order to re-enable the constraint-based workflow engine to suggest work items.
The experimental evaluation of the approach consisted of a simulation of several types of process participants in the exemplary domain of deficiency management in construction. The results showed high utility values and a promising potential for an investigation of the transfer on other domains and the applicability in practice, which is part of future work.
Concluding, the contributions are summarized and research perspectives are pointed out.

Data used for the purpose of machine learning are often erroneous. In this thesis, p-quasinorms (p<1) are employed as loss functions in order to increase the robustness of training algorithms for artificial neural networks. Numerical issues arising from these loss functions are addressed via enhanced optimization algorithms (proximal point methods; Frank-Wolfe methods) based on the (non-monotonic) Armijo-rule. Numerical experiments comprising 1100 test problems confirm the effectiveness of the approach. Depending on the parametrization, an average reduction of the absolute residuals of up to 64.6% is achieved (aggregated over 100 test problems).

Entrepreneurial ventures are associated with economic growth, job creation, and innovation. Most entrepreneurial ventures need external funding to succeed. However, they often find it difficult to access traditional forms of financing, such as bank loans. To overcome this hurdle and to provide entrepreneurial ventures with badly-needed external capital, many types of entrepreneurial finance have emerged over the past decades and continue to emerge today. Inspired by these dynamics, this postdoctoral thesis contains five empirical studies that address novel questions regarding established (e.g., venture capital, business angels) and new types of entrepreneurial finance (i.e., initial coin offerings).

Some of the largest firms in the DACH region (Germany, Austria, Switzerland) are (partially) owned by a foundation and/or a family office, such as Aldi, Bosch, or Rolex. Despite their growing importance, prior research neglected to analyze the impact of these intermediaries on the firms they own. This dissertation closes this research gap by contributing to a deeper understanding of two increasingly used family firm succession vehicles, through four empirical quantitative studies. The first study focuses on the heterogeneity in foundation-owned firms (FOFs) by applying a descriptive analysis to a sample of 169 German FOFs. The results indicate that the family as a central stakeholder in a family foundation fosters governance that promotes performance and growth. The second study examines the firm growth of 204 FOFs compared to matched non-FOFs from the DACH region. The findings suggest that FOFs grow significantly less in terms of sales but not with regard to employees. In addition, it seems that this negative effect is stronger for the upper than for the middle or lower quantiles of the growth distribution. Study three adopts an agency perspective and investigates the acquisition behavior within the group of 164 FOFs. The results reveal that firms with charitable foundations as owners are more likely to undertake acquisitions and acquire targets that are geographically and culturally more distant than firms with a family foundation as owner. At the same time, they favor target companies from the same or related industries. Finally, the fourth study scrutinizes the capital structure of firms owned by single family-offices (SFOs). Drawing on a hand-collected sample of 173 SFO-owned firms in the DACH region, the results show that SFO-owned firms display a higher long-term debt ratio than family-owned firms, indicating that SFO-owned firms follow trade-off theory, similar to private equity-owned firms. Additional analyses show that this effect is stronger for SFOs that sold their original family firm. In conclusion, the outcomes of this dissertation furnish valuable research contributions and offer practical insights for families navigating such intermediaries or succession vehicles in the long term.

This dissertation is dedicated to the analysis of the stabilty of portfolio risk and the impact of European regulation introducing risk based classifications for investment funds.
The first paper examines the relationship between portfolio size and the stability of mutual fund risk measures, presenting evidence for economies of scale in risk management. In a unique sample of 338 fund portfolios we find that the volatility of risk numbers decreases for larger funds. This finding holds for dispersion as well as tail risk measures. Further analyses across asset classes provide evidence for the robustness of the effect for balanced and fixed income portfolios. However, a size effect did not emerge for equity funds, suggesting that equity fund managers simply scale their strategy up as they grow. Analyses conducted on the differences in risk stability between tail risk measures and volatilities reveal that smaller funds show higher discrepancies in that respect. In contrast to the majority of prior studies on the basis of ex-post time series risk numbers, this study contributes to the literature by using ex-ante risk numbers based on the actual assets and de facto portfolio data.
The second paper examines the influence of European legislation regarding risk classification of mutual funds. We conduct analyses on a set of worldwide equity indices and find that a strategy based on the long term volatility as it is imposed by the Synthetic Risk Reward Indicator (SRRI) would lead to substantial variations in exposures ranging from short phases of very high leverage to long periods of under investments that would be required to keep the risk classes. In some cases, funds will be forced to migrate to higher risk classes due to limited means to reduce volatilities after crises events. In other cases they might have to migrate to lower risk classes or increase their leverage to ridiculous amounts. Overall, we find if the SRRI creates a binding mechanism for fund managers, it will create substantial interference with the core investment strategy and may incur substantial deviations from it. Fruthermore due to the forced migrations the SRRI degenerates to a passive indicator.
The third paper examines the impact of this volatility based fund classification on portfolio performance. Using historical data on equity indices we find initially that a strategy based on long term portfolio volatility, as it is imposed by the Synthetic Risk Reward Indicator (SRRI), yields better Sharpe Ratios (SRs) and Buy and Hold Returns (BHRs) for the investment strategies matching the risk classes. Accounting for the Fama-French factors reveals no significant alphas for the vast majority of the strategies. In our simulation study where volatility was modelled through a GJR(1,1) - model we find no significant difference in mean returns, but significantly lower SRs for the volatility based strategies. These results were confirmed in robustness checks using alternative models and timeframes. Overall we present evidence which suggests that neither the higher leverage induced by the SRRI nor the potential protection in downside markets does pay off on a risk adjusted basis.

The Eurosystem's Household Finance and Consumption Survey (HFCS) collects micro data on private households' balance sheets, income and consumption. It is a stylised fact that wealth is unequally distributed and that the wealthiest own a large share of total wealth. For sample surveys which aim at measuring wealth and its distribution, this is a considerable problem. To overcome it, some of the country surveys under the HFCS umbrella try to sample a disproportionately large share of households that are likely to be wealthy, a technique referred to as oversampling. Ignoring such types of complex survey designs in the estimation of regression models can lead to severe problems. This thesis first illustrates such problems using data from the first wave of the HFCS and canonical regression models from the field of household finance and gives a first guideline for HFCS data users regarding the use of replicate weight sets for variance estimation using a variant of the bootstrap. A further investigation of the issue necessitates a design-based Monte Carlo simulation study. To this end, the already existing large close-to-reality synthetic simulation population AMELIA is extended with synthetic wealth data. We discuss different approaches to the generation of synthetic micro data in the context of the extension of a synthetic simulation population that was originally based on a different data source. We propose an additional approach that is suitable for the generation of highly skewed synthetic micro data in such a setting using a multiply-imputed survey data set. After a description of the survey designs employed in the first wave of the HFCS, we then construct new survey designs for AMELIA that share core features of the HFCS survey designs. A design-based Monte Carlo simulation study shows that while more conservative approaches to oversampling do not pose problems for the estimation of regression models if sampling weights are properly accounted for, the same does not necessarily hold for more extreme oversampling approaches. This issue should be further analysed in future research.

Estimation and therefore prediction -- both in traditional statistics and machine learning -- encounters often problems when done on survey data, i.e. on data gathered from a random subset of a finite population. Additional to the stochastic generation of the data in the finite population (based on a superpopulation model), the subsetting represents a second randomization process, and adds further noise to the estimation. The character and impact of the additional noise on the estimation procedure depends on the specific probability law for subsetting, i.e. the survey design. Especially when the design is complex or the population data is not generated by a Gaussian distribution, established methods must be re-thought. Both phenomena can be found in business surveys, and their combined occurrence poses challenges to the estimation.
This work introduces selected topics linked to relevant use cases of business surveys and discusses the role of survey design therein: First, consider micro-econometrics using business surveys. Regression analysis under the peculiarities of non-normal data and complex survey design is discussed. The focus lies on mixed models, which are able to capture unobserved heterogeneity e.g. between economic sectors, when the dependent variable is not conditionally normally distributed. An algorithm for survey-weighted model estimation in this setting is provided and applied to business data.
Second, in official statistics, the classical sampling randomization and estimators for finite population totals are relevant. The variance estimation of estimators for (finite) population totals plays a major role in this framework in order to decide on the reliability of survey data. When the survey design is complex, and the number of variables is large for which an estimated total is required, generalized variance functions are popular for variance estimation. They allow to circumvent cumbersome theoretical design-based variance formulae or computer-intensive resampling. A synthesis of the superpopulation-based motivation and the survey framework is elaborated. To the author's knowledge, such a synthesis is studied for the first time both theoretically and empirically.
Third, the self-organizing map -- an unsupervised machine learning algorithm for data visualization, clustering and even probability estimation -- is introduced. A link to Markov random fields is outlined, which to the author's knowledge has not yet been established, and a density estimator is derived. The latter is evaluated in terms of a Monte-Carlo simulation and then applied to real world business data.

Institutional and cultural determinants of speed of government responses during COVID-19 pandemic
(2021)

This article examines institutional and cultural determinants of the speed of government responses during the COVID-19 pandemic. We define the speed as the marginal rate of stringency index change. Based on cross-country data, we find that collectivism is associated with higher speed of government response. We also find a moderating role of trust in government, i.e., the association of individualism-collectivism on speed is stronger in countries with higher levels of trust in government. We do not find significant predictive power of democracy, media freedom and power distance on the speed of government responses.

Surveys play a major role in studying social and behavioral phenomena that are difficult to
observe. Survey data provide insights into the determinants and consequences of human
behavior and social interactions. Many domains rely on high quality survey data for decision
making and policy implementation including politics, health, business, and the social
sciences. Given a certain research question in a specific context, finding the most appropriate
survey design to ensure data quality and keep fieldwork costs low at the same time is a
difficult task. The aim of examining survey research methodology is to provide the best
evidence to estimate the costs and errors of different survey design options. The goal of this
thesis is to support and optimize the accumulation and sustainable use of evidence in survey
methodology in four steps:
(1) Identifying the gaps in meta-analytic evidence in survey methodology by a systematic
review of the existing evidence along the dimensions of a central framework in the
field
(2) Filling in these gaps with two meta-analyses in the field of survey methodology, one
on response rates in psychological online surveys, the other on panel conditioning
effects for sensitive items
(3) Assessing the robustness and sufficiency of the results of the two meta-analyses
(4) Proposing a publication format for the accumulation and dissemination of metaanalytic
evidence

This thesis deals with REITs, their capital structure and the effects on leverage that regulatory requirements might have. The data used results from a combination of Thomson Reuters data with hand-collected data regarding the REIT status, regulatory information and law variables. Overall, leverage is analysed across 20 countries in the years 2007 to 2018. Country specific data, manually extracted from yearly EPRA reportings, is merged with company data in order to analyse the influence of different REIT restrictions on a firm's leverage.
Observing statistically significant differences in means across NON-REITs and REITs, causes motivation for further investigations. My results show that variables beyond traditional capital structure determinants impact the leverage of REITs. I find that explicit restrictions on leverage and the distribution of profits have a significant effect on leverage decisions. This supports the notion that the restrictions from EPRA reportings are mandatory. I test for various combinations of regulatory variables that show both in isolation as well as in combination significant effects on leverage.
My main result is the following: Firms that operate under regulation that specifies a maximum leverage ratio, in addition to mandatory high dividend distributions, have on average lower leverage ratios. Further the existence of sanctions has a negative effect on REITs' leverage ratios, indicating that regulation is binding. The analysis clearly shows that traditional capital structure determinants are of second order relevance. This relationship highlights the impact on leverage and financing decisions caused by regulation. These effects are supported by further analysis. Results based on an event study show that REITs have statistically lower leverage ratios compared to NON-REITs. Based on a structural break model, the following effect becomes apparent: REITs increase their leverage ratios in years prior REIT status. As a consequence, the ex ante time frame is characterised by a bunker and adaption process, followed by the transformation in the event. Using an event study and a structural break model, the analysis highlights the dominance of country-specific regulation.

Let K be a compact subset of the complex plane. Then the family of polynomials P is dense in A(K), the space of all continuous functions on K that are holomorphic on the interior of K, endowed with the uniform norm, if and only if the complement of K is connected. This is the statement of Mergelyan's celebrated theorem.
There are, however, situations where not all polynomials are required to approximate every f ϵ A(K) but where there are strict subspaces of P that are still dense in A(K). If, for example, K is a singleton, then the subspace of all constant polynomials is dense in A(K). On the other hand, if 0 is an interior point of K, then no strict subspace of P can be dense in A(K).
In between these extreme cases, the situation is much more complicated. It turns out that it is mostly determined by the geometry of K and its location in the complex plane which subspaces of P are dense in A(K). In Chapter 1, we give an overview of the known results.
Our first main theorem, which we will give in Chapter 3, deals with the case where the origin is not an interior point of K. We will show that if K is a compact set with connected complement and if 0 is not an interior point of K, then any subspace Q ⊂ P which contains the constant functions and all but finitely many monomials is dense in A(K).
There is a close connection between lacunary approximation and the theory of universality. At the end of Chapter 3, we will illustrate this connection by applying the above result to prove the existence of certain universal power series. To be specific, if K is a compact set with connected complement, if 0 is a boundary point of K and if A_0(K) denotes the subspace of A(K) of those functions that satisfy f(0) = 0, then there exists an A_0(K)-universal formal power series s, where A_0(K)-universal means that the family of partial sums of s forms a dense subset of A_0(K).
In addition, we will show that no formal power series is simultaneously universal for all such K.
The condition on the subspace Q in the main result of Chapter 3 is quite restrictive, but this should not be too surprising: The result applies to the largest possible class of compact sets.
In Chapter 4, we impose a further restriction on the compact sets under consideration, and this will allow us to weaken the condition on the subspace Q. The result that we are going to give is similar to one of those presented in the first chapter, namely the one due to Anderson. In his article “Müntz-Szasz type approximation and the angular growth of lacunary integral functions”, he gives a criterion for a subspace Q of P to be dense in A(K) where K is entirely contained in some closed sector with vertex at the origin.
We will consider compact sets with connected complement that are -- with the possible exception of the origin -- entirely contained in some open sector with vertex at the origin. What we are going to show is that if K\{0} is contained in an open sector of opening angle 2α and if Λ is some subset of the nonnegative integers, then the span of {z → z^λ : λ ϵ Λ} is dense in A(K) whenever 0 ϵ Λ and some Müntz-type condition is satisfied.
Conversely, we will show that if a similar condition is not satisfied, then we can always find a compact set K with connected complement such that K\{0} is contained in some open sector of opening angle 2α and such that the span of {z → z^λ : λ ϵ Λ} fails to be dense in A(K).

Striving for sustainable development by combating climate change and creating a more social world is one of the most pressing issues of our time. Growing legal requirements and customer expectations require also Mittelstand firms to address sustainability issues such as climate change. This dissertation contributes to a better understanding of sustainability in the Mittelstand context by examining different Mittelstand actors and the three dimensions of sustainability - social, economic, and environmental sustainability - in four quantitative studies. The first two studies focus on the social relevance and economic performance of hidden champions, a niche market leading subgroup of Mittelstand firms. At the regional level, the impact of 1,645 hidden champions located in Germany on various dimensions of regional development is examined. A higher concentration of hidden champions has a positive effect on regional employment, median income, and patents. At the firm level, analyses of a panel dataset of 4,677 German manufacturing firms, including 617 hidden champions, show that the latter have a higher return on assets than other Mittelstand firms. The following two chapters deal with environmental strategies and thus contribute to the exploration of the environmental dimension of sustainability. First, the consideration of climate aspects in investment decisions is compared using survey data from 468 European venture capital and private equity investors. While private equity firms respond to external stakeholders and portfolio performance and pursue an active ownership strategy, venture capital firms are motivated by product differentiation and make impact investments. Finally, based on survey data from 443 medium-sized manufacturing firms in Germany, 54% of which are family-owned, the impact of stakeholder pressures on their decarbonization strategies is analyzed. A distinction is made between symbolic (compensation of CO₂-emissions) and substantive decarbonization strategies (reduction of CO₂-emissions). Stakeholder pressures lead to a proactive pursuit of decarbonization strategies, with internal and external stakeholders varying in their influence on symbolic and substantial decarbonization strategies, and the relationship influenced by family ownership.

A basic assumption of standard small area models is that the statistic of interest can be modelled through a linear mixed model with common model parameters for all areas in the study. The model can then be used to stabilize estimation. In some applications, however, there may be different subgroups of areas, with specific relationships between the response variable and auxiliary information. In this case, using a distinct model for each subgroup would be more appropriate than employing one model for all observations. If no suitable natural clustering variable exists, finite mixture regression models may represent a solution that „lets the data decide“ how to partition areas into subgroups. In this framework, a set of two or more different models is specified, and the estimation of subgroup-specific model parameters is performed simultaneously to estimating subgroup identity, or the probability of subgroup identity, for each area. Finite mixture models thus offer a fexible approach to accounting for unobserved heterogeneity. Therefore, in this thesis, finite mixtures of small area models are proposed to account for the existence of latent subgroups of areas in small area estimation. More specifically, it is assumed that the statistic of interest is appropriately modelled by a mixture of K linear mixed models. Both mixtures of standard unit-level and standard area-level models are considered as special cases. The estimation of mixing proportions, area-specific probabilities of subgroup identity and the K sets of model parameters via the EM algorithm for mixtures of mixed models is described. Eventually, a finite mixture small area estimator is formulated as a weighted mean of predictions from model 1 to K, with weights given by the area-specific probabilities of subgroup identity.

Die vorliegende Arbeit liefert eine Kritik der Performativity-of-Economics-Debatte, welcher theoretische Probleme unterstellt werden. Dies betrifft insbesondere Defizite hinsichtlich einer handlungstheoretischen Erschließung und Erklärung ihres Gegenstandes.
Zur Überwindung dieses Problems wird eine Verknüpfung mit dem Mechanism Approach der analytischen Soziologie vorgeschlagen, welcher erstens einen explizit handlungstheoretischen Zugang bietet, zweitens über die Identifikation der zugrundeliegenden sozialen Mechanismen die Entschlüsselung sozialer Dynamiken und Prozesse erlaubt und, drittens, verschiedene Ausprägungen des zu untersuchenden Phänomens (die Performativität ökonomischer Theorien) in Theorien mittlerer Reichweite übersetzen kann. Eine Verbindung wird durch den Mechanismus der Self-fulfilling Theory als spezifische Form der Self-Fulfilling prophecy hergestellt, welche im weiteren Verlauf der Argumentation als Erklärungsinstrument des Mechanism Approach verwendet und dabei kritisch reflektiert wird.
Die handlungsbasierte Erklärung eines spezifischen Typs der Performativität ökonomischer Theorien wird schließlich anhand eines Fallbeispiels – dem Aufstieg und der Verbreitung des Shareholder-Value-Ansatzes und der zugrundeliegenden Agency Theory – empirisch demonstriert. Es kann gezeigt werden, dass mechanismenbasierte Erklärungen zur allgemeinen theoretischen Aufwertung der besagten Debatte beitragen können. Der Mechanismus der Self-fulfilling Theory im Speziellen bietet zur Erklärung des untersuchten Phänomens verschiedene Vor- und Nachteile, kann allerdings als eine theoretische Brücke ebenfalls einen fruchtbaren Beitrag leisten, nicht zuletzt indem er eine differenzierte Betrachtung des Zusammenhangs zwischen starken Formen von Performativität und selbsterfüllenden Prophezeiungen erlaubt.

External capital plays an important role in financing entrepreneurial ventures, due to limited internal capital sources. An important external capital provider for entrepreneurial ventures are venture capitalists (VCs). VCs worldwide are often confronted with thousands of proposals of entrepreneurial ventures per year and must choose among all of these companies in which to invest. Not only do VCs finance companies at their early stages, but they also finance entrepreneurial companies in their later stages, when companies have secured their first market success. That is why this dissertation focuses on the decision-making behavior of VCs when investing in later-stage ventures. This dissertation uses both qualitative as well as quantitative research methods in order to provide answer to how the decision-making behavior of VCs that invest in later-stage ventures can be described.
Based on qualitative interviews with 19 investment professionals, the first insight gained is that for different stages of venture development, different decision criteria are applied. This is attributed to different risks and goals of ventures at different stages, as well as the different types of information available. These decision criteria in the context of later-stage ventures contrast with results from studies that focus on early-stage ventures. Later-stage ventures possess meaningful information on financials (revenue growth and profitability), the established business model, and existing external investors that is not available for early-stage ventures and therefore constitute new decision criteria for this specific context.
Following this identification of the most relevant decision criteria for investors in the context of later-stage ventures, a conjoint study with 749 participants was carried out to understand the relative importance of decision criteria. The results showed that investors attribute the highest importance to 1) revenue growth, (2) value-added of products/services for customers, and (3) management team track record, demonstrating differences when compared to decision-making studies in the context of early-stage ventures.
Not only do the characteristics of a venture influence the decision to invest, additional indirect factors, such as individual characteristics or characteristics of the investment firm, can influence individual decisions. Relying on cognitive theory, this study investigated the influence of various individual characteristics on screening decisions and found that both investment experience and entrepreneurial experience have an influence on individual decision-making behavior. This study also examined whether goals, incentive structures, resources, and governance of the investment firm influence decision making in the context of later-stage ventures. This study particularly investigated two distinct types of investment firms, family offices and corporate venture capital funds (CVC), which have unique structures, goals, and incentive systems. Additional quantitative analysis showed that family offices put less focus on high-growth firms and whether reputable investors are present. They tend to focus more on the profitability of a later-stage venture in the initial screening. The analysis showed that CVCs place greater importance on product and business model characteristics than other investors. CVCs also favor later-stage ventures with lower revenue growth rates, indicating a preference for less risky investments. The results provide various insights for theory and practice.

Structured Eurobonds - Optimal Construction, Impact on the Euro and the Influence of Interest Rates
(2020)

Structured Eurobonds are a prominent topic in the discussions how to complete the monetary and fiscal union. This work sheds light on several issues going hand in hand with the introduction of common bonds. At first a crucial question is on the optimal construction, e.g. what is the optimal common liability. Other questions that arise belong to the time after the introduction. The impact on several exchnage rates is examined in this work. Finally an approximation bias in forward-looking DSGE models is quantified which would lead to an adjustment of central bank interest rates and therefore has an impact on the other two topics.

Many combinatorial optimization problems on finite graphs can be formulated as conic convex programs, e.g. the stable set problem, the maximum clique problem or the maximum cut problem. Especially NP-hard problems can be written as copositive programs. In this case the complexity is moved entirely into the copositivity constraint.
Copositive programming is a quite new topic in optimization. It deals with optimization over the so-called copositive cone, a superset of the positive semidefinite cone, where the quadratic form x^T Ax has to be nonnegative for only the nonnegative vectors x. Its dual cone is the cone of completely positive matrices, which includes all matrices that can be decomposed as a sum of nonnegative symmetric vector-vector-products.
The related optimization problems are linear programs with matrix variables and cone constraints.
However, some optimization problems can be formulated as combinatorial problems on infinite graphs. For example, the kissing number problem can be formulated as a stable set problem on a circle.
In this thesis we will discuss how the theory of copositive optimization can be lifted up to infinite dimension. For some special cases we will give applications in combinatorial optimization.