Filtern
Erscheinungsjahr
Dokumenttyp
- Wissenschaftlicher Artikel (50)
- Dissertation (45)
- Konferenzveröffentlichung (3)
- Arbeitspapier (1)
Sprache
- Englisch (99) (entfernen)
Schlagworte
- Fernerkundung (18)
- Modellierung (14)
- Satellitenfernerkundung (8)
- Meereis (7)
- Arctic (5)
- Arktis (5)
- Atmosphärische Grenzschicht (5)
- Remote Sensing (5)
- Rheinland-Pfalz (5)
- Deutschland (4)
Institut
- Raum- und Umweltwissenschaften (99) (entfernen)
A satellite-based climatology of wind-induced surface temperature anomalies for the Antarctic
(2019)
It is well-known that katabatic winds can be detected as warm signatures in the surface temperature over the slopes of the Antarctic ice sheets. For appropriate synoptic forcing and/or topographic channeling, katabatic surges occur, which result in warm signatures also over adjacent ice shelves. Moderate Resolution Imaging Spectroradiometer (MODIS) ice surface temperature (IST) data are used to detect warm signatures over the Antarctic for the winter periods 2002–2017. In addition, high-resolution (5 km) regional climate model data is used for the years of 2002 to 2016. We present a case study and a climatology of wind-induced IST anomalies for the Ross Ice Shelf and the eastern Weddell Sea. The IST anomaly distributions show maxima around 10–15K for the slopes, but values of more than 25K are also found. Katabatic surges represent a strong climatological signal with a mean warm anomaly of more than 5K on more than 120 days per winter for the Byrd Glacier and the Nimrod Glacier on the Ross Ice Shelf. The mean anomaly for the Brunt Ice Shelf is weaker, and exceeds 5K on about 70 days per winter. Model simulations of the IST are compared to the MODIS IST, and show a very good agreement. The model data show that the near-surface stability is a better measure for the response to the wind than the IST itself.
This paper describes the concept of the hyperspectral Earth-observing thermal infrared (TIR) satellite mission HiTeSEM (High-resolution Temperature and Spectral Emissivity Mapping). The scientific goal is to measure specific key variables from the biosphere, hydrosphere, pedosphere, and geosphere related to two global problems of significant societal relevance: food security and human health. The key variables comprise land and sea surface radiation temperature and emissivity, surface moisture, thermal inertia, evapotranspiration, soil minerals and grain size components, soil organic carbon, plant physiological variables, and heat fluxes. The retrieval of this information requires a TIR imaging system with adequate spatial and spectral resolutions and with day-night following observation capability. Another challenge is the monitoring of temporally high dynamic features like energy fluxes, which require adequate revisit time. The suggested solution is a sensor pointing concept to allow high revisit times for selected target regions (1"5 days at off-nadir). At the same time, global observations in the nadir direction are guaranteed with a lower temporal repeat cycle (>1 month). To account for the demand of a high spatial resolution for complex targets, it is suggested to combine in one optic (1) a hyperspectral TIR system with ~75 bands at 7.2"12.5 -µm (instrument NEDT 0.05 K"0.1 K) and a ground sampling distance (GSD) of 60 m, and (2) a panchromatic high-resolution TIR-imager with two channels (8.0"10.25 -µm and 10.25"12.5 -µm) and a GSD of 20 m. The identified science case requires a good correlation of the instrument orbit with Sentinel-2 (maximum delay of 1"3 days) to combine data from the visible and near infrared (VNIR), the shortwave infrared (SWIR) and TIR spectral regions and to refine parameter retrieval.
Measurements of the atmospheric boundary layer (ABL) structure were performed for three years (October 2017–August 2020) at the Russian observatory “Ice Base Cape Baranova” (79.280° N, 101.620° E) using SODAR (Sound Detection And Ranging). These measurements were part of the YOPP (Year of Polar Prediction) project “Boundary layer measurements in the high Arctic” (CATS_BL) within the scope of a joint German–Russian project. In addition to SODAR-derived vertical profiles of wind speed and direction, a suite of complementary measurements at the observatory was available. ABL measurements were used for verification of the regional climate model COSMO-CLM (CCLM) with a 5 km resolution for 2017–2020. The CCLM was run with nesting in ERA5 data in a forecast mode for the measurement period. SODAR measurements were mostly limited to wind speeds <12 m/s since the signal was often lost for higher winds. The SODAR data showed a topographical channeling effect for the wind field in the lowest 100 m and some low-level jets (LLJs). The verification of the CCLM with near-surface data of the observatory showed good agreement for the wind and a negative bias for the 2 m temperature. The comparison with SODAR data showed a positive bias for the wind speed of about 1 m/s below 100 m, which increased to 1.5 m/s for higher levels. In contrast to the SODAR data, the CCLM data showed the frequent presence of LLJs associated with the topographic channeling in Shokalsky Strait. Although SODAR wind profiles are limited in range and have a lot of gaps, they represent a valuable data set for model verification. However, a full picture of the ABL structure and the climatology of channeling events could be obtained only with the model data. The climatological evaluation showed that the wind field at Cape Baranova was not only influenced by direct topographic channeling under conditions of southerly winds through the Shokalsky Strait but also by channeling through a mountain gap for westerly winds. LLJs were detected in 37% of all profiles and most LLJs were associated with channeling, particularly LLJs with a jet speed ≥ 15 m/s (which were 29% of all LLJs). The analysis of the simulated 10 m wind field showed that the 99%-tile of the wind speed reached 18 m/s and clearly showed a dipole structure of channeled wind at both exits of Shokalsky Strait. The climatology of channeling events showed that this dipole structure was caused by the frequent occurrence of channeling at both exits. Channeling events lasting at least 12 h occurred on about 62 days per year at both exits of Shokalsky Strait.
Water-deficit stress, usually shortened to water- or drought stress, is one of the most critical abiotic stressors limiting plant growth, crop yield and quality concerning food production. Today, agriculture consumes about 80-90% of the global freshwater used by humans and about two thirds are used for crop irrigation. An increasing world population and a predicted rise of 1.0-2.5-°C in the annual mean global temperature as a result of climate change will further increase the demand of water in agriculture. Therefore, one of the most challenging tasks of our generation is to reduce the amount water used per unit yield to satisfy the second UN Sustainable Development Goal and to ensure global food security. Precision agriculture offers new farming methods with the goal to improve the efficiency of crop production by a sustainable use of resources. Plant responses to water stress are complex and co-occur with other environmental stresses under natural conditions. In general, water stress causes plant physiological and biochemical changes that depend on the severity and the duration of the actual plant water deficit. Stomatal closure is one of the first responses to plant water stress causing a decrease in plant transpiration and thus an increase in plant temperature. Prolonged or severe water stress leads to irreversible damage to the photosynthetic machinery and is associated with decreasing chlorophyll content and leaf structural changes (e.g., leaf rolling). Since a crop can already be irreversibly damaged by only mild water deficit, a pre-visual detection of water stress symptoms is essential to avoid yield loss. Remote sensing offers a non-destructive and spatio-temporal method for measuring numerous physiological, biochemical and structural crop characteristics at different scales and thus is one of the key technologies used in precision agriculture. With respect to the detection of plant responses to water stress, the current state-of-the-art hyperspectral remote sensing imaging techniques are based on measurements of thermal infrared emission (TIR; 8-14 -µm), visible, near- and shortwave infrared reflectance (VNIR/SWIR; 0.4-2.5 -µm), and sun-induced fluorescence (SIF; 0.69 and 0.76 -µm). It is, however, still unclear how sensitive these techniques are with respect to water stress detection. Therefore, the overall aim of this dissertation was to provide a comparative assessment of remotely sensed measures from the TIR, SIF, and VNIR/SWIR domains for their ability to detect plant responses to water stress at ground- and airborne level. The main findings of this thesis are: (i) temperature-based indices (e.g., CWSI) were most sensitive for the detection of plant water stress in comparison to reflectance-based VNIR/SWIR indices (e.g., PRI) and SIF at both, ground- and airborne level, (ii) for the first time, spectral emissivity as measured by the new hyperspectral TIR instrument could be used to detect plant water stress at ground level. Based on these findings it can be stated that hyperspectral TIR remote sensing offers great potential for the detection of plant responses to water stress at ground- and airborne level based on both TIR key variables, surface temperature and spectral emissivity. However, the large-scale application of water stress detection based on hyperspectral TIR measures in precision agriculture will be challenged by several problems: (i) missing thresholds of temperature-based indices (e.g., CWSI) for the application in irrigation scheduling, (ii) lack of current TIR satellite missions with suitable spectral and spatial resolution, (iii) lack of appropriate data processing schemes (including atmosphere correction and temperature emissivity separation) for hyperspectral TIR remote sensing at airborne- and satellite level.
Although gravitropism forces trees to grow vertically, stems have shown to prefer specific orientations. Apart from wind deforming the tree shape, lateral light can result in prevailing inclination directions. In recent years a species dependent interaction between gravitropism and phototropism, resulting in trunks leaning down-slope, has been confirmed, but a terrestrial investigation of such factors is limited to small scale surveys. ALS offers the opportunity to investigate trees remotely. This study shall clarify whether ALS detected tree trunks can be used to identify prevailing trunk inclinations. In particular, the effect of topography, wind, soil properties and scan direction are investigated empirically using linear regression models. 299.000 significantly inclined stems were investigated. Species-specific prevailing trunk orientations could be observed. About 58% of the inclination and 19% of the orientation could be explained by the linear models, while the tree species, tree height, aspect and slope could be identified as significant factors. The models indicate that deciduous trees tend to lean down-slope, while conifers tend to lean leeward. This study has shown that ALS is suitable to investigate the trunk orientation on larger scales. It provides empirical evidence for the effect of phototropism and wind on the trunk orientation.
Amphibian diversity in the Amazonian floating meadows: a Hanski core-satellite species system
(2021)
The Amazon catchment is the largest river basin on earth, and up to 30% of its waters flow across floodplains. In its open waters, floating plants known as floating meadows abound. They can act as vectors of dispersal for their associated fauna and, therefore, can be important for the spatial structure of communities. Here, we focus on amphibian diversity in the Amazonian floating meadows over large spatial scales. We recorded 50 amphibian species over 57 sites, covering around 7000 km along river courses. Using multi-site generalised dissimilarity modelling of zeta diversity, we tested Hanski's core-satellite hypothesis and identified the existence of two functional groups of species operating under different ecological processes in the floating meadows. ‘Core' species are associated with floating meadows, while ‘satellite' species are associated with adjacent environments, being only occasional or accidental occupants of the floating vegetation. At large scales, amphibian diversity in floating meadows is mostly determined by stochastic (i.e. random/neutral) processes, whereas at regional scales, climate and deterministic (i.e. niche-based) processes are central drivers. Compared with the turnover of ‘core' species, the turnover of ‘satellite' species increases much faster with distances and is also controlled by a wider range of climatic features. Distance is not a limiting factor for ‘core' species, suggesting that they have a stronger dispersal ability even over large distances. This is probably related to the existence of passive long-distance dispersal of individuals along rivers via vegetation rafts. In this sense, Amazonian rivers can facilitate dispersal, and this effect should be stronger for species associated with riverine habitats such as floating meadows.
For grape canopy pixels captured by an unmanned aerial vehicle (UAV) tilt-mounted RedEdge-M multispectral sensor in a sloped vineyard, an in situ Walthall model can be established with purely image-based methods. This was derived from RedEdge-M directional reflectance and a vineyard 3D surface model generated from the same imagery. The model was used to correct the angular effects in the reflectance images to form normalized difference vegetation index (NDVI)orthomosaics of different view angles. The results showed that the effect could be corrected to a certain scope, but not completely. There are three drawbacks that might restrict a successful angular model construction and correction: (1) the observable micro shadow variation on the canopy enabled by the high resolution; (2) the complexity of vine canopies that causes an inconsistency between reflectance and canopy geometry, including effects such as micro shadows and near-infrared (NIR) additive effects; and (3) the resolution limit of a 3D model to represent the accurate real-world optical geometry. The conclusion is that grape canopies might be too inhomogeneous for the tested method to perform the angular correction in high quality.
A sustainable development of forests and their ecosystem services requires the monitoring of the forests" state and changes as well as the prediction of their future development. To achieve the latter, eco-physiological forest growth models are usually applied. These models require calibration and validation with forestry reference data. This data includes forest structural parameters such as tree height or stem diameter which are easy to measure and can be used to estimate the core model parameters, i.e. the tree- biomass pools. The methods traditionally applied to derive the structural parameters are mainly manual and time-consuming. Hence, the in situ data acquisition is inefficient and limited in its ability to capture the vertical and horizontal variability in stand structure. Ground-based remote sensing bears the potential to overcome the limitations of the traditional methods. As they can be automated, ground-based remote sensing methods allow a much more efficient data acquisition and a larger spatial coverage. They are also able to capture forest structure in its three dimensions. Nevertheless, at present further research is required, in particular with respect to the practical integration of ground-based remote sensing data into forest growth models as well as regarding factors influencing the structural parameter retrieval from this data. Therefore, the goal of this PhD thesis was to investigate the influencing factors of two ground-based remote sensing methods (terrestrial laser scanning and hemispherical photography), which have not or only scarcely been studied to date. In addition, the use of forest structural parameters derived from these methods for the calibration of a forest growth model was assessed. Both goals were achieved. The results of this thesis could contribute significantly to a comprehensive assessment of ground-based remote sensing and its potential to derive the forest structural parameters. However, the use of these methods to calibrate forest growth models proved to be limited. An optimized data sampling design is expected to eliminate the major limitations, though. Furthermore, the combination of ground-based, airborne, and satellite remote sensing sensors was suggested to provide an optimized framework for the general integration of remotely sensed data into forest growth models. This combination of remote sensing observations at different scales will contribute greatly to a modern forest management with the purpose of warranting a sustainable forest development even under growing economic and ecological pressures.
Dry tropical forests are facing massive conversion and degradation processes and they are the most endangered forest type worldwide. One of the largest dry forest types are Miombo forests that stretch across the Southern African subcontinent and the proportionally largest part of this type can be found in Angola. The study site of this thesis is located in south-central Angola. The country still suffers from the consequences of the 27 years of civil war (1975-2002) that provides a unique socio-economic setting. The natural characteristics are a representative cross section which proved ideal to study underlying drivers as well as current and retrospective land use change dynamics. The major land change dynamic of the study area is the conversion of Miombo forests to cultivation areas as well as modification of forest areas, i.e. degradation, due to the extraction of natural resources. With future predictions of population growth, climate change and large scale investments, land pressure is expected to further increase. To fully understand the impacts of these dynamics, both, conversion and modification of forest areas were assessed. By using the conceptual framework of ecosystem services, the predominant trade-off between food and timber in the study area was analyzed, including retrospective dynamics and impacts. This approach accounts for products that contribute directly or indirectly to human well-being. For this purpose, data from the Landsat archive since 1989 until 2013 was applied in different study area adapted approaches. The objectives of these approaches were (I) to detect underlying drivers and their temporal and spatial extent of impact, (II) to describe modification and conversion processes that reach from times of armed conflicts over the ceasefire and the post-war period and (III) to provide an assessment of drivers and impacts in a comparative setting. It could be shown that major underlying drivers for the conversion processes are resettlement dynamics as well as the location and quality of streets and settlements. Furthermore, forests that are selectively used for resource extraction have a higher chance of being converted to a field. Drivers of forest degradation are on one hand also strongly connected to settlement and infrastructural structures. But also to a large extent to fire dynamics that occur mostly in more remote and presumably undisturbed forest areas. The loss of woody biomass as well as its slow recovery after the abandonment of fields could be quantified and stands in large contrast to the amount of potentially cultivated food that is necessarily needed. The results of the thesis support the fundamental understanding of drivers and impacts in the study area and can thus contribute to a sustainable resource management.
The parameterization of the boundary layer is a challenge for regional climate models of the Arctic. In particular, the stable boundary layer (SBL) over Greenland, being the main driver for substantial katabatic winds over the slopes, is simulated differently by different regional climate models or using different parameterizations of the same model. However, verification data sets with high-resolution profiles of the katabatic wind are rare. In the present paper, detailed aircraft measurements of profiles in the katabatic wind and automatic weather station data during the experiment KABEG (Katabatic wind and boundary-layer front experiment around Greenland) in April and May 1997 are used for the verification of the regional climate model COSMO-CLM (CCLM) nested in ERA-Interim reanalyses. CCLM is used in a forecast mode for the whole Arctic with 15 km resolution and is run in the standard configuration of SBL parameterization and with modified SBL parameterization. In the modified version, turbulent kinetic energy (TKE) production and the transfer coefficients for turbulent fluxes in the SBL are reduced, leading to higher stability of the SBL. This leads to a more realistic representation of the daily temperature cycle and of the SBL structure in terms of temperature and wind profiles for the lowest 200 m.